Gears - Spur - Standard - 72DP - Aluminium

2 Products in this selection
  • PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 72 Diametrical Pitch. Approx 1.11mm between teeth.
Additional resources:
72DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
100
Nr. 		35.28
mm 		4.762
mm 		35.979
mm 		4.75
mm 		72DP
 1187347 | G035B-100-D72-048-048-AL-G --- Gears - 100 Teeth x 35.28 mm x 4.762 mm
Material: 2024 Aluminum Alloy    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.55 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G035B-100-D72-048-048-AL-G Gears - 100 Teeth x 35.28 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$33.00 AUD $20.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
100
Nr. 		35.28
mm 		4.762
mm 		35.979
mm 		1187347 | G035B-100-D72-048-048-AL-G --- Gears - 100 Teeth x 35.28 mm x 4.762 mm
Material: 2024 Aluminum Alloy    Face Width (FW): 4.75 mm    Pitch: 72DP    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.55 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G035B-100-D72-048-048-AL-G Gears - 100 Teeth x 35.28 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$20.00 AUD
$33.00 AUD $20.00 AUD
Each
120
Nr. 		42.33
mm 		4.762
mm 		43.035
mm 		4.75
mm 		72DP
 1193393 | G042B-120-D72-048-048-AL-G --- Gears - 120 Teeth x 42.33 mm x 4.762 mm
Material: 2024 Aluminum Alloy    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.55 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G042B-120-D72-048-048-AL-G Gears - 120 Teeth x 42.33 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$40.00 AUD
$66.00 AUD $40.00 AUD
Each
120
Nr. 		42.33
mm 		4.762
mm 		43.035
mm 		1193393 | G042B-120-D72-048-048-AL-G --- Gears - 120 Teeth x 42.33 mm x 4.762 mm
Material: 2024 Aluminum Alloy    Face Width (FW): 4.75 mm    Pitch: 72DP    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.55 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: AGMA Q10   
Part Number: G042B-120-D72-048-048-AL-G Gears - 120 Teeth x 42.33 mm x 4.762 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$40.00 AUD
$66.00 AUD $40.00 AUD
Each