Collezione: Sprockets - Idler
1 Item Available
Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.
Can be used directly on shafts with a surface hardnes of RC 58 or higher.
Can be run on hardened Inner Rings.
See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Can be used directly on shafts with a surface hardnes of RC 58 or higher.
Can be run on hardened Inner Rings.
See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Suits Chain Type | PCD | Bore (B) | Overall Width (E) | Number of Teeth | Hub Size (C / D) |
Indicative Image |
---|---|---|---|---|---|---|
12.70mm (12700785) 40-1 ASA |
68.7 mm |
12.70 mm |
17 |
|||
Material: Steel Style: 2 | ||||||
Part Number: IDC-5RS Sprockets - 68.7 mm x 12.7 mm
1 Available Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity Prezzo di listino
$45.00 AUD
Prezzo di listino
Prezzo unitario
/
per
Per Each
|
||||||
Suits Chain Type | PCD | Bore (B) | Overall Width (E) |
Indicative Image |
||
12.70mm (12700785) 40-1 ASA |
68.7 mm |
12.70 mm |
||||
Material: Steel Number of Teeth: 17 Style: 2 | ||||||
Part Number: IDC-5RS Sprockets - 68.7 mm x 12.7 mm
1 Available Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity | Prezzo di listino
$45.00 AUD
Prezzo di listino
Prezzo unitario
/
per
Per Each
|
||||||
|
SUBSCRIBE TO OUR EMAILS
Be the first to know about new collections and exclusive offers.