Shafting - Pre Drilled and Tapped

8 Products in this selection

This is a combined category of products from Pre Drilled and Tapped Shafting. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Drill Rod
Diameter (D) Length (L) Material Thread Size Hole Pitch (P) Surface Finish Indicative
Image
12.700
mm
-0.010/-0.030 		609.6
mm 		440C Case Hardened Stainless
 101.6
 0.30 um
Microns 		1105234 | 0R-0127-0610-DT-S440-T30 --- Shafting - 12.7 mm x 609.6 mm
Material: 440C Case Hardened Stainless    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30 Shafting - 12.7 mm x 609.6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$339.14 AUD
$339.14 AUD
Each
Diameter (D) Length (L) Material Thread Size Indicative
Image
12.700
mm
-0.010/-0.030 		609.6
mm 		440C Case Hardened Stainless
 1105234 | 0R-0127-0610-DT-S440-T30 --- Shafting - 12.7 mm x 609.6 mm
Material: 440C Case Hardened Stainless    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30 Shafting - 12.7 mm x 609.6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$339.14 AUD
$339.14 AUD
Each
15.875
mm
-0.010/-0.030 		101.6
mm 		440C Case Hardened Stainless
 101.6
 0.30 um
Microns 		1112672 | 0R-0159-1829-DT-S440-T30 --- Shafting - 15.875 mm x 101.6 mm
Material: 440C Case Hardened Stainless    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30 Shafting - 15.875 mm x 101.6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$1,893.32 AUD
$1,893.32 AUD
Each
15.875
mm
-0.010/-0.030 		101.6
mm 		440C Case Hardened Stainless
 1112672 | 0R-0159-1829-DT-S440-T30 --- Shafting - 15.875 mm x 101.6 mm
Material: 440C Case Hardened Stainless    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30 Shafting - 15.875 mm x 101.6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$1,893.32 AUD
$1,893.32 AUD
Each
15.875
mm
-0.010/-0.030 		609.6
mm 		440C Case Hardened Stainless
 101.6
 0.30 um
Microns 		1112838 | 0R-0159-0610-DT-S440-T30 --- Shafting - 15.875 mm x 609.6 mm
Material: 440C Case Hardened Stainless    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30 Shafting - 15.875 mm x 609.6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$378.59 AUD
$378.59 AUD
Each
15.875
mm
-0.010/-0.030 		609.6
mm 		440C Case Hardened Stainless
 1112838 | 0R-0159-0610-DT-S440-T30 --- Shafting - 15.875 mm x 609.6 mm
Material: 440C Case Hardened Stainless    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30 Shafting - 15.875 mm x 609.6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$378.59 AUD
$378.59 AUD
Each
19.050
mm
-0.010/-0.030 		152.4
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1122391 | 0R-0191-1829-DT-S440-T30 --- Shafting - 19.05 mm x 152.4 mm
Material: 440C Case Hardened Stainless    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30 Shafting - 19.05 mm x 152.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$1,969.32 AUD
$1,969.32 AUD
Each
19.050
mm
-0.010/-0.030 		152.4
mm 		440C Case Hardened Stainless
 1122391 | 0R-0191-1829-DT-S440-T30 --- Shafting - 19.05 mm x 152.4 mm
Material: 440C Case Hardened Stainless    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30 Shafting - 19.05 mm x 152.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$1,969.32 AUD
$1,969.32 AUD
Each
19.050
mm
-0.010/-0.030 		610
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1122535 | 0R-0191-0610-DT-S440-T30 --- Shafting - 19.05 mm x 610 mm
Material: 440C Case Hardened Stainless Steel Steel    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30 Shafting - 19.05 mm x 610 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$659.77 AUD
$659.77 AUD
Each
19.050
mm
-0.010/-0.030 		610
mm 		440C Case Hardened Stainless
 1122535 | 0R-0191-0610-DT-S440-T30 --- Shafting - 19.05 mm x 610 mm
Material: 440C Case Hardened Stainless Steel Steel    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30 Shafting - 19.05 mm x 610 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$659.77 AUD
$659.77 AUD
Each
25.400
mm
-0.010/-0.030 		152.4
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1136560 | 0R-0254-1829-DT-S440-T30 --- Shafting - 25.4 mm x 152.4 mm
Material: 440C Case Hardened Stainless    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30 Shafting - 25.4 mm x 152.4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$2,459.14 AUD
$2,459.14 AUD
Each
25.400
mm
-0.010/-0.030 		152.4
mm 		440C Case Hardened Stainless
 1136560 | 0R-0254-1829-DT-S440-T30 --- Shafting - 25.4 mm x 152.4 mm
Material: 440C Case Hardened Stainless    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30 Shafting - 25.4 mm x 152.4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$2,459.14 AUD
$2,459.14 AUD
Each
25.400
mm
-0.010/-0.030 		610
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1136665 | 0R-0254-0610-DT-S440-T30 --- Shafting - 25.4 mm x 610 mm
Material: 440C Case Hardened Stainless Steel Steel    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30 Shafting - 25.4 mm x 610 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$847.86 AUD
$847.86 AUD
Each
25.400
mm
-0.010/-0.030 		610
mm 		440C Case Hardened Stainless
 1136665 | 0R-0254-0610-DT-S440-T30 --- Shafting - 25.4 mm x 610 mm
Material: 440C Case Hardened Stainless Steel Steel    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30 Shafting - 25.4 mm x 610 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$847.86 AUD
$847.86 AUD
Each
25.400
mm
-0.010/-0.030 		1219.2
mm 		440C Case Hardened Stainless
 152.4
 0.30 um
Microns 		1136699 | 0R-0254-1219-DT-S440-T30 --- Shafting - 25.4 mm x 1219.2 mm
Material: 440C Case Hardened Stainless Steel Steel    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30 Shafting - 25.4 mm x 1219.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$1,668.77 AUD
$1,668.77 AUD
Each
25.400
mm
-0.010/-0.030 		1219.2
mm 		440C Case Hardened Stainless
 1136699 | 0R-0254-1219-DT-S440-T30 --- Shafting - 25.4 mm x 1219.2 mm
Material: 440C Case Hardened Stainless Steel Steel    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30 Shafting - 25.4 mm x 1219.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$1,668.77 AUD
$1,668.77 AUD
Each