Gears - Spur - Standard - 16DP - 20 Degree Plastic

2 Products in this selection
  • PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon and acetal. DP stands for Diametrical Pitch and is an imperial measurement system.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
  • 16 Diametrical Pitch. Approx 4.99mm between teeth.
Additional resources:
16DP Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
76
Nr. 		120.65
mm 		12.700
mm 		123.825
mm 		9.53
mm 		16DP
 1178032 | G121B-76-D16-095-127-AGPD --- Gears - 76 Teeth x 120.65 mm x 12.7 mm
Material: Glass Filled Acetal    Hub Diameter (D1): 22.23 mm    Hub Projection (HL): 12.70 mm    Locking Method: Pin Hub Extended Both Sides - No Set Screw - Spoked    Pressure Angle: 20 Deg.    Quality: Commercial - Moulded   
Part Number: G121B-76-D16-095-127-AGPD Gears - 76 Teeth x 120.65 mm x 12.7 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$33.00 AUD $20.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
76
Nr. 		120.65
mm 		12.700
mm 		123.825
mm 		1178032 | G121B-76-D16-095-127-AGPD --- Gears - 76 Teeth x 120.65 mm x 12.7 mm
Material: Glass Filled Acetal    Face Width (FW): 9.53 mm    Pitch: 16DP    Hub Diameter (D1): 22.23 mm    Hub Projection (HL): 12.70 mm    Locking Method: Pin Hub Extended Both Sides - No Set Screw - Spoked    Pressure Angle: 20 Deg.    Quality: Commercial - Moulded   
Part Number: G121B-76-D16-095-127-AGPD Gears - 76 Teeth x 120.65 mm x 12.7 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$20.00 AUD
$33.00 AUD $20.00 AUD
Each
80
Nr. 		127.00
mm 		12.700
mm 		130.175
mm 		9.53
mm 		16DP
 1179865 | G127B-80-D16-095-127-AGPD --- Gears - 80 Teeth x 127 mm x 12.7 mm
Material: Glass Filled Acetal    Hub Diameter (D1): 22.23 mm    Hub Projection (HL): 12.70 mm    Locking Method: Pin Hub Extended Both Sides - No Set Screw - Spoked    Pressure Angle: 20 Deg.    Quality: Commercial - Moulded   
Part Number: G127B-80-D16-095-127-AGPD Gears - 80 Teeth x 127 mm x 12.7 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$33.00 AUD $20.00 AUD
Each
80
Nr. 		127.00
mm 		12.700
mm 		130.175
mm 		1179865 | G127B-80-D16-095-127-AGPD --- Gears - 80 Teeth x 127 mm x 12.7 mm
Material: Glass Filled Acetal    Face Width (FW): 9.53 mm    Pitch: 16DP    Hub Diameter (D1): 22.23 mm    Hub Projection (HL): 12.70 mm    Locking Method: Pin Hub Extended Both Sides - No Set Screw - Spoked    Pressure Angle: 20 Deg.    Quality: Commercial - Moulded   
Part Number: G127B-80-D16-095-127-AGPD Gears - 80 Teeth x 127 mm x 12.7 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$20.00 AUD
$33.00 AUD $20.00 AUD
Each