Screws - Thumb - Wing

13 Products in this selection
This is a combined category of Wing Thumb Screws.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Thumb Screws and Nuts PDF Quick Guide
PDF Screws Catalogue
Nuts
Thread Size (C) Thread Length (Tl) Overall Length (L) Head Diameter (A) Head Height (H) Indicative
Image
1/4-20 UNC (6.35mm)
12.70
mm 		33.34
mm 		31.75
mm 		20.64
mm 		Vite a testa zigrinata 1/4-20 UNC x 12,70 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 12,70 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 12,70 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$8.86 AUD
$8.86 AUD
Each
Thread Size (C) Thread Length (Tl) Overall Length (L) Indicative
Image
1/4-20 UNC (6.35mm)
12.70
mm 		33.34
mm 		Vite a testa zigrinata 1/4-20 UNC x 12,70 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 12,70 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 12,70 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$8.86 AUD
$8.86 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
19.05
mm 		39.69
mm 		31.75
mm 		20.64
mm 		Vite a testa zigrinata 1/4-20 UNC x 19,05 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 19,05 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 19,05 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$13.14 AUD
$13.14 AUD
Each
1/4-20 UNC (6.35mm)
19.05
mm 		39.69
mm 		Vite a testa zigrinata 1/4-20 UNC x 19,05 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 19,05 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 19,05 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$13.14 AUD
$13.14 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
25.40
mm 		46.04
mm 		31.75
mm 		20.64
mm 		Vite a testa zigrinata 1/4-20 UNC x 25,4 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 25,4 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 25,4 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$9.23 AUD
$9.23 AUD
Each
1/4-20 UNC (6.35mm)
25.40
mm 		46.04
mm 		Vite a testa zigrinata 1/4-20 UNC x 25,4 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 25,4 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 25,4 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$9.23 AUD
$9.23 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
38.10
mm 		58.74
mm 		31.75
mm 		20.64
mm 		Vite a testa zigrinata 1/4-20 UNC x 38,1 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 38,1 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 38,1 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$13.41 AUD
$13.41 AUD
Each
1/4-20 UNC (6.35mm)
38.10
mm 		58.74
mm 		Vite a testa zigrinata 1/4-20 UNC x 38,1 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 38,1 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 38,1 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$13.41 AUD
$13.41 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
50.80
mm 		71.44
mm 		31.75
mm 		20.64
mm 		Vite a testa zigrinata 1/4-20 UNC x 50,80 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 50,80 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 50,80 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$14.41 AUD
$14.41 AUD
Each
1/4-20 UNC (6.35mm)
50.80
mm 		71.44
mm 		Vite a testa zigrinata 1/4-20 UNC x 50,80 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1)
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: Vite a testa zigrinata 1/4-20 UNC x 50,80 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) Vite a testa zigrinata 1/4-20 UNC x 50,80 mm Ferro malleabile - Rondella ad ala - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$14.41 AUD
$14.41 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
19.05
mm 		38.10
mm 		44.45
mm 		19.05
mm 		Vite a testa zigrinata 5/16-18 UNC x 19,05 mm Acciaio - Aletta - MBA (confezione da 1)
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vite a testa zigrinata 5/16-18 UNC x 19,05 mm Acciaio - Aletta - MBA (confezione da 1) Vite a testa zigrinata 5/16-18 UNC x 19,05 mm Acciaio - Aletta - MBA (confezione da 1) / Screws
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
$14.23 AUD
$14.23 AUD
Each
5/16-18 UNC (7.94mm)
19.05
mm 		38.10
mm 		Vite a testa zigrinata 5/16-18 UNC x 19,05 mm Acciaio - Aletta - MBA (confezione da 1)
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vite a testa zigrinata 5/16-18 UNC x 19,05 mm Acciaio - Aletta - MBA (confezione da 1) Vite a testa zigrinata 5/16-18 UNC x 19,05 mm Acciaio - Aletta - MBA (confezione da 1) / Screws
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
$14.23 AUD
$14.23 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
25.40
mm 		44.45
mm 		44.45
mm 		19.05
mm 		Vite a testa zigrinata 5/16-18 UNC x 25,4 mm Acciaio - Aletta - MBA (confezione da 1)
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vite a testa zigrinata 5/16-18 UNC x 25,4 mm Acciaio - Aletta - MBA (confezione da 1) Vite a testa zigrinata 5/16-18 UNC x 25,4 mm Acciaio - Aletta - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$15.05 AUD
$15.05 AUD
Each
5/16-18 UNC (7.94mm)
25.40
mm 		44.45
mm 		Vite a testa zigrinata 5/16-18 UNC x 25,4 mm Acciaio - Aletta - MBA (confezione da 1)
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vite a testa zigrinata 5/16-18 UNC x 25,4 mm Acciaio - Aletta - MBA (confezione da 1) Vite a testa zigrinata 5/16-18 UNC x 25,4 mm Acciaio - Aletta - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$15.05 AUD
$15.05 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
38.10
mm 		57.15
mm 		44.45
mm 		19.05
mm 		1079127 | THS079C-038-W-CS --- Thumb Screws - 5/16-18 UNC (7.94mm) x 38.1 mm x 57.15 mm
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-038-W-CS Thumb Screws - 5/16-18 UNC (7.94mm) x 38.1 mm x 57.15 mm
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
$15.32 AUD
$15.32 AUD
Each
5/16-18 UNC (7.94mm)
38.10
mm 		57.15
mm 		1079127 | THS079C-038-W-CS --- Thumb Screws - 5/16-18 UNC (7.94mm) x 38.1 mm x 57.15 mm
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-038-W-CS Thumb Screws - 5/16-18 UNC (7.94mm) x 38.1 mm x 57.15 mm
2 Available Immediately | Further orders can be expected around Sat, Apr 05, 2025
$15.32 AUD
$15.32 AUD
Each
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
19.05
mm 		41.28
mm 		46.04
mm 		22.23
mm 		1087893 | THS095C-019-W-CS --- Thumb Screws - 3/8-16 UNC (9.53mm) x 19.05 mm x 41.28 mm
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-019-W-CS Thumb Screws - 3/8-16 UNC (9.53mm) x 19.05 mm x 41.28 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$17.41 AUD
$17.41 AUD
Each
3/8-16 UNC (9.53mm)
19.05
mm 		41.28
mm 		1087893 | THS095C-019-W-CS --- Thumb Screws - 3/8-16 UNC (9.53mm) x 19.05 mm x 41.28 mm
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-019-W-CS Thumb Screws - 3/8-16 UNC (9.53mm) x 19.05 mm x 41.28 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$17.41 AUD
$17.41 AUD
Each
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
25.40
mm 		47.63
mm 		46.04
mm 		22.23
mm 		1088246 | THS095C-025-W-CS (50 Pcs) --- Thumb Screws - 3/8-16 UNC (9.53mm) x 25.4 mm x 47.63 mm
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-025-W-CS (50 Pcs) Thumb Screws - 3/8-16 UNC (9.53mm) x 25.4 mm x 47.63 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$1,155.68 AUD
$1,155.68 AUD
Per 50
3/8-16 UNC (9.53mm)
25.40
mm 		47.63
mm 		1088246 | THS095C-025-W-CS (50 Pcs) --- Thumb Screws - 3/8-16 UNC (9.53mm) x 25.4 mm x 47.63 mm
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-025-W-CS (50 Pcs) Thumb Screws - 3/8-16 UNC (9.53mm) x 25.4 mm x 47.63 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$1,155.68 AUD
$1,155.68 AUD
Per 50
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
25.40
mm 		50.80
mm 		36.51
mm 		25.40
mm 		1088247 | THS095C-025-W-CS-WF (50 Pcs) --- Thumb Screws - 3/8-16 UNC (9.53mm) x 25.4 mm x 50.8 mm
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS095C-025-W-CS-WF (50 Pcs) Thumb Screws - 3/8-16 UNC (9.53mm) x 25.4 mm x 50.8 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$1,032.41 AUD
$1,032.41 AUD
Per 50
3/8-16 UNC (9.53mm)
25.40
mm 		50.80
mm 		1088247 | THS095C-025-W-CS-WF (50 Pcs) --- Thumb Screws - 3/8-16 UNC (9.53mm) x 25.4 mm x 50.8 mm
Material: Malleable Iron    Head Diameter (A): 36.51 mm    Head Height (H): 25.40 mm    Finish: Tumbled    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS095C-025-W-CS-WF (50 Pcs) Thumb Screws - 3/8-16 UNC (9.53mm) x 25.4 mm x 50.8 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$1,032.41 AUD
$1,032.41 AUD
Per 50
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
38.10
mm 		60.33
mm 		46.04
mm 		22.23
mm 		1088479 | THS095C-038-W-CS --- Thumb Screws - 3/8-16 UNC (9.53mm) x 38.1 mm x 60.33 mm
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-038-W-CS Thumb Screws - 3/8-16 UNC (9.53mm) x 38.1 mm x 60.33 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$17.41 AUD
$17.41 AUD
Each
3/8-16 UNC (9.53mm)
38.10
mm 		60.33
mm 		1088479 | THS095C-038-W-CS --- Thumb Screws - 3/8-16 UNC (9.53mm) x 38.1 mm x 60.33 mm
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-038-W-CS Thumb Screws - 3/8-16 UNC (9.53mm) x 38.1 mm x 60.33 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$17.41 AUD
$17.41 AUD
Each
View the product page first if you are unsure.
1/2-13 UNC (12.7mm)
76.20
mm 		101.60
mm 		57.15
mm 		25.40
mm 		Vite a testa zigrinata 1/2-13 UNC x 76,20 mm Acciaio - Aletta - MBA (confezione da 1)
Material: Steel    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vite a testa zigrinata 1/2-13 UNC x 76,20 mm Acciaio - Aletta - MBA (confezione da 1) Vite a testa zigrinata 1/2-13 UNC x 76,20 mm Acciaio - Aletta - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$28.95 AUD
$28.95 AUD
Each
1/2-13 UNC (12.7mm)
76.20
mm 		101.60
mm 		Vite a testa zigrinata 1/2-13 UNC x 76,20 mm Acciaio - Aletta - MBA (confezione da 1)
Material: Steel    Head Diameter (A): 57.15 mm    Head Height (H): 25.40 mm    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: Vite a testa zigrinata 1/2-13 UNC x 76,20 mm Acciaio - Aletta - MBA (confezione da 1) Vite a testa zigrinata 1/2-13 UNC x 76,20 mm Acciaio - Aletta - MBA (confezione da 1) / Screws
Out of Stock | Backorder Now | Orders can be expected around Sat, Apr 05, 2025
$28.95 AUD
$28.95 AUD
Each
View the product page first if you are unsure.