Plungers - Spring - No Handle - Stainless - Stainless Nose

Plungers -> Spring -> No Handle -> Stainless -> Stainless Nose

There are 132 products in the sub-categories of Plungers - Spring - No Handle - Stainless - Stainless Nose. Scroll down or follow the link to Plungers - Spring - No Handle - Stainless - Stainless Nose in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Stainless Nose Stainless No Handle Spring Plungers. 303 Stainless Steel.

  • A compact mechanical component with a spring-loaded ball or pin inside a housing that applies consistent, predictable force. Internal spring compresses when pressure is applied to the ball or pin, allowing it to settle into designated positions or recess.
  • Provides a reliable holding or locating mechanism in various industrial applications where precise alignment or securing of parts is needed.
  • Also known as ball plungers or spring-loaded pins.
  • Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Plungers - Spring - No Handle - Stainless - Stainless Nose category on the Small Parts & Bearings online store.
Thread Size (A) Thread Length (B) Initial Pressure (F1) Final Pressure (F2) Tip Diameter (D) Tip Length (C) Indicative
Image
Spring Plungers - M10 - 10x1.5mm - 16 mm - 4 N No Handle - Stainless Steel Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
16.0
mm

(Equiv. 0.63 in.)
Initial Pressure (F1)
4.000
N
Final Pressure (F2)
15.00
N
Tip Diameter (D)
5.00
mm
Tip Length (C)
2.50
mm
Spring Plungers - M10 - 10x1.5mm - 16 mm - 4 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 16 mm    Drive: 5.0mm Hex   
Part Number: PLST-100M-016-S3-015 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$6.32 AUD
$7.58 AUD $6.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A) Thread Length (B) Initial Pressure (F1) Final Pressure (F2) Indicative
Image
Spring Plungers - M10 - 10x1.5mm - 16 mm - 4 N No Handle - Stainless Steel Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
16.0
mm

(Equiv. 0.63 in.)
Initial Pressure (F1)
4.000
N
Final Pressure (F2)
15.00
N
Spring Plungers - M10 - 10x1.5mm - 16 mm - 4 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 5.00 mm    Tip Length (C): 2.50 mm    Body Length (B): 16 mm    Drive: 5.0mm Hex   
Part Number: PLST-100M-016-S3-015 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$6.32 AUD
$7.58 AUD $6.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M3 - 3x0.5mm - 10 mm - 1 N No Handle - Stainless Steel Plunger
Thread Size (A)
M3 (3x0.5mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
1.000
N
Final Pressure (F2)
2.00
N
Tip Diameter (D)
1.20
mm
Tip Length (C)
1.00
mm
Spring Plungers - M3 - 3x0.5mm - 10 mm - 1 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 10 mm    Drive: 1.5mm Hex   
Part Number: PLST-030M-100-S3-002 (Each)
10 Available Now | Further orders can be expected around Sun, Feb 01, 2026
$6.41 AUD
$6.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 10 available can be backordered.
Spring Plungers - M3 - 3x0.5mm - 10 mm - 1 N No Handle - Stainless Steel Plunger
Thread Size (A)
M3 (3x0.5mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
1.000
N
Final Pressure (F2)
2.00
N
Spring Plungers - M3 - 3x0.5mm - 10 mm - 1 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.20 mm    Tip Length (C): 1.00 mm    Body Length (B): 10 mm    Drive: 1.5mm Hex   
Part Number: PLST-030M-100-S3-002 (Each)
10 Available Now | Further orders can be expected around Sun, Feb 01, 2026
$6.41 AUD
$6.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. Backorder if more than 10.
Spring Plungers - M3 - 3x0.5mm - 10 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
M3 (3x0.5mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
2.000
N
Final Pressure (F2)
5.00
N
Tip Diameter (D)
1.00
mm
Tip Length (C)
2.00
mm
Spring Plungers - M3 - 3x0.5mm - 10 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 10 mm    Drive: 1.5mm Hex   
Part Number: PLST-030M-010-S3-005 (Each)
17 Available Now | Further orders can be expected around Sun, Feb 01, 2026
$5.95 AUD
$5.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 17 available can be backordered.
Spring Plungers - M3 - 3x0.5mm - 10 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
M3 (3x0.5mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
2.000
N
Final Pressure (F2)
5.00
N
Spring Plungers - M3 - 3x0.5mm - 10 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.00 mm    Tip Length (C): 2.00 mm    Body Length (B): 10 mm    Drive: 1.5mm Hex   
Part Number: PLST-030M-010-S3-005 (Each)
17 Available Now | Further orders can be expected around Sun, Feb 01, 2026
$5.95 AUD
$5.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

17 Available Now. Backorder if more than 17.
Spring Plungers - 3/8-16 UNC - 9.53mm - 22.1 mm - 10 N No Handle - Stainless Steel Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
22.1
mm

(Equiv. 0.87 in.)
Initial Pressure (F1)
10.0
N
Final Pressure (F2)
47.0
N
Tip Diameter (D)
4.1
mm
Tip Length (C)
3.1
mm
Spring Plungers - 3/8-16 UNC - 9.53mm - 22.1 mm - 10 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 22.1 mm    Drive: 2.38mm Hex   
Part Number: PLST-095C-221-S3-047 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$142.14 AUD
$142.14 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 22.1 mm - 10 N No Handle - Stainless Steel Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
22.1
mm

(Equiv. 0.87 in.)
Initial Pressure (F1)
10.0
N
Final Pressure (F2)
47.0
N
Spring Plungers - 3/8-16 UNC - 9.53mm - 22.1 mm - 10 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 4.1 mm    Tip Length (C): 3.1 mm    Body Length (B): 22.1 mm    Drive: 2.38mm Hex   
Part Number: PLST-095C-221-S3-047 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$142.14 AUD
$142.14 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 6-32 UNC - 3.5mm - 9.5 mm - 4.5 N No Handle - Stainless Steel Plunger
Thread Size (A)
6-32 UNC (3.5mm)

Thread Length (B)
9.5
mm

(Equiv. 0.374 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
7.1
N
Tip Diameter (D)
1.1
mm
Tip Length (C)
1.6
mm
Spring Plungers - 6-32 UNC - 3.5mm - 9.5 mm - 4.5 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 9.5 mm    Drive: Hex   
Part Number: PLST-035C-095-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.86 AUD
$19.04 AUD $15.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 6-32 UNC - 3.5mm - 9.5 mm - 4.5 N No Handle - Stainless Steel Plunger
Thread Size (A)
6-32 UNC (3.5mm)

Thread Length (B)
9.5
mm

(Equiv. 0.374 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
7.1
N
Spring Plungers - 6-32 UNC - 3.5mm - 9.5 mm - 4.5 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.1 mm    Tip Length (C): 1.6 mm    Body Length (B): 9.5 mm    Drive: Hex   
Part Number: PLST-035C-095-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.86 AUD
$19.04 AUD $15.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 6-32 UNC - 3.5mm - 13.5 mm - 2.2 N No Handle - Stainless Steel Plunger
Thread Size (A)
6-32 UNC (3.5mm)

Thread Length (B)
13.5
mm

(Equiv. 0.531 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
6.7
N
Tip Diameter (D)
1.1
mm
Tip Length (C)
1.6
mm
Spring Plungers - 6-32 UNC - 3.5mm - 13.5 mm - 2.2 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 13.5 mm    Drive: Hex   
Part Number: PLST-035C-135-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$13.05 AUD
$15.65 AUD $13.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 6-32 UNC - 3.5mm - 13.5 mm - 2.2 N No Handle - Stainless Steel Plunger
Thread Size (A)
6-32 UNC (3.5mm)

Thread Length (B)
13.5
mm

(Equiv. 0.531 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
6.7
N
Spring Plungers - 6-32 UNC - 3.5mm - 13.5 mm - 2.2 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.1 mm    Tip Length (C): 1.6 mm    Body Length (B): 13.5 mm    Drive: Hex   
Part Number: PLST-035C-135-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$13.05 AUD
$15.65 AUD $13.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 6-32 UNC - 3.5mm - 13.5 mm - 6.7 N No Handle - Stainless Steel Plunger
Thread Size (A)
6-32 UNC (3.5mm)

Thread Length (B)
13.5
mm

(Equiv. 0.531 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
20.0
N
Tip Diameter (D)
1.1
mm
Tip Length (C)
1.6
mm
Spring Plungers - 6-32 UNC - 3.5mm - 13.5 mm - 6.7 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 13.5 mm    Drive: Hex   
Part Number: PLST-035C-135-S3-020 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$16.14 AUD
$19.36 AUD $16.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 6-32 UNC - 3.5mm - 13.5 mm - 6.7 N No Handle - Stainless Steel Plunger
Thread Size (A)
6-32 UNC (3.5mm)

Thread Length (B)
13.5
mm

(Equiv. 0.531 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
20.0
N
Spring Plungers - 6-32 UNC - 3.5mm - 13.5 mm - 6.7 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.1 mm    Tip Length (C): 1.6 mm    Body Length (B): 13.5 mm    Drive: Hex   
Part Number: PLST-035C-135-S3-020 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$16.14 AUD
$19.36 AUD $16.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M4 - 4x0.7mm - 9 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
9.0
mm

(Equiv. 0.354 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
7.0
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.5
mm
Spring Plungers - M4 - 4x0.7mm - 9 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 9.0 mm    Drive: Slotted   
Part Number: PLST-040M-090-S3-007 (Each)
1 Available Now | Further orders can be expected around Sun, Jan 18, 2026
$10.41 AUD
$21.23 AUD $10.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 1 available can be backordered.
Spring Plungers - M4 - 4x0.7mm - 9 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
9.0
mm

(Equiv. 0.354 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
7.0
N
Spring Plungers - M4 - 4x0.7mm - 9 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.5 mm    Body Length (B): 9.0 mm    Drive: Slotted   
Part Number: PLST-040M-090-S3-007 (Each)
1 Available Now | Further orders can be expected around Sun, Jan 18, 2026
$10.41 AUD
$21.23 AUD $10.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. Backorder if more than 1.
Spring Plungers - M4 - 4x0.7mm - 9 mm - 6 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
9.0
mm

(Equiv. 0.354 in.)
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
20.0
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.5
mm
Spring Plungers - M4 - 4x0.7mm - 9 mm - 6 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 9.0 mm    Drive: Slotted   
Part Number: PLST-040M-090-S3-020 (PK-10)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$129.95 AUD
$129.95 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M4 - 4x0.7mm - 9 mm - 6 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
9.0
mm

(Equiv. 0.354 in.)
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
20.0
N
Spring Plungers - M4 - 4x0.7mm - 9 mm - 6 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.5 mm    Body Length (B): 9.0 mm    Drive: Slotted   
Part Number: PLST-040M-090-S3-020 (PK-10)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$129.95 AUD
$129.95 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M4 - 4x0.7mm - 10 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
2.000
N
Final Pressure (F2)
5.00
N
Tip Diameter (D)
2.10
mm
Tip Length (C)
1.20
mm
Spring Plungers - M4 - 4x0.7mm - 10 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 10 mm    Drive: 2.0mm Hex   
Part Number: PLST-040M-010-S3-005 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$4.68 AUD
$5.62 AUD $4.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M4 - 4x0.7mm - 10 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
2.000
N
Final Pressure (F2)
5.00
N
Spring Plungers - M4 - 4x0.7mm - 10 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 2.10 mm    Tip Length (C): 1.20 mm    Body Length (B): 10 mm    Drive: 2.0mm Hex   
Part Number: PLST-040M-010-S3-005 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$4.68 AUD
$5.62 AUD $4.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M4 - 4x0.7mm - 10 mm - 3 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
3.000
N
Final Pressure (F2)
10.00
N
Tip Diameter (D)
1.60
mm
Tip Length (C)
2.00
mm
Spring Plungers - M4 - 4x0.7mm - 10 mm - 3 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 10 mm    Drive: 2.0mm Hex   
Part Number: PLST-040M-010-S3-010 (PK-20)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$72.05 AUD
$122.51 AUD $72.05 AUD
Priced, Stocked and Sold Per 20 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M4 - 4x0.7mm - 10 mm - 3 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
3.000
N
Final Pressure (F2)
10.00
N
Spring Plungers - M4 - 4x0.7mm - 10 mm - 3 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.60 mm    Tip Length (C): 2.00 mm    Body Length (B): 10 mm    Drive: 2.0mm Hex   
Part Number: PLST-040M-010-S3-010 (PK-20)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$72.05 AUD
$122.51 AUD $72.05 AUD
Priced, Stocked and Sold Per 20 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M4 - 4x0.7mm - 10 mm - 4 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
4.000
N
Final Pressure (F2)
12.00
N
Tip Diameter (D)
2.10
mm
Tip Length (C)
1.20
mm
Spring Plungers - M4 - 4x0.7mm - 10 mm - 4 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 10 mm    Drive: 2.0mm Hex   
Part Number: PLST-040M-010-S3-012 (PK-20)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$77.59 AUD
$132.00 AUD $77.59 AUD
Priced, Stocked and Sold Per 20 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M4 - 4x0.7mm - 10 mm - 4 N No Handle - Stainless Steel Plunger
Thread Size (A)
M4 (4x0.7mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
4.000
N
Final Pressure (F2)
12.00
N
Spring Plungers - M4 - 4x0.7mm - 10 mm - 4 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 2.10 mm    Tip Length (C): 1.20 mm    Body Length (B): 10 mm    Drive: 2.0mm Hex   
Part Number: PLST-040M-010-S3-012 (PK-20)
Out of Stock | Backorder Now | Orders can be expected around Sun, Feb 01, 2026
$77.59 AUD
$132.00 AUD $77.59 AUD
Priced, Stocked and Sold Per 20 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 8.9 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
8.9
mm

(Equiv. 0.35 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
7.0
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.5
mm
Spring Plungers - 8-32 UNC - 4.17mm - 8.9 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 8.9 mm    Drive: Slotted   
Part Number: PLST-042C-089-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.23 AUD
$18.27 AUD $15.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 8.9 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
8.9
mm

(Equiv. 0.35 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
7.0
N
Spring Plungers - 8-32 UNC - 4.17mm - 8.9 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.5 mm    Body Length (B): 8.9 mm    Drive: Slotted   
Part Number: PLST-042C-089-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.23 AUD
$18.27 AUD $15.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 8.9 mm - 6 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
8.9
mm

(Equiv. 0.35 in.)
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
20.0
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.5
mm
Spring Plungers - 8-32 UNC - 4.17mm - 8.9 mm - 6 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 8.9 mm    Drive: Slotted   
Part Number: PLST-042C-089-S3-020 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$13.59 AUD
$16.31 AUD $13.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 8.9 mm - 6 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
8.9
mm

(Equiv. 0.35 in.)
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
20.0
N
Spring Plungers - 8-32 UNC - 4.17mm - 8.9 mm - 6 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.5 mm    Body Length (B): 8.9 mm    Drive: Slotted   
Part Number: PLST-042C-089-S3-020 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$13.59 AUD
$16.31 AUD $13.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 2.2 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
6.7
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.3
mm
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 2.2 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042C-111-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.05 AUD
$18.05 AUD $15.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 2.2 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
6.7
N
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 2.2 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.3 mm    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042C-111-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.05 AUD
$18.05 AUD $15.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 4.5 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
14.5
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
2.4
mm
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 4.5 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042C-111-S3-014 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$18.41 AUD
$22.09 AUD $18.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 4.5 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
14.5
N
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 4.5 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 2.4 mm    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042C-111-S3-014 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$18.41 AUD
$22.09 AUD $18.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 6.7 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
21.1
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.3
mm
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 6.7 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042C-111-S3-021 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$11.68 AUD
$14.02 AUD $11.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 6.7 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
21.1
N
Spring Plungers - 8-32 UNC - 4.17mm - 11.1 mm - 6.7 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.3 mm    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042C-111-S3-021 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$11.68 AUD
$14.02 AUD $11.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 15.9 mm - 3.1 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
3.1
N
Final Pressure (F2)
10.2
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
2.4
mm
Spring Plungers - 8-32 UNC - 4.17mm - 15.9 mm - 3.1 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 15.9 mm    Drive: Hex   
Part Number: PLST-042C-159-S3-010 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$14.32 AUD
$17.18 AUD $14.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-32 UNC - 4.17mm - 15.9 mm - 3.1 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-32 UNC (4.17mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
3.1
N
Final Pressure (F2)
10.2
N
Spring Plungers - 8-32 UNC - 4.17mm - 15.9 mm - 3.1 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 2.4 mm    Body Length (B): 15.9 mm    Drive: Hex   
Part Number: PLST-042C-159-S3-010 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$14.32 AUD
$17.18 AUD $14.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 8.9 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
8.9
mm

(Equiv. 0.35 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
7.0
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.5
mm
Spring Plungers - 8-36 UNF - 4.17mm - 8.9 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 8.9 mm    Drive: Slotted   
Part Number: PLST-042F-089-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.23 AUD
$18.27 AUD $15.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 8.9 mm - 2 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
8.9
mm

(Equiv. 0.35 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
7.0
N
Spring Plungers - 8-36 UNF - 4.17mm - 8.9 mm - 2 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.5 mm    Body Length (B): 8.9 mm    Drive: Slotted   
Part Number: PLST-042F-089-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.23 AUD
$18.27 AUD $15.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 8.9 mm - 6 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
8.9
mm

(Equiv. 0.35 in.)
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
20.0
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.5
mm
Spring Plungers - 8-36 UNF - 4.17mm - 8.9 mm - 6 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 8.9 mm    Drive: Slotted   
Part Number: PLST-042F-089-S3-020 (PK-10)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$130.32 AUD
$130.32 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 8.9 mm - 6 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
8.9
mm

(Equiv. 0.35 in.)
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
20.0
N
Spring Plungers - 8-36 UNF - 4.17mm - 8.9 mm - 6 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.5 mm    Body Length (B): 8.9 mm    Drive: Slotted   
Part Number: PLST-042F-089-S3-020 (PK-10)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$130.32 AUD
$130.32 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 2.2 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
6.7
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.3
mm
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 2.2 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042F-111-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$13.50 AUD
$16.20 AUD $13.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 2.2 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
6.7
N
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 2.2 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.3 mm    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042F-111-S3-007 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$13.50 AUD
$16.20 AUD $13.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 4.5 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
14.5
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
2.4
mm
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 4.5 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042F-111-S3-014 (PK-250)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$4,409.95 AUD
$4,409.95 AUD
Priced, Stocked and Sold Per 250 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 4.5 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
14.5
N
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 4.5 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 2.4 mm    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042F-111-S3-014 (PK-250)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$4,409.95 AUD
$4,409.95 AUD
Priced, Stocked and Sold Per 250 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 6.7 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
21.1
N
Tip Diameter (D)
1.8
mm
Tip Length (C)
1.3
mm
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 6.7 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042F-111-S3-021 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$14.59 AUD
$17.51 AUD $14.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 6.7 N No Handle - Stainless Steel Plunger
Thread Size (A)
8-36 UNF (4.17mm)

Thread Length (B)
11.1
mm

(Equiv. 0.437 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
21.1
N
Spring Plungers - 8-36 UNF - 4.17mm - 11.1 mm - 6.7 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 1.8 mm    Tip Length (C): 1.3 mm    Body Length (B): 11.1 mm    Drive: Slotted   
Part Number: PLST-042F-111-S3-021 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$14.59 AUD
$17.51 AUD $14.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 10-32 UNF - 4.76mm - 11.9 mm - 3 N No Handle - Stainless Steel Plunger
Thread Size (A)
10-32 UNF (4.76mm)

Thread Length (B)
11.9
mm

(Equiv. 0.469 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
10.0
N
Tip Diameter (D)
2.3
mm
Tip Length (C)
2.0
mm
Spring Plungers - 10-32 UNF - 4.76mm - 11.9 mm - 3 N No Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.9 mm    Drive: Slotted   
Part Number: PLST-048F-119-S3-010 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.59 AUD
$18.71 AUD $15.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 10-32 UNF - 4.76mm - 11.9 mm - 3 N No Handle - Stainless Steel Plunger
Thread Size (A)
10-32 UNF (4.76mm)

Thread Length (B)
11.9
mm

(Equiv. 0.469 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
10.0
N
Spring Plungers - 10-32 UNF - 4.76mm - 11.9 mm - 3 N No Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 2.3 mm    Tip Length (C): 2.0 mm    Body Length (B): 11.9 mm    Drive: Slotted   
Part Number: PLST-048F-119-S3-010 (Each)
Out of Stock | Backorder Now | Orders can be expected around Sun, Jan 18, 2026
$15.59 AUD
$18.71 AUD $15.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.