Washers - Self Aligning - Sets - Hardened Steel

14 Products in this selection
  • Spherical Seat Washers
  • Hardened steel 9 S Mn Pb 28 K DIN 6319.
  • Max Shaft Size Shown will allow 3o of misalignment.
  • DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.
Additional resources:
Screws
Suits Shaft or Bolt Size Bore Size (A) OD (B) Overall Height (C) Base ID (E) Indicative
Image
6.35
mm 		7.137
mm
+/- 0.38 		15.88
mm
+ /- 0.38 		4.750
mm
+/- 0.38 		Rondella autoallineante 6,35 x 7,137 x 15,88 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 6,35 x 7,137 x 15,88 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 6,35 x 7,137 x 15,88 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
5 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$10.77 AUD
$10.77 AUD
Each
Suits Shaft or Bolt Size Bore Size (A) OD (B) Overall Height (C) Indicative
Image
6.35
mm 		7.137
mm
+/- 0.38 		15.88
mm
+ /- 0.38 		4.750
mm
+/- 0.38 		Rondella autoallineante 6,35 x 7,137 x 15,88 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 6,35 x 7,137 x 15,88 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 6,35 x 7,137 x 15,88 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
5 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$10.77 AUD
$10.77 AUD
Each
View the product page first if you are unsure.
7.94
mm 		8.712
mm
+/- 0.38 		19.05
mm
+ /- 0.38 		6.350
mm
+/- 0.38 		1079737 | W0079-ALN-C-SET --- Self Aligning Washers - 7.94 mm x 8.712 mm x 19.05 mm
Material: Carbon Steel Hardened   
Part Number: W0079-ALN-C-SET Self Aligning Washers - 7.94 mm x 8.712 mm x 19.05 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$9.59 AUD
$9.59 AUD
Each
7.94
mm 		8.712
mm
+/- 0.38 		19.05
mm
+ /- 0.38 		6.350
mm
+/- 0.38 		1079737 | W0079-ALN-C-SET --- Self Aligning Washers - 7.94 mm x 8.712 mm x 19.05 mm
Material: Carbon Steel Hardened   
Part Number: W0079-ALN-C-SET Self Aligning Washers - 7.94 mm x 8.712 mm x 19.05 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$9.59 AUD
$9.59 AUD
Each
View the product page first if you are unsure.
9.53
mm 		10.319
mm
+/- 0.38 		22.23
mm
+ /- 0.38 		6.350
mm
+/- 0.38 		1089729 | W0095-ALN-C-SET --- Self Aligning Washers - 9.53 mm x 10.319 mm x 22.23 mm
Material: Carbon Steel Hardened   
Part Number: W0095-ALN-C-SET Self Aligning Washers - 9.53 mm x 10.319 mm x 22.23 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$13.59 AUD
$13.59 AUD
Each
9.53
mm 		10.319
mm
+/- 0.38 		22.23
mm
+ /- 0.38 		6.350
mm
+/- 0.38 		1089729 | W0095-ALN-C-SET --- Self Aligning Washers - 9.53 mm x 10.319 mm x 22.23 mm
Material: Carbon Steel Hardened   
Part Number: W0095-ALN-C-SET Self Aligning Washers - 9.53 mm x 10.319 mm x 22.23 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$13.59 AUD
$13.59 AUD
Each
View the product page first if you are unsure.
12.70
mm 		13.494
mm
+/- 0.38 		28.58
mm
+ /- 0.38 		7.925
mm
+/- 0.38 		1102609 | W0127-ALN-C-SET --- Self Aligning Washers - 12.7 mm x 13.494 mm x 28.58 mm
Material: Carbon Steel Hardened   
Part Number: W0127-ALN-C-SET Self Aligning Washers - 12.7 mm x 13.494 mm x 28.58 mm
3 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$21.23 AUD
$21.23 AUD
Each
12.70
mm 		13.494
mm
+/- 0.38 		28.58
mm
+ /- 0.38 		7.925
mm
+/- 0.38 		1102609 | W0127-ALN-C-SET --- Self Aligning Washers - 12.7 mm x 13.494 mm x 28.58 mm
Material: Carbon Steel Hardened   
Part Number: W0127-ALN-C-SET Self Aligning Washers - 12.7 mm x 13.494 mm x 28.58 mm
3 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$21.23 AUD
$21.23 AUD
Each
View the product page first if you are unsure.
15.88
mm 		16.662
mm
+/- 0.38 		34.93
mm
+ /- 0.38 		7.925
mm
+/- 0.38 		1113205 | W0159-ALN-C-SET --- Self Aligning Washers - 15.88 mm x 16.662 mm x 34.93 mm
Material: Carbon Steel Hardened   
Part Number: W0159-ALN-C-SET Self Aligning Washers - 15.88 mm x 16.662 mm x 34.93 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$36.14 AUD
$36.14 AUD
Each
15.88
mm 		16.662
mm
+/- 0.38 		34.93
mm
+ /- 0.38 		7.925
mm
+/- 0.38 		1113205 | W0159-ALN-C-SET --- Self Aligning Washers - 15.88 mm x 16.662 mm x 34.93 mm
Material: Carbon Steel Hardened   
Part Number: W0159-ALN-C-SET Self Aligning Washers - 15.88 mm x 16.662 mm x 34.93 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$36.14 AUD
$36.14 AUD
Each
View the product page first if you are unsure.
19.05
mm 		19.844
mm
+/- 0.38 		41.28
mm
+ /- 0.38 		9.525
mm
+/- 0.38 		1120980 | W0191-ALN-C-SET --- Self Aligning Washers - 19.05 mm x 19.844 mm x 41.28 mm
Material: Carbon Steel Hardened   
Part Number: W0191-ALN-C-SET Self Aligning Washers - 19.05 mm x 19.844 mm x 41.28 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$25.50 AUD
$25.50 AUD
Each
19.05
mm 		19.844
mm
+/- 0.38 		41.28
mm
+ /- 0.38 		9.525
mm
+/- 0.38 		1120980 | W0191-ALN-C-SET --- Self Aligning Washers - 19.05 mm x 19.844 mm x 41.28 mm
Material: Carbon Steel Hardened   
Part Number: W0191-ALN-C-SET Self Aligning Washers - 19.05 mm x 19.844 mm x 41.28 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$25.50 AUD
$25.50 AUD
Each
View the product page first if you are unsure.
22.23
mm 		23.813
mm
+/- 0.38 		44.45
mm
+ /- 0.38 		9.525
mm
+/- 0.38 		Rondella autoallineante 22,23 x 23,813 x 44,45 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 22,23 x 23,813 x 44,45 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 22,23 x 23,813 x 44,45 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
2 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$45.68 AUD
$45.68 AUD
Each
22.23
mm 		23.813
mm
+/- 0.38 		44.45
mm
+ /- 0.38 		9.525
mm
+/- 0.38 		Rondella autoallineante 22,23 x 23,813 x 44,45 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 22,23 x 23,813 x 44,45 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 22,23 x 23,813 x 44,45 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
2 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$45.68 AUD
$45.68 AUD
Each
View the product page first if you are unsure.
25.40
mm 		26.975
mm
+/- 0.38 		50.80
mm
+ /- 0.38 		12.70
mm
+/- 0.38 		Rondella autoallineante 25,4 x 26,975 x 50,8 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 25,4 x 26,975 x 50,8 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 25,4 x 26,975 x 50,8 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
1 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$63.41 AUD
$63.41 AUD
Each
25.40
mm 		26.975
mm
+/- 0.38 		50.80
mm
+ /- 0.38 		12.70
mm
+/- 0.38 		Rondella autoallineante 25,4 x 26,975 x 50,8 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 25,4 x 26,975 x 50,8 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 25,4 x 26,975 x 50,8 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
1 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$63.41 AUD
$63.41 AUD
Each
View the product page first if you are unsure.
28.58
mm 		30.15
mm
+/- 0.38 		57.15
mm
+ /- 0.38 		12.70
mm
+/- 0.38 		Rondella autoallineante 28,58 x 30,15 x 57,15 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 28,58 x 30,15 x 57,15 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 28,58 x 30,15 x 57,15 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$51.41 AUD
$51.41 AUD
Each
28.58
mm 		30.15
mm
+/- 0.38 		57.15
mm
+ /- 0.38 		12.70
mm
+/- 0.38 		Rondella autoallineante 28,58 x 30,15 x 57,15 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 28,58 x 30,15 x 57,15 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 28,58 x 30,15 x 57,15 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$51.41 AUD
$51.41 AUD
Each
View the product page first if you are unsure.
31.75
mm 		33.325
mm
+/- 0.38 		66.68
mm
+ /- 0.38 		12.70
mm
+/- 0.38 		Rondella autoallineante 31,75 x 33,325 x 66,68 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 31,75 x 33,325 x 66,68 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 31,75 x 33,325 x 66,68 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
1 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$117.86 AUD
$117.86 AUD
Each
31.75
mm 		33.325
mm
+/- 0.38 		66.68
mm
+ /- 0.38 		12.70
mm
+/- 0.38 		Rondella autoallineante 31,75 x 33,325 x 66,68 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 31,75 x 33,325 x 66,68 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 31,75 x 33,325 x 66,68 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
1 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$117.86 AUD
$117.86 AUD
Each
View the product page first if you are unsure.
38.10
mm 		39.675
mm
+/- 0.38 		73.03
mm
+ /- 0.38 		14.275
mm
+/- 0.38 		Rondella autoallineante 38,1 x 39,675 x 73,03 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 38,1 x 39,675 x 73,03 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 38,1 x 39,675 x 73,03 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$100.77 AUD
$100.77 AUD
Each
38.10
mm 		39.675
mm
+/- 0.38 		73.03
mm
+ /- 0.38 		14.275
mm
+/- 0.38 		Rondella autoallineante 38,1 x 39,675 x 73,03 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 38,1 x 39,675 x 73,03 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 38,1 x 39,675 x 73,03 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$100.77 AUD
$100.77 AUD
Each
View the product page first if you are unsure.
41.28
mm 		42.863
mm
+/- 0.38 		82.55
mm
+ /- 0.38 		17.46
mm
+/- 0.38 		Rondella autoallineante 41,28 x 42,863 x 82,55 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 41,28 x 42,863 x 82,55 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 41,28 x 42,863 x 82,55 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$101.77 AUD
$101.77 AUD
Each
41.28
mm 		42.863
mm
+/- 0.38 		82.55
mm
+ /- 0.38 		17.46
mm
+/- 0.38 		Rondella autoallineante 41,28 x 42,863 x 82,55 mm - Set acciaio al carbonio temprato - MBA (confezione da 1)
Material: Carbon Steel Hardened   
Part Number: Rondella autoallineante 41,28 x 42,863 x 82,55 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) Rondella autoallineante 41,28 x 42,863 x 82,55 mm - Set acciaio al carbonio temprato - MBA (confezione da 1) / Washers
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$101.77 AUD
$101.77 AUD
Each
View the product page first if you are unsure.
44.45
mm 		46.038
mm
+/- 0.38 		82.55
mm
+ /- 0.38 		17.46
mm
+/- 0.38 		47.70
mm 		1157285 | W0445-ALN-C-SET --- Self Aligning Washers - 44.45 mm x 46.038 mm x 82.55 mm
Material: Carbon Steel Hardened   
Part Number: W0445-ALN-C-SET Self Aligning Washers - 44.45 mm x 46.038 mm x 82.55 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$93.95 AUD
$93.95 AUD
Each
44.45
mm 		46.038
mm
+/- 0.38 		82.55
mm
+ /- 0.38 		17.46
mm
+/- 0.38 		1157285 | W0445-ALN-C-SET --- Self Aligning Washers - 44.45 mm x 46.038 mm x 82.55 mm
Material: Carbon Steel Hardened    Base ID (E): 47.70 mm   
Part Number: W0445-ALN-C-SET Self Aligning Washers - 44.45 mm x 46.038 mm x 82.55 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$93.95 AUD
$93.95 AUD
Each
View the product page first if you are unsure.
50.80
mm 		52.375
mm
+/- 0.38 		98.43
mm
+ /- 0.38 		19.05
mm
+/- 0.38 		1163436 | W0508-ALN-C-SET --- Self Aligning Washers - 50.8 mm x 52.375 mm x 98.43 mm
Material: Carbon Steel Hardened   
Part Number: W0508-ALN-C-SET Self Aligning Washers - 50.8 mm x 52.375 mm x 98.43 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$147.50 AUD
$147.50 AUD
Each
50.80
mm 		52.375
mm
+/- 0.38 		98.43
mm
+ /- 0.38 		19.05
mm
+/- 0.38 		1163436 | W0508-ALN-C-SET --- Self Aligning Washers - 50.8 mm x 52.375 mm x 98.43 mm
Material: Carbon Steel Hardened   
Part Number: W0508-ALN-C-SET Self Aligning Washers - 50.8 mm x 52.375 mm x 98.43 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$147.50 AUD
$147.50 AUD
Each
View the product page first if you are unsure.