Gears - Spur - Standard - 48DP - 20 Degree - Aluminium

1 Item Available
  • PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 2024 and 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 48 Diametrical Pitch. Approx 1.66mm between teeth.
Additional resources:
48DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
25
 13.23
mm 		4.762
mm 		14.277
mm 		3.18
mm 		48DP
 1132822 | G013B-25-D48-032-048-AL-G --- Spur Gears - 25 x 13.23 mm x 4.762 mm
Material: Aluminium Alloy 2024    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.54 mm    Locking Method: Set Screw    Pressure Angle: 20 °    Quality: AGMA Q10   
Part Number: G013B-25-D48-032-048-AL-G Spur Gears - 25 x 13.23 mm x 4.762 mm
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
25
 13.23
mm 		4.762
mm 		14.277
mm 		1132822 | G013B-25-D48-032-048-AL-G --- Spur Gears - 25 x 13.23 mm x 4.762 mm
Material: Aluminium Alloy 2024    Face Width (FW): 3.18 mm    Pitch: 48DP    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.54 mm    Locking Method: Set Screw    Pressure Angle: 20 °    Quality: AGMA Q10   
Part Number: G013B-25-D48-032-048-AL-G Spur Gears - 25 x 13.23 mm x 4.762 mm
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each