Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal

Plungers -> Spring -> Knurled Handle -> Locking -> Stainless-Acetal

There are 40 products in the sub-categories of Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal. Scroll down or follow the link to Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Stainless-Acetal Locking Knurled Handle Spring Plungers. Steel body with acetal nose

  • A compact mechanical component with a spring-loaded ball or pin inside a housing that applies consistent, predictable force. Internal spring compresses when pressure is applied to the ball or pin, allowing it to settle into designated positions or recess.
  • Provides a reliable holding or locating mechanism in various industrial applications where precise alignment or securing of parts is needed.
  • Also known as ball plungers or spring-loaded pins.
  • Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal category on the Small Parts & Bearings online store.
Thread Size (A) Thread Length (B) Initial Pressure (F1) Final Pressure (F2) Tip Diameter (D) Tip Length (C) Indicative
Image
Spring Plungers - M6 - 6x1mm - 12.7 mm - 2 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
11.0
N
Tip Diameter (D)
3.7
mm
Tip Length (C)
3.2
mm
Spring Plungers - M6 - 6x1mm - 12.7 mm - 2 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 6.3 mm    Head Diameter (F): 12.7 mm   
Part Number: PLST-060-127-HKASL-011 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$68.77 AUD
$68.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A) Thread Length (B) Initial Pressure (F1) Final Pressure (F2) Indicative
Image
Spring Plungers - M6 - 6x1mm - 12.7 mm - 2 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
11.0
N
Spring Plungers - M6 - 6x1mm - 12.7 mm - 2 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 3.7 mm    Tip Length (C): 3.2 mm    Head Height (E): 6.3 mm    Head Diameter (F): 12.7 mm   
Part Number: PLST-060-127-HKASL-011 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$68.77 AUD
$68.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M6 - 6x1mm - 12.7 mm - 2 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
11.0
N
Tip Diameter (D)
3.7
mm
Tip Length (C)
3.2
mm
Spring Plungers - M6 - 6x1mm - 12.7 mm - 2 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 6.3 mm    Head Diameter (F): 12.7 mm    Additional: With Locking Element   
Part Number: PLST-060-127-HKASLLK-011 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$80.77 AUD
$80.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M6 - 6x1mm - 12.7 mm - 2 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
2.0
N
Final Pressure (F2)
11.0
N
Spring Plungers - M6 - 6x1mm - 12.7 mm - 2 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 3.7 mm    Tip Length (C): 3.2 mm    Head Height (E): 6.3 mm    Head Diameter (F): 12.7 mm    Additional: With Locking Element   
Part Number: PLST-060-127-HKASLLK-011 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$80.77 AUD
$80.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M6 - 6x1mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
22.0
N
Tip Diameter (D)
3.7
mm
Tip Length (C)
3.2
mm
Spring Plungers - M6 - 6x1mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 6.3 mm    Head Diameter (F): 12.7 mm    Additional: With Locking Element   
Part Number: PLST-060-127-HKASLLK-022 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$79.41 AUD
$79.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M6 - 6x1mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
22.0
N
Spring Plungers - M6 - 6x1mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 3.7 mm    Tip Length (C): 3.2 mm    Head Height (E): 6.3 mm    Head Diameter (F): 12.7 mm    Additional: With Locking Element   
Part Number: PLST-060-127-HKASLLK-022 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$79.41 AUD
$79.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M6 - 6x1mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
22.0
N
Tip Diameter (D)
3.7
mm
Tip Length (C)
3.2
mm
Spring Plungers - M6 - 6x1mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 6.3 mm    Head Diameter (F): 12.7 mm   
Part Number: PLST-060-127-HKASL-022 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$68.32 AUD
$68.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M6 - 6x1mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
22.0
N
Spring Plungers - M6 - 6x1mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 3.7 mm    Tip Length (C): 3.2 mm    Head Height (E): 6.3 mm    Head Diameter (F): 12.7 mm   
Part Number: PLST-060-127-HKASL-022 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$68.32 AUD
$68.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 2.2 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
11.1
N
Tip Diameter (D)
3.7
mm
Tip Length (C)
3.2
mm
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 2.2 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 6.4 mm    Head Diameter (F): 12.7 mm   
Part Number: PLST-064C-127-HKASL-011 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$73.41 AUD
$73.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 2.2 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
11.1
N
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 2.2 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 3.7 mm    Tip Length (C): 3.2 mm    Head Height (E): 6.4 mm    Head Diameter (F): 12.7 mm   
Part Number: PLST-064C-127-HKASL-011 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$73.41 AUD
$73.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 2.2 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
11.1
N
Tip Diameter (D)
3.7
mm
Tip Length (C)
3.2
mm
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 2.2 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 6.4 mm    Head Diameter (F): 12.7 mm    Additional: With Locking Element   
Part Number: PLST-064C-127-HKASLLK-011 (PK-250)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$15,587.50 AUD
$15,587.50 AUD
Priced, Stocked and Sold Per 250 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 2.2 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
11.1
N
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 2.2 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 3.7 mm    Tip Length (C): 3.2 mm    Head Height (E): 6.4 mm    Head Diameter (F): 12.7 mm    Additional: With Locking Element   
Part Number: PLST-064C-127-HKASLLK-011 (PK-250)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$15,587.50 AUD
$15,587.50 AUD
Priced, Stocked and Sold Per 250 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
22.2
N
Tip Diameter (D)
3.7
mm
Tip Length (C)
3.2
mm
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 6.4 mm    Head Diameter (F): 12.7 mm    Additional: With Locking Element   
Part Number: PLST-064C-127-HKASLLK-022 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$69.05 AUD
$69.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
22.2
N
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 3.7 mm    Tip Length (C): 3.2 mm    Head Height (E): 6.4 mm    Head Diameter (F): 12.7 mm    Additional: With Locking Element   
Part Number: PLST-064C-127-HKASLLK-022 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$69.05 AUD
$69.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
22.2
N
Tip Diameter (D)
3.7
mm
Tip Length (C)
3.2
mm
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 6.4 mm    Head Diameter (F): 12.7 mm   
Part Number: PLST-064C-127-HKASL-022 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$67.14 AUD
$67.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
22.2
N
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 3.7 mm    Tip Length (C): 3.2 mm    Head Height (E): 6.4 mm    Head Diameter (F): 12.7 mm   
Part Number: PLST-064C-127-HKASL-022 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$67.14 AUD
$67.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
13.4
N
Tip Diameter (D)
4.6
mm
Tip Length (C)
4.8
mm
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.1 mm    Head Diameter (F): 15.9 mm    Additional: With Locking Element   
Part Number: PLST-079C-159-HKASLLK-013 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$78.68 AUD
$94.42 AUD $78.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
13.4
N
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 4.6 mm    Tip Length (C): 4.8 mm    Head Height (E): 7.1 mm    Head Diameter (F): 15.9 mm    Additional: With Locking Element   
Part Number: PLST-079C-159-HKASLLK-013 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$78.68 AUD
$94.42 AUD $78.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
13.4
N
Tip Diameter (D)
4.6
mm
Tip Length (C)
4.8
mm
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.1 mm    Head Diameter (F): 15.9 mm   
Part Number: PLST-079C-159-HKASL-013 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$79.86 AUD
$79.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
13.4
N
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 4.6 mm    Tip Length (C): 4.8 mm    Head Height (E): 7.1 mm    Head Diameter (F): 15.9 mm   
Part Number: PLST-079C-159-HKASL-013 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$79.86 AUD
$79.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
26.7
N
Tip Diameter (D)
4.6
mm
Tip Length (C)
4.8
mm
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.1 mm    Head Diameter (F): 15.9 mm    Additional: With Locking Element   
Part Number: PLST-079C-159-HKASLLK-027 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$80.32 AUD
$80.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
26.7
N
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 4.6 mm    Tip Length (C): 4.8 mm    Head Height (E): 7.1 mm    Head Diameter (F): 15.9 mm    Additional: With Locking Element   
Part Number: PLST-079C-159-HKASLLK-027 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$80.32 AUD
$80.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
26.7
N
Tip Diameter (D)
4.6
mm
Tip Length (C)
4.8
mm
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.1 mm    Head Diameter (F): 15.9 mm   
Part Number: PLST-079C-159-HKASL-027 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$76.23 AUD
$76.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
26.7
N
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 4.6 mm    Tip Length (C): 4.8 mm    Head Height (E): 7.1 mm    Head Diameter (F): 15.9 mm   
Part Number: PLST-079C-159-HKASL-027 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$76.23 AUD
$76.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M8 (8x1.25mm)

Thread Length (B)
15.8
mm

(Equiv. 0.622 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
13.0
N
Tip Diameter (D)
4.5
mm
Tip Length (C)
4.8
mm
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.0 mm    Head Diameter (F): 15.8 mm    Additional: With Locking Element   
Part Number: PLST-080-158-HKASLLK-013 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$81.68 AUD
$81.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M8 (8x1.25mm)

Thread Length (B)
15.8
mm

(Equiv. 0.622 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
13.0
N
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 4.5 mm    Tip Length (C): 4.8 mm    Head Height (E): 7.0 mm    Head Diameter (F): 15.8 mm    Additional: With Locking Element   
Part Number: PLST-080-158-HKASLLK-013 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$81.68 AUD
$81.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M8 (8x1.25mm)

Thread Length (B)
15.8
mm

(Equiv. 0.622 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
13.0
N
Tip Diameter (D)
4.5
mm
Tip Length (C)
4.8
mm
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.0 mm    Head Diameter (F): 15.8 mm   
Part Number: PLST-080-158-HKASL-013 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$74.77 AUD
$74.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M8 (8x1.25mm)

Thread Length (B)
15.8
mm

(Equiv. 0.622 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
13.0
N
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 4.5 mm    Tip Length (C): 4.8 mm    Head Height (E): 7.0 mm    Head Diameter (F): 15.8 mm   
Part Number: PLST-080-158-HKASL-013 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$74.77 AUD
$74.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M8 (8x1.25mm)

Thread Length (B)
15.8
mm

(Equiv. 0.622 in.)
Initial Pressure (F1)
6.5
N
Final Pressure (F2)
26.5
N
Tip Diameter (D)
4.5
mm
Tip Length (C)
4.8
mm
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.0 mm    Head Diameter (F): 15.8 mm   
Part Number: PLST-080-158-HKASL-027 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$74.68 AUD
$74.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M8 (8x1.25mm)

Thread Length (B)
15.8
mm

(Equiv. 0.622 in.)
Initial Pressure (F1)
6.5
N
Final Pressure (F2)
26.5
N
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 4.5 mm    Tip Length (C): 4.8 mm    Head Height (E): 7.0 mm    Head Diameter (F): 15.8 mm   
Part Number: PLST-080-158-HKASL-027 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$74.68 AUD
$74.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M8 (8x1.25mm)

Thread Length (B)
15.8
mm

(Equiv. 0.622 in.)
Initial Pressure (F1)
6.5
N
Final Pressure (F2)
26.5
N
Tip Diameter (D)
4.5
mm
Tip Length (C)
4.8
mm
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.0 mm    Head Diameter (F): 15.8 mm    Additional: With Locking Element   
Part Number: PLST-080-158-HKASLLK-027 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$81.59 AUD
$81.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M8 (8x1.25mm)

Thread Length (B)
15.8
mm

(Equiv. 0.622 in.)
Initial Pressure (F1)
6.5
N
Final Pressure (F2)
26.5
N
Spring Plungers - M8 - 8x1.25mm - 15.8 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 4.5 mm    Tip Length (C): 4.8 mm    Head Height (E): 7.0 mm    Head Diameter (F): 15.8 mm    Additional: With Locking Element   
Part Number: PLST-080-158-HKASLLK-027 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$81.59 AUD
$81.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
17.8
N
Tip Diameter (D)
5.5
mm
Tip Length (C)
5.6
mm
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.9 mm    Head Diameter (F): 19.1 mm    Additional: With Locking Element   
Part Number: PLST-095C-191-HKASLLK-018 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$92.14 AUD
$92.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
17.8
N
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 5.5 mm    Tip Length (C): 5.6 mm    Head Height (E): 7.9 mm    Head Diameter (F): 19.1 mm    Additional: With Locking Element   
Part Number: PLST-095C-191-HKASLLK-018 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$92.14 AUD
$92.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
17.8
N
Tip Diameter (D)
5.5
mm
Tip Length (C)
5.6
mm
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.9 mm    Head Diameter (F): 19.1 mm   
Part Number: PLST-095C-191-HKASL-018 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$89.59 AUD
$89.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
17.8
N
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 3.3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 5.5 mm    Tip Length (C): 5.6 mm    Head Height (E): 7.9 mm    Head Diameter (F): 19.1 mm   
Part Number: PLST-095C-191-HKASL-018 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$89.59 AUD
$89.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
35.6
N
Tip Diameter (D)
5.5
mm
Tip Length (C)
5.6
mm
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.9 mm    Head Diameter (F): 19.1 mm   
Part Number: PLST-095C-191-HKASL-036 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$89.50 AUD
$89.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
35.6
N
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 5.5 mm    Tip Length (C): 5.6 mm    Head Height (E): 7.9 mm    Head Diameter (F): 19.1 mm   
Part Number: PLST-095C-191-HKASL-036 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$89.50 AUD
$89.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
35.6
N
Tip Diameter (D)
5.5
mm
Tip Length (C)
5.6
mm
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.9 mm    Head Diameter (F): 19.1 mm    Additional: With Locking Element   
Part Number: PLST-095C-191-HKASLLK-036 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$80.05 AUD
$80.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
6.7
N
Final Pressure (F2)
35.6
N
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 6.7 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 5.5 mm    Tip Length (C): 5.6 mm    Head Height (E): 7.9 mm    Head Diameter (F): 19.1 mm    Additional: With Locking Element   
Part Number: PLST-095C-191-HKASLLK-036 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$80.05 AUD
$80.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M10 - 10x1.5mm - 19 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
18.0
N
Tip Diameter (D)
5.5
mm
Tip Length (C)
5.5
mm
Spring Plungers - M10 - 10x1.5mm - 19 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.9 mm    Head Diameter (F): 19.0 mm    Additional: With Locking Element   
Part Number: PLST-100-190-HKASLLK-018 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$106.05 AUD
$106.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M10 - 10x1.5mm - 19 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
18.0
N
Spring Plungers - M10 - 10x1.5mm - 19 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 5.5 mm    Tip Length (C): 5.5 mm    Head Height (E): 7.9 mm    Head Diameter (F): 19.0 mm    Additional: With Locking Element   
Part Number: PLST-100-190-HKASLLK-018 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$106.05 AUD
$106.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M10 - 10x1.5mm - 19 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
18.0
N
Tip Diameter (D)
5.5
mm
Tip Length (C)
5.5
mm
Spring Plungers - M10 - 10x1.5mm - 19 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.9 mm    Head Diameter (F): 19.0 mm   
Part Number: PLST-100-190-HKASL-018 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$93.14 AUD
$93.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M10 - 10x1.5mm - 19 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
3.0
N
Final Pressure (F2)
18.0
N
Spring Plungers - M10 - 10x1.5mm - 19 mm - 3 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 5.5 mm    Tip Length (C): 5.5 mm    Head Height (E): 7.9 mm    Head Diameter (F): 19.0 mm   
Part Number: PLST-100-190-HKASL-018 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$93.14 AUD
$93.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M10 - 10x1.5mm - 19 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
6.5
N
Final Pressure (F2)
35.5
N
Tip Diameter (D)
5.5
mm
Tip Length (C)
5.5
mm
Spring Plungers - M10 - 10x1.5mm - 19 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.9 mm    Head Diameter (F): 19.0 mm    Additional: With Locking Element   
Part Number: PLST-100-190-HKASLLK-036 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$105.77 AUD
$105.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M10 - 10x1.5mm - 19 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
6.5
N
Final Pressure (F2)
35.5
N
Spring Plungers - M10 - 10x1.5mm - 19 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 5.5 mm    Tip Length (C): 5.5 mm    Head Height (E): 7.9 mm    Head Diameter (F): 19.0 mm    Additional: With Locking Element   
Part Number: PLST-100-190-HKASLLK-036 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$105.77 AUD
$105.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M10 - 10x1.5mm - 19 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
6.5
N
Final Pressure (F2)
35.5
N
Tip Diameter (D)
5.5
mm
Tip Length (C)
5.5
mm
Spring Plungers - M10 - 10x1.5mm - 19 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Head Height (E): 7.9 mm    Head Diameter (F): 19.0 mm   
Part Number: PLST-100-190-HKASL-036 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$92.95 AUD
$92.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spring Plungers - M10 - 10x1.5mm - 19 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal Plunger
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
6.5
N
Final Pressure (F2)
35.5
N
Spring Plungers - M10 - 10x1.5mm - 19 mm - 6.5 N Knurled Handle - Stainless Steel Body with Acetal
Material: Stainless Steel Body with Acetal    Tip Diameter (D): 5.5 mm    Tip Length (C): 5.5 mm    Head Height (E): 7.9 mm    Head Diameter (F): 19.0 mm   
Part Number: PLST-100-190-HKASL-036 (Each)
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 20, 2026
$92.95 AUD
$92.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.