Gears - Spur - Standard - 72DP - Stainless

2 Products in this selection
  • PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 72 Diametrical Pitch. Approx 1.11mm between teeth.
Additional resources:
72DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
100
Nr. 		35.28
mm 		6.350
mm 		35.979
mm 		4.75
mm 		72DP
 1187373 | G035B-100-D72-048-064-S3-G --- Gears - 100 Teeth x 35.28 mm x 6.35 mm
Material: 303 Stainless Steel    Hub Diameter (D1): 12.70 mm    Hub Projection (HL): 6.35 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G035B-100-D72-048-064-S3-G Gears - 100 Teeth x 35.28 mm x 6.35 mm
4 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
100
Nr. 		35.28
mm 		6.350
mm 		35.979
mm 		1187373 | G035B-100-D72-048-064-S3-G --- Gears - 100 Teeth x 35.28 mm x 6.35 mm
Material: 303 Stainless Steel    Face Width (FW): 4.75 mm    Pitch: 72DP    Hub Diameter (D1): 12.70 mm    Hub Projection (HL): 6.35 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G035B-100-D72-048-064-S3-G Gears - 100 Teeth x 35.28 mm x 6.35 mm
4 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
126
Nr. 		44.45
mm 		6.350
mm 		45.151
mm 		4.75
mm 		72DP
 1195333 | G044B-126-D72-048-064-S3-G --- Gears - 126 Teeth x 44.45 mm x 6.35 mm
Material: 303 Stainless Steel    Hub Diameter (D1): 12.70 mm    Hub Projection (HL): 6.35 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G044B-126-D72-048-064-S3-G Gears - 126 Teeth x 44.45 mm x 6.35 mm
4 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$14.00 AUD
$23.10 AUD $14.00 AUD
Each
126
Nr. 		44.45
mm 		6.350
mm 		45.151
mm 		1195333 | G044B-126-D72-048-064-S3-G --- Gears - 126 Teeth x 44.45 mm x 6.35 mm
Material: 303 Stainless Steel    Face Width (FW): 4.75 mm    Pitch: 72DP    Hub Diameter (D1): 12.70 mm    Hub Projection (HL): 6.35 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G044B-126-D72-048-064-S3-G Gears - 126 Teeth x 44.45 mm x 6.35 mm
4 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$14.00 AUD
$23.10 AUD $14.00 AUD
Each