Gears - Spur - Standard - 32DP - 14.5 Degree - Brass

2 Products in this selection
  • PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 32 Diametrical Pitch. Approx 2.49mm between teeth.
Additional resources:
32DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
6
Nr. 		4.78
mm 		1.588
mm 		6.375
mm 		4.76
mm 		32DP
 1066598 | G005B-06-V32-048-016-B-N --- Gears - 6 Teeth x 4.78 mm x 1.588 mm
Material: Brass    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial   
Part Number: G005B-06-V32-048-016-B-N Gears - 6 Teeth x 4.78 mm x 1.588 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.00 AUD
$9.90 AUD $6.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
6
Nr. 		4.78
mm 		1.588
mm 		6.375
mm 		1066598 | G005B-06-V32-048-016-B-N --- Gears - 6 Teeth x 4.78 mm x 1.588 mm
Material: Brass    Face Width (FW): 4.76 mm    Pitch: 32DP    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial   
Part Number: G005B-06-V32-048-016-B-N Gears - 6 Teeth x 4.78 mm x 1.588 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.00 AUD
$9.90 AUD $6.00 AUD
Each
11
Nr. 		8.74
mm 		3.175
mm 		10.338
mm 		4.76
mm 		32DP
 1095753 | G009B-11-V32-048-032-B-N --- Gears - 11 Teeth x 8.74 mm x 3.175 mm
Material: Brass    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial   
Part Number: G009B-11-V32-048-032-B-N Gears - 11 Teeth x 8.74 mm x 3.175 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
11
Nr. 		8.74
mm 		3.175
mm 		10.338
mm 		1095753 | G009B-11-V32-048-032-B-N --- Gears - 11 Teeth x 8.74 mm x 3.175 mm
Material: Brass    Face Width (FW): 4.76 mm    Pitch: 32DP    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 14.5 Deg.    Quality: Commercial   
Part Number: G009B-11-V32-048-032-B-N Gears - 11 Teeth x 8.74 mm x 3.175 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$8.25 AUD $5.00 AUD
Each