Gears - Spur - Standard - 24DP - 14.5 Degree - Steel

Gears -> Spur -> Standard -> 24DP -> 14.5 Degree -> Steel

There are 5 products in the sub-categories of Gears - Spur - Standard - 24DP - 14.5 Degree - Steel. Browse the Gears - Spur - Standard - 24DP - 14.5 Degree - Steel products table.

Category Details

A selection of Steel 14.5 Degree 24DP Standard Spur Gears. PCD in mm = No. of Teeth x 1.05833 (1/24 in.). 14.5 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

  • The diameter increases by 1 inch for every 24 teeth
  • 24 Diametrical Pitch. Approx 3.33mm between the teeth.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Spur - Standard - 24DP - 14.5 Degree - Steel category on the Small Parts & Bearings online store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Spur Gears - 12 tooth - 12.7x6.35 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
12
Pitch Circle Diameter (PD)
12.700
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
14.808
mm
Face Width (FW)
6.350
mm
Type
Hubbed
Spur Gears - 12 tooth - 12.7x6.35 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 9.144 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G013B-012-V24-064-064-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$93.23 AUD
$93.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Spur Gears - 12 tooth - 12.7x6.35 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
12
Pitch Circle Diameter (PD)
12.700
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
14.808
mm
Spur Gears - 12 tooth - 12.7x6.35 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 6.350 mm    Type: Hubbed    Hub Diameter (D1): 9.144 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G013B-012-V24-064-064-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$93.23 AUD
$93.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 16 tooth - 16.942x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
16
Pitch Circle Diameter (PD)
16.942
mm
Bore (d)
7.938
mm
Outside Diameter (OD)
19.050
mm
Face Width (FW)
6.350
mm
Type
Hubbed
Spur Gears - 16 tooth - 16.942x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 13.716 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G017B-016-V24-064-079-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$115.59 AUD
$138.71 AUD $115.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 16 tooth - 16.942x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
16
Pitch Circle Diameter (PD)
16.942
mm
Bore (d)
7.938
mm
Outside Diameter (OD)
19.050
mm
Spur Gears - 16 tooth - 16.942x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 6.350 mm    Type: Hubbed    Hub Diameter (D1): 13.716 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G017B-016-V24-064-079-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$115.59 AUD
$138.71 AUD $115.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 20 tooth - 21.158x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
20
Pitch Circle Diameter (PD)
21.158
mm
Bore (d)
7.938
mm
Outside Diameter (OD)
23.266
mm
Face Width (FW)
6.350
mm
Type
Hubbed
Spur Gears - 20 tooth - 21.158x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 17.780 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G021B-020-V24-064-079-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$113.77 AUD
$136.53 AUD $113.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 20 tooth - 21.158x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
20
Pitch Circle Diameter (PD)
21.158
mm
Bore (d)
7.938
mm
Outside Diameter (OD)
23.266
mm
Spur Gears - 20 tooth - 21.158x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 6.350 mm    Type: Hubbed    Hub Diameter (D1): 17.780 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G021B-020-V24-064-079-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$113.77 AUD
$136.53 AUD $113.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 20 tooth - 21.16x6.35 mm Hubless - Carbon Steel Gear
Number of Teeth
20
Pitch Circle Diameter (PD)
21.16
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
23.266
mm
Face Width (FW)
6.35
mm
Type
Hubless
Spur Gears - 20 tooth - 21.16x6.35 mm Hubless - Carbon Steel Gear
Material: Carbon Steel    Quality: Commercial   
Deleted Item. Available while stocks last.
Part Number: G021P-020-V24-064-064-C (Each)
2 Available Now | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$22.00 AUD
$41.80 AUD $22.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Spur Gears - 20 tooth - 21.16x6.35 mm Hubless - Carbon Steel Gear
Number of Teeth
20
Pitch Circle Diameter (PD)
21.16
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
23.266
mm
Spur Gears - 20 tooth - 21.16x6.35 mm Hubless - Carbon Steel Gear
Material: Carbon Steel    Face Width (FW): 6.35 mm    Type: Hubless    Quality: Commercial   
Deleted Item. Available while stocks last.
Part Number: G021P-020-V24-064-064-C (Each)
2 Available Now | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$22.00 AUD
$41.80 AUD $22.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Spur Gears - 24 tooth - 25.4x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
24
Pitch Circle Diameter (PD)
25.400
mm
Bore (d)
9.525
mm
Outside Diameter (OD)
27.508
mm
Face Width (FW)
6.350
mm
Type
Hubbed
Spur Gears - 24 tooth - 25.4x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 22.098 mm    Hub Projection (HL): 9.652 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G025B-024-V24-064-095-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$132.95 AUD
$159.55 AUD $132.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 24 tooth - 25.4x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
24
Pitch Circle Diameter (PD)
25.400
mm
Bore (d)
9.525
mm
Outside Diameter (OD)
27.508
mm
Spur Gears - 24 tooth - 25.4x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 6.350 mm    Type: Hubbed    Hub Diameter (D1): 22.098 mm    Hub Projection (HL): 9.652 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G025B-024-V24-064-095-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$132.95 AUD
$159.55 AUD $132.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.