Retaining Rings - Internal

1160 Products in this selection

This is a combined category of products from Internal Retaining Rings. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Anderton Cross Reference PDF
Circlips PDF Catalogue
Circlip Tools
Housing Bore (B) Clip Thickness (T) Groove Dia. (Dg) Approx. Loose Circlip OD (Dr) Radial Wall (S) Groove Width (W) Indicative
Image
6.35
mm 		0.31
mm
+/-0.025 		6.81
mm
+0.00/-0.05 		7.11
mm
+0.25/-0.13 		0.51
mm
+0.05/-0.00 		1071578 | CCI-00635-CZY (100 Pcs) --- Circlips - 6.35 mm x 0.31 mm x 6.81 mm
Material: Carbon Steel Zinc Plated    Clearance in Bore (C): 2.79 mm    Clearance in Groove (C1): 3.30 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00635-CZY (100 Pcs) Circlips - 6.35 mm x 0.31 mm x 6.81 mm / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$49.68 AUD
$49.68 AUD
Per 100
Housing Bore (B) Clip Thickness (T) Groove Dia. (Dg) Approx. Loose Circlip OD (Dr) Indicative
Image
6.35
mm 		0.31
mm
+/-0.025 		6.81
mm
+0.00/-0.05 		7.11
mm
+0.25/-0.13 		1071578 | CCI-00635-CZY (100 Pcs) --- Circlips - 6.35 mm x 0.31 mm x 6.81 mm
Material: Carbon Steel Zinc Plated    Groove Width (W): 0.51 mm +0.05/-0.00   Clearance in Bore (C): 2.79 mm    Clearance in Groove (C1): 3.30 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00635-CZY (100 Pcs) Circlips - 6.35 mm x 0.31 mm x 6.81 mm / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$49.68 AUD
$49.68 AUD
Per 100
6.35
mm 		0.31
mm
+/-0.025 		6.81
mm
+0.00/-0.05 		7.11
mm
+0.25/-0.13 		0.51
mm
+0.05/-0.00 		1071579 | CCI-00635-C (50 Pcs) --- Circlips - 6.35 mm x 0.31 mm x 6.81 mm
Material: Carbon Steel    Clearance in Bore (C): 2.79 mm    Clearance in Groove (C1): 3.30 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00635-C (50 Pcs) Circlips - 6.35 mm x 0.31 mm x 6.81 mm / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$13.50 AUD
$13.50 AUD
Per 50
6.35
mm 		0.31
mm
+/-0.025 		6.81
mm
+0.00/-0.05 		7.11
mm
+0.25/-0.13 		1071579 | CCI-00635-C (50 Pcs) --- Circlips - 6.35 mm x 0.31 mm x 6.81 mm
Material: Carbon Steel    Groove Width (W): 0.51 mm +0.05/-0.00   Clearance in Bore (C): 2.79 mm    Clearance in Groove (C1): 3.30 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00635-C (50 Pcs) Circlips - 6.35 mm x 0.31 mm x 6.81 mm / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$13.50 AUD
$13.50 AUD
Per 50
6.35
mm 		0.31
mm
+/-0.025 		6.81
mm
+0.00/-0.05 		7.11
mm
+0.25/-0.13 		0.51
mm
+0.05/-0.00 		1071580 | CCI-00635-S15 (2 Pcs) --- Circlips - 6.35 mm x 0.31 mm x 6.81 mm
Material: Stainless PH15-7 Mo    Clearance in Bore (C): 2.79 mm    Clearance in Groove (C1): 3.30 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00635-S15 (2 Pcs) Circlips - 6.35 mm x 0.31 mm x 6.81 mm / Retaining Rings
155 units (310 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$4.95 AUD
$4.95 AUD
Per 2
6.35
mm 		0.31
mm
+/-0.025 		6.81
mm
+0.00/-0.05 		7.11
mm
+0.25/-0.13 		1071580 | CCI-00635-S15 (2 Pcs) --- Circlips - 6.35 mm x 0.31 mm x 6.81 mm
Material: Stainless PH15-7 Mo    Groove Width (W): 0.51 mm +0.05/-0.00   Clearance in Bore (C): 2.79 mm    Clearance in Groove (C1): 3.30 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00635-S15 (2 Pcs) Circlips - 6.35 mm x 0.31 mm x 6.81 mm / Retaining Rings
155 units (310 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$4.95 AUD
$4.95 AUD
Per 2
7.00
mm 		0.80
mm
+0/-0.10 		7.30
mm 		7.50
mm 		1.00
mm
+0/-0.10 		0.90
mm
+0.09/-0.00 		1076420 | WRI-0070-LS --- Snap - 7 mm x 0.8 mm x 7.3 mm
Material: Spring Steel    Clearance in Groove (C1): 5.5 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0070-LS Snap - 7 mm x 0.8 mm x 7.3 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity
7.00
mm 		0.80
mm
+0/-0.10 		7.30
mm 		7.50
mm 		1076420 | WRI-0070-LS --- Snap - 7 mm x 0.8 mm x 7.3 mm
Material: Spring Steel    Radial Wall (S): 1.00 mm +0/-0.10    Groove Width (W): 0.90 mm +0.09/-0.00   Clearance in Groove (C1): 5.5 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0070-LS Snap - 7 mm x 0.8 mm x 7.3 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity |
7.00
mm 		0.8
mm
B DIN 2076 		7.80
mm
+0.3/-0.0 		7.90
mm 		1.00
mm 		1076421 | WRI-0070-RD --- Circlips - 7 mm x 0.8 mm x 7.8 mm
Material: Spring Steel    Clearance in Bore (C): 6.3 mm   
Category: Retaining Rings - Internal - Round Wire
Part Number: WRI-0070-RD Circlips - 7 mm x 0.8 mm x 7.8 mm / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$8.68 AUD
$8.68 AUD
Each
7.00
mm 		0.8
mm
B DIN 2076 		7.80
mm
+0.3/-0.0 		7.90
mm 		1076421 | WRI-0070-RD --- Circlips - 7 mm x 0.8 mm x 7.8 mm
Material: Spring Steel    Groove Width (W): 1.00 mm    Clearance in Bore (C): 6.3 mm   
Category: Retaining Rings - Internal - Round Wire
Part Number: WRI-0070-RD Circlips - 7 mm x 0.8 mm x 7.8 mm / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$8.68 AUD
$8.68 AUD
Each
7.94
mm 		0.31
mm
+/-0.025 		8.38
mm
+0.00/-0.05 		8.79
mm
+0.25/-0.13 		0.51
mm
+0.05/-0.00 		1079629 | CCI-00794-S15 (5 Pcs) --- Circlips - 7.94 mm x 0.31 mm x 8.38 mm
Material: Stainless PH15-7 Mo    Clearance in Bore (C): 4.32 mm    Clearance in Groove (C1): 4.83 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00794-S15 (5 Pcs) Circlips - 7.94 mm x 0.31 mm x 8.38 mm / Retaining Rings
4 units (20 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$11.23 AUD
$11.23 AUD
Per 5
7.94
mm 		0.31
mm
+/-0.025 		8.38
mm
+0.00/-0.05 		8.79
mm
+0.25/-0.13 		1079629 | CCI-00794-S15 (5 Pcs) --- Circlips - 7.94 mm x 0.31 mm x 8.38 mm
Material: Stainless PH15-7 Mo    Groove Width (W): 0.51 mm +0.05/-0.00   Clearance in Bore (C): 4.32 mm    Clearance in Groove (C1): 4.83 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00794-S15 (5 Pcs) Circlips - 7.94 mm x 0.31 mm x 8.38 mm / Retaining Rings
4 units (20 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$11.23 AUD
$11.23 AUD
Per 5
7.94
mm 		0.31
mm
+/-0.025 		8.38
mm
+0.00/-0.05 		8.79
mm
+0.25/-0.13 		0.51
mm
+0.05/-0.00 		1079630 | CCI-00794-C (20 Pcs) --- Circlips - 7.94 mm x 0.31 mm x 8.38 mm
Material: Carbon Steel    Clearance in Bore (C): 4.32 mm    Clearance in Groove (C1): 4.83 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00794-C (20 Pcs) Circlips - 7.94 mm x 0.31 mm x 8.38 mm / Retaining Rings
4 units (80 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$5.59 AUD
$5.59 AUD
Per 20
7.94
mm 		0.31
mm
+/-0.025 		8.38
mm
+0.00/-0.05 		8.79
mm
+0.25/-0.13 		1079630 | CCI-00794-C (20 Pcs) --- Circlips - 7.94 mm x 0.31 mm x 8.38 mm
Material: Carbon Steel    Groove Width (W): 0.51 mm +0.05/-0.00   Clearance in Bore (C): 4.32 mm    Clearance in Groove (C1): 4.83 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00794-C (20 Pcs) Circlips - 7.94 mm x 0.31 mm x 8.38 mm / Retaining Rings
4 units (80 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$5.59 AUD
$5.59 AUD
Per 20
7.94
mm 		0.31
mm
+/-0.025 		8.38
mm
+0.00/-0.05 		8.79
mm
+0.25/-0.13 		0.51
mm
+0.05/-0.00 		1079631 | CCI-00794-CZY (100 Pcs) --- Circlips - 7.94 mm x 0.31 mm x 8.38 mm
Material: Carbon Steel Zinc Plated    Clearance in Bore (C): 4.32 mm    Clearance in Groove (C1): 4.83 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00794-CZY (100 Pcs) Circlips - 7.94 mm x 0.31 mm x 8.38 mm / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$50.95 AUD
$50.95 AUD
Per 100
7.94
mm 		0.31
mm
+/-0.025 		8.38
mm
+0.00/-0.05 		8.79
mm
+0.25/-0.13 		1079631 | CCI-00794-CZY (100 Pcs) --- Circlips - 7.94 mm x 0.31 mm x 8.38 mm
Material: Carbon Steel Zinc Plated    Groove Width (W): 0.51 mm +0.05/-0.00   Clearance in Bore (C): 4.32 mm    Clearance in Groove (C1): 4.83 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00794-CZY (100 Pcs) Circlips - 7.94 mm x 0.31 mm x 8.38 mm / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$50.95 AUD
$50.95 AUD
Per 100
8.00
mm 		0.80
mm
+0/-0.10 		8.30
mm 		8.50
mm 		1.00
mm
+0/-0.10 		0.90
mm
+0.09/-0.00 		1080639 | WRI-0080-LS (30 Pcs) --- Snap - 8 mm x 0.8 mm x 8.3 mm
Material: Spring Steel    Clearance in Groove (C1): 6.5 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0080-LS (30 Pcs) Snap - 8 mm x 0.8 mm x 8.3 mm / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Jan 13, 2025
$150.95 AUD
$150.95 AUD
Per 30
8.00
mm 		0.80
mm
+0/-0.10 		8.30
mm 		8.50
mm 		1080639 | WRI-0080-LS (30 Pcs) --- Snap - 8 mm x 0.8 mm x 8.3 mm
Material: Spring Steel    Radial Wall (S): 1.00 mm +0/-0.10    Groove Width (W): 0.90 mm +0.09/-0.00   Clearance in Groove (C1): 6.5 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0080-LS (30 Pcs) Snap - 8 mm x 0.8 mm x 8.3 mm / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Jan 13, 2025
$150.95 AUD
$150.95 AUD
Per 30
8.00
mm 		0.80
mm
+0.09/-0.00 		8.40
mm
+0.00/-0.05 		8.70
mm
+0.36/-0.10 		0.90
mm
+0.05/-0.00 		Anello elastico interno 8 x 0,8 mm - Acciaio al carbonio - Alloggiamento 8,00 - MBA (confezione da 50)
Material: Carbon Steel    Clearance in Bore (C): 3.00 mm    Clearance in Groove (C1): 3.60 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 8 x 0,8 mm - Acciaio al carbonio - Alloggiamento 8,00 - MBA (confezione da 50) Anello elastico interno 8 x 0,8 mm - Acciaio al carbonio - Alloggiamento 8,00 - MBA (confezione da 50) / Retaining Rings
373 units (18650 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$5.95 AUD
$5.95 AUD
Per 50
8.00
mm 		0.80
mm
+0.09/-0.00 		8.40
mm
+0.00/-0.05 		8.70
mm
+0.36/-0.10 		Anello elastico interno 8 x 0,8 mm - Acciaio al carbonio - Alloggiamento 8,00 - MBA (confezione da 50)
Material: Carbon Steel    Groove Width (W): 0.90 mm +0.05/-0.00   Clearance in Bore (C): 3.00 mm    Clearance in Groove (C1): 3.60 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 8 x 0,8 mm - Acciaio al carbonio - Alloggiamento 8,00 - MBA (confezione da 50) Anello elastico interno 8 x 0,8 mm - Acciaio al carbonio - Alloggiamento 8,00 - MBA (confezione da 50) / Retaining Rings
373 units (18650 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$5.95 AUD
$5.95 AUD
Per 50
8.00
mm 		0.80
mm
+0.09/-0.00 		8.40
mm
+0.00/-0.05 		8.70
mm
+0.36/-0.10 		0.90
mm
+0.05/-0.00 		Anello elastico interno 8 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 8,00 - MBA (confezione da 5)
Material: Stainless PH15-7 Mo    Clearance in Bore (C): 3.00 mm    Clearance in Groove (C1): 3.60 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 8 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 8,00 - MBA (confezione da 5) Anello elastico interno 8 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 8,00 - MBA (confezione da 5) / Retaining Rings
3 units (15 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$14.32 AUD
$14.32 AUD
Per 5
8.00
mm 		0.80
mm
+0.09/-0.00 		8.40
mm
+0.00/-0.05 		8.70
mm
+0.36/-0.10 		Anello elastico interno 8 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 8,00 - MBA (confezione da 5)
Material: Stainless PH15-7 Mo    Groove Width (W): 0.90 mm +0.05/-0.00   Clearance in Bore (C): 3.00 mm    Clearance in Groove (C1): 3.60 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 8 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 8,00 - MBA (confezione da 5) Anello elastico interno 8 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 8,00 - MBA (confezione da 5) / Retaining Rings
3 units (15 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$14.32 AUD
$14.32 AUD
Per 5
8.00
mm 		0.8
mm
B DIN 2076 		8.80
mm
+0.3/-0.0 		8.90
mm 		1.00
mm 		1080642 | WRI-0080-RD (31 Pcs) --- Circlips - 8 mm x 0.8 mm x 8.8 mm
Material: Spring Steel    Clearance in Bore (C): 7.3 mm   
Category: Retaining Rings - Internal - Round Wire
Part Number: WRI-0080-RD (31 Pcs) Circlips - 8 mm x 0.8 mm x 8.8 mm / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$20.41 AUD
$20.41 AUD
Per 31
8.00
mm 		0.8
mm
B DIN 2076 		8.80
mm
+0.3/-0.0 		8.90
mm 		1080642 | WRI-0080-RD (31 Pcs) --- Circlips - 8 mm x 0.8 mm x 8.8 mm
Material: Spring Steel    Groove Width (W): 1.00 mm    Clearance in Bore (C): 7.3 mm   
Category: Retaining Rings - Internal - Round Wire
Part Number: WRI-0080-RD (31 Pcs) Circlips - 8 mm x 0.8 mm x 8.8 mm / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$20.41 AUD
$20.41 AUD
Per 31
9.00
mm 		0.80
mm
+0/-0.10 		9.30
mm 		9.50
mm 		1.10
mm
+0/-0.10 		0.90
mm
+0.09/-0.00 		1085286 | WRI-0090-LS --- Snap - 9 mm x 0.8 mm x 9.3 mm
Material: Spring Steel    Clearance in Groove (C1): 7.3 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0090-LS Snap - 9 mm x 0.8 mm x 9.3 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity
9.00
mm 		0.80
mm
+0/-0.10 		9.30
mm 		9.50
mm 		1085286 | WRI-0090-LS --- Snap - 9 mm x 0.8 mm x 9.3 mm
Material: Spring Steel    Radial Wall (S): 1.10 mm +0/-0.10    Groove Width (W): 0.90 mm +0.09/-0.00   Clearance in Groove (C1): 7.3 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0090-LS Snap - 9 mm x 0.8 mm x 9.3 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity |
9.00
mm 		0.80
mm
+0.09/-0.00 		9.40
mm
+0.00/-0.05 		9.80
mm
+0.36/-0.10 		0.90
mm
+0.05/-0.00 		Anello elastico interno 9 x 0,8 mm - Acciaio al carbonio - Alloggiamento 9,00 - MBA (confezione da 50)
Material: Carbon Steel    Clearance in Bore (C): 3.70 mm    Clearance in Groove (C1): 4.40 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 9 x 0,8 mm - Acciaio al carbonio - Alloggiamento 9,00 - MBA (confezione da 50) Anello elastico interno 9 x 0,8 mm - Acciaio al carbonio - Alloggiamento 9,00 - MBA (confezione da 50) / Retaining Rings
20 units (1000 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$6.23 AUD
$6.23 AUD
Per 50
9.00
mm 		0.80
mm
+0.09/-0.00 		9.40
mm
+0.00/-0.05 		9.80
mm
+0.36/-0.10 		Anello elastico interno 9 x 0,8 mm - Acciaio al carbonio - Alloggiamento 9,00 - MBA (confezione da 50)
Material: Carbon Steel    Groove Width (W): 0.90 mm +0.05/-0.00   Clearance in Bore (C): 3.70 mm    Clearance in Groove (C1): 4.40 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 9 x 0,8 mm - Acciaio al carbonio - Alloggiamento 9,00 - MBA (confezione da 50) Anello elastico interno 9 x 0,8 mm - Acciaio al carbonio - Alloggiamento 9,00 - MBA (confezione da 50) / Retaining Rings
20 units (1000 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$6.23 AUD
$6.23 AUD
Per 50
9.00
mm 		0.80
mm
+0.09/-0.00 		9.40
mm
+0.00/-0.05 		9.80
mm
+0.36/-0.10 		0.90
mm
+0.05/-0.00 		Anello elastico interno 9 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,00 - MBA (confezione da 1)
Material: Stainless PH15-7 Mo    Clearance in Bore (C): 3.70 mm    Clearance in Groove (C1): 4.40 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 9 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,00 - MBA (confezione da 1) Anello elastico interno 9 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,00 - MBA (confezione da 1) / Retaining Rings
38 units (76 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$4.68 AUD
$4.68 AUD
Per 2
9.00
mm 		0.80
mm
+0.09/-0.00 		9.40
mm
+0.00/-0.05 		9.80
mm
+0.36/-0.10 		Anello elastico interno 9 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,00 - MBA (confezione da 1)
Material: Stainless PH15-7 Mo    Groove Width (W): 0.90 mm +0.05/-0.00   Clearance in Bore (C): 3.70 mm    Clearance in Groove (C1): 4.40 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 9 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,00 - MBA (confezione da 1) Anello elastico interno 9 x 0,8 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,00 - MBA (confezione da 1) / Retaining Rings
38 units (76 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$4.68 AUD
$4.68 AUD
Per 2
9.53
mm 		0.64
mm
+/-0.05 		10.03
mm 		10.16
mm
+0.51/-0.00 		0.89
mm
+/-0.08 		0.71
mm
+/-0.08 		1089545 | WRI-0095-LS-O --- Ring - 9.53 mm x 0.64 mm x 10.03 mm
Material: Spring Steel    Clearance in Groove (C1): 8.38 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0095-LS-O Ring - 9.53 mm x 0.64 mm x 10.03 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity
9.53
mm 		0.64
mm
+/-0.05 		10.03
mm 		10.16
mm
+0.51/-0.00 		1089545 | WRI-0095-LS-O --- Ring - 9.53 mm x 0.64 mm x 10.03 mm
Material: Spring Steel    Radial Wall (S): 0.89 mm +/-0.08    Groove Width (W): 0.71 mm +/-0.08   Clearance in Groove (C1): 8.38 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0095-LS-O Ring - 9.53 mm x 0.64 mm x 10.03 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity |
9.53
mm 		0.64
mm
+/-0.050 		10.08
mm
+0.00/-0.05 		10.54
mm
+0.25/-0.13 		0.74
mm
+0.08/-0.00 		Anello elastico interno 9,53 x 0,64 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,53 - MBA (confezione da 1)
Material: Stainless PH15-7 Mo    Clearance in Bore (C): 5.08 mm    Clearance in Groove (C1): 5.59 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 9,53 x 0,64 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,53 - MBA (confezione da 1) Anello elastico interno 9,53 x 0,64 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,53 - MBA (confezione da 1) / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Tue, Apr 22, 2025
$5.95 AUD
$5.95 AUD
Per 2
9.53
mm 		0.64
mm
+/-0.050 		10.08
mm
+0.00/-0.05 		10.54
mm
+0.25/-0.13 		Anello elastico interno 9,53 x 0,64 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,53 - MBA (confezione da 1)
Material: Stainless PH15-7 Mo    Groove Width (W): 0.74 mm +0.08/-0.00   Clearance in Bore (C): 5.08 mm    Clearance in Groove (C1): 5.59 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 9,53 x 0,64 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,53 - MBA (confezione da 1) Anello elastico interno 9,53 x 0,64 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 9,53 - MBA (confezione da 1) / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Tue, Apr 22, 2025
$5.95 AUD
$5.95 AUD
Per 2
9.53
mm 		0.64
mm
+/-0.050 		10.08
mm
+0.00/-0.05 		10.54
mm
+0.25/-0.13 		0.74
mm
+0.08/-0.00 		Anello elastico interno 9,53 x 0,64 mm - Acciaio al carbonio zincato - Alloggiamento 9,53 - MBA (confezione da 5)
Material: Carbon Steel Zinc Plated    Clearance in Bore (C): 5.08 mm    Clearance in Groove (C1): 5.59 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 9,53 x 0,64 mm - Acciaio al carbonio zincato - Alloggiamento 9,53 - MBA (confezione da 5) Anello elastico interno 9,53 x 0,64 mm - Acciaio al carbonio zincato - Alloggiamento 9,53 - MBA (confezione da 5) / Retaining Rings
38 units (190 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$2.59 AUD
$2.59 AUD
Per 5
9.53
mm 		0.64
mm
+/-0.050 		10.08
mm
+0.00/-0.05 		10.54
mm
+0.25/-0.13 		Anello elastico interno 9,53 x 0,64 mm - Acciaio al carbonio zincato - Alloggiamento 9,53 - MBA (confezione da 5)
Material: Carbon Steel Zinc Plated    Groove Width (W): 0.74 mm +0.08/-0.00   Clearance in Bore (C): 5.08 mm    Clearance in Groove (C1): 5.59 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 9,53 x 0,64 mm - Acciaio al carbonio zincato - Alloggiamento 9,53 - MBA (confezione da 5) Anello elastico interno 9,53 x 0,64 mm - Acciaio al carbonio zincato - Alloggiamento 9,53 - MBA (confezione da 5) / Retaining Rings
38 units (190 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$2.59 AUD
$2.59 AUD
Per 5
9.53
mm 		0.64
mm
+/-0.050 		10.08
mm
+0.00/-0.05 		10.54
mm
+0.25/-0.13 		0.74
mm
+0.08/-0.00 		1089548 | CCI-00953-C (100 Pcs) --- Circlips - 9.53 mm x 0.64 mm x 10.08 mm
Material: Carbon Steel    Clearance in Bore (C): 5.08 mm    Clearance in Groove (C1): 5.59 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00953-C (100 Pcs) Circlips - 9.53 mm x 0.64 mm x 10.08 mm / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$26.05 AUD
$26.05 AUD
Per 100
9.53
mm 		0.64
mm
+/-0.050 		10.08
mm
+0.00/-0.05 		10.54
mm
+0.25/-0.13 		1089548 | CCI-00953-C (100 Pcs) --- Circlips - 9.53 mm x 0.64 mm x 10.08 mm
Material: Carbon Steel    Groove Width (W): 0.74 mm +0.08/-0.00   Clearance in Bore (C): 5.08 mm    Clearance in Groove (C1): 5.59 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-00953-C (100 Pcs) Circlips - 9.53 mm x 0.64 mm x 10.08 mm / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$26.05 AUD
$26.05 AUD
Per 100
10.00
mm 		0.60
mm
+0.11/-0.00 		10.50
mm
+0.00/-0.05 		10.90
mm
+0.42/-0.13 		1.4 - 1.5
mm 		0.70
mm 		1090665 | CCI-01000-C-V --- Circlips - 10 mm x 0.6 mm x 10.5 mm
Material: Spring Steel   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-01000-C-V Circlips - 10 mm x 0.6 mm x 10.5 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity
10.00
mm 		0.60
mm
+0.11/-0.00 		10.50
mm
+0.00/-0.05 		10.90
mm
+0.42/-0.13 		1090665 | CCI-01000-C-V --- Circlips - 10 mm x 0.6 mm x 10.5 mm
Material: Spring Steel    Radial Wall (S): 1.4 - 1.5 mm    Groove Width (W): 0.70 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: CCI-01000-C-V Circlips - 10 mm x 0.6 mm x 10.5 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity |
10.00
mm 		0.80
mm
+0/-0.10 		10.40
mm 		10.60
mm 		1.20
mm
+0/-0.10 		0.90
mm
+0.09/-0.00 		1090667 | WRI-0100-LS --- Snap - 10 mm x 0.8 mm x 10.4 mm
Material: Spring Steel    Clearance in Groove (C1): 8.2 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0100-LS Snap - 10 mm x 0.8 mm x 10.4 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity
10.00
mm 		0.80
mm
+0/-0.10 		10.40
mm 		10.60
mm 		1090667 | WRI-0100-LS --- Snap - 10 mm x 0.8 mm x 10.4 mm
Material: Spring Steel    Radial Wall (S): 1.20 mm +0/-0.10    Groove Width (W): 0.90 mm +0.09/-0.00   Clearance in Groove (C1): 8.2 mm   
Category: Retaining Rings - Internal - Snap Rings
Part Number: WRI-0100-LS Snap - 10 mm x 0.8 mm x 10.4 mm / Retaining Rings
Contact Us
Item Discontinued - Please contact us if you need a large quantity |
10.00
mm 		0.8
mm
B DIN 2076 		10.80
mm
+0.3/-0.0 		10.90
mm 		1.00
mm 		Anello interno 10 x 0,8 mm - Filo tondo in acciaio per molle - Foro alloggiamento 10,00 - MBA (confezione da 50)
Material: Spring Steel    Clearance in Bore (C): 9.3 mm   
Category: Retaining Rings - Internal - Round Wire
Part Number: Anello interno 10 x 0,8 mm - Filo tondo in acciaio per molle - Foro alloggiamento 10,00 - MBA (confezione da 50) Anello interno 10 x 0,8 mm - Filo tondo in acciaio per molle - Foro alloggiamento 10,00 - MBA (confezione da 50) / Retaining Rings
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Aug 15, 2025
$7.23 AUD
$7.23 AUD
Per 50
10.00
mm 		0.8
mm
B DIN 2076 		10.80
mm
+0.3/-0.0 		10.90
mm 		Anello interno 10 x 0,8 mm - Filo tondo in acciaio per molle - Foro alloggiamento 10,00 - MBA (confezione da 50)
Material: Spring Steel    Groove Width (W): 1.00 mm    Clearance in Bore (C): 9.3 mm   
Category: Retaining Rings - Internal - Round Wire
Part Number: Anello interno 10 x 0,8 mm - Filo tondo in acciaio per molle - Foro alloggiamento 10,00 - MBA (confezione da 50) Anello interno 10 x 0,8 mm - Filo tondo in acciaio per molle - Foro alloggiamento 10,00 - MBA (confezione da 50) / Retaining Rings
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Aug 15, 2025
$7.23 AUD
$7.23 AUD
Per 50
10.00
mm 		1.00
mm
+0.11/-0.00 		10.40
mm
+0.00/-0.06 		10.80
mm
+0.36/-0.10 		1.10
mm
+0.05/-0.00 		Anello elastico interno 10 x 1 mm - Acciaio al carbonio - Alloggiamento 10.00 - MBA (confezione da 50)
Material: Carbon Steel    Clearance in Bore (C): 3.30 mm    Clearance in Groove (C1): 4.00 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 10 x 1 mm - Acciaio al carbonio - Alloggiamento 10.00 - MBA (confezione da 50) Anello elastico interno 10 x 1 mm - Acciaio al carbonio - Alloggiamento 10.00 - MBA (confezione da 50) / Retaining Rings
18 units (900 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$6.14 AUD
$6.14 AUD
Per 50
10.00
mm 		1.00
mm
+0.11/-0.00 		10.40
mm
+0.00/-0.06 		10.80
mm
+0.36/-0.10 		Anello elastico interno 10 x 1 mm - Acciaio al carbonio - Alloggiamento 10.00 - MBA (confezione da 50)
Material: Carbon Steel    Groove Width (W): 1.10 mm +0.05/-0.00   Clearance in Bore (C): 3.30 mm    Clearance in Groove (C1): 4.00 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 10 x 1 mm - Acciaio al carbonio - Alloggiamento 10.00 - MBA (confezione da 50) Anello elastico interno 10 x 1 mm - Acciaio al carbonio - Alloggiamento 10.00 - MBA (confezione da 50) / Retaining Rings
18 units (900 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$6.14 AUD
$6.14 AUD
Per 50
10.00
mm 		1.00
mm
+0.11/-0.00 		10.40
mm
+0.00/-0.06 		10.80
mm
+0.36/-0.10 		1.10
mm
+0.05/-0.00 		Anello elastico interno 10 x 1 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 10.00 - MBA (confezione da 5)
Material: Stainless PH15-7 Mo    Clearance in Bore (C): 3.30 mm    Clearance in Groove (C1): 4.00 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 10 x 1 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 10.00 - MBA (confezione da 5) Anello elastico interno 10 x 1 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 10.00 - MBA (confezione da 5) / Retaining Rings
13 units (65 pcs) Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$15.86 AUD
$15.86 AUD
Per 5
10.00
mm 		1.00
mm
+0.11/-0.00 		10.40
mm
+0.00/-0.06 		10.80
mm
+0.36/-0.10 		Anello elastico interno 10 x 1 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 10.00 - MBA (confezione da 5)
Material: Stainless PH15-7 Mo    Groove Width (W): 1.10 mm +0.05/-0.00   Clearance in Bore (C): 3.30 mm    Clearance in Groove (C1): 4.00 mm   
Category: Retaining Rings - Internal - Circlips
Part Number: Anello elastico interno 10 x 1 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 10.00 - MBA (confezione da 5) Anello elastico interno 10 x 1 mm - Acciaio inossidabile PH15-7 Mo - Alloggiamento 10.00 - MBA (confezione da 5) / Retaining Rings
13 units (65 pcs) Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$15.86 AUD
$15.86 AUD
Per 5