Pulleys - Metric Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock

14 Products in this selection
  • Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Use with GT2 or GT3 type belts.
  • Cast iron with black oxide coating
  • Match with a taperlock bush for your required shaft size
Additional resources:
Timing Pulleys Catalogue PDF
GT 5mm Timing Belts
Teeth Max Belt Width Taperlock Indicative
Image
36
Nr. 		25.00
mm 		1108
 1149421 | P-050G-036-250FF-CB-T1108 --- Pulleys - 36 Teeth x 25 mm x 1108
Material: Cast Iron    Type: 2    Pitch Dia. (D): 57.27 mm    Flange Diameter (FD): 60.3 mm    Overall Length: 32.8 mm   
Part Number: P-050G-036-250FF-CB-T1108 Pulleys - 36 Teeth x 25 mm x 1108
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$110.68 AUD
$110.68 AUD
Each
Teeth Max Belt Width Taperlock Indicative
Image
36
Nr. 		25.00
mm 		1108
 1149421 | P-050G-036-250FF-CB-T1108 --- Pulleys - 36 Teeth x 25 mm x 1108
Material: Cast Iron    Type: 2    Pitch Dia. (D): 57.27 mm    Flange Diameter (FD): 60.3 mm    Overall Length: 32.8 mm   
Part Number: P-050G-036-250FF-CB-T1108 Pulleys - 36 Teeth x 25 mm x 1108
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$110.68 AUD
$110.68 AUD
Each
38
Nr. 		25.00
mm 		1108
 1151002 | P-050G-038-250FF-CB-T1108 --- Pulleys - 38 Teeth x 25 mm x 1108
Material: Cast Iron    Type: 2    Pitch Dia. (D): 60.45 mm    Flange Diameter (FD): 66.7 mm    Overall Length: 32.8 mm   
Part Number: P-050G-038-250FF-CB-T1108 Pulleys - 38 Teeth x 25 mm x 1108
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$114.50 AUD
$114.50 AUD
Each
38
Nr. 		25.00
mm 		1108
 1151002 | P-050G-038-250FF-CB-T1108 --- Pulleys - 38 Teeth x 25 mm x 1108
Material: Cast Iron    Type: 2    Pitch Dia. (D): 60.45 mm    Flange Diameter (FD): 66.7 mm    Overall Length: 32.8 mm   
Part Number: P-050G-038-250FF-CB-T1108 Pulleys - 38 Teeth x 25 mm x 1108
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$114.50 AUD
$114.50 AUD
Each
40
Nr. 		25.00
mm 		1108
 1153366 | P-050G-040-250FF-CB-T1108 --- Pulleys - 40 Teeth x 25 mm x 1108
Material: Cast Iron    Type: 2    Pitch Dia. (D): 63.63 mm    Flange Diameter (FD): 69.9 mm    Overall Length: 32.8 mm   
Part Number: P-050G-040-250FF-CB-T1108 Pulleys - 40 Teeth x 25 mm x 1108
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$122.77 AUD
$122.77 AUD
Each
40
Nr. 		25.00
mm 		1108
 1153366 | P-050G-040-250FF-CB-T1108 --- Pulleys - 40 Teeth x 25 mm x 1108
Material: Cast Iron    Type: 2    Pitch Dia. (D): 63.63 mm    Flange Diameter (FD): 69.9 mm    Overall Length: 32.8 mm   
Part Number: P-050G-040-250FF-CB-T1108 Pulleys - 40 Teeth x 25 mm x 1108
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$122.77 AUD
$122.77 AUD
Each
44
Nr. 		25.00
mm 		1108
 1156801 | P-050G-044-250FF-CB-T1108 --- Pulleys - 44 Teeth x 25 mm x 1108
Material: Cast Iron    Type: 2    Pitch Dia. (D): 70.00 mm    Flange Diameter (FD): 78.6 mm    Overall Length: 32.8 mm   
Part Number: P-050G-044-250FF-CB-T1108 Pulleys - 44 Teeth x 25 mm x 1108
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$136.77 AUD
$136.77 AUD
Each
44
Nr. 		25.00
mm 		1108
 1156801 | P-050G-044-250FF-CB-T1108 --- Pulleys - 44 Teeth x 25 mm x 1108
Material: Cast Iron    Type: 2    Pitch Dia. (D): 70.00 mm    Flange Diameter (FD): 78.6 mm    Overall Length: 32.8 mm   
Part Number: P-050G-044-250FF-CB-T1108 Pulleys - 44 Teeth x 25 mm x 1108
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$136.77 AUD
$136.77 AUD
Each
48
Nr. 		25.00
mm 		1210
 1160169 | P-050G-048-250FF-CB-T1210 --- Pulleys - 48 Teeth x 25 mm x 1210
Material: Cast Iron    Type: 2    Pitch Dia. (D): 76.36 mm    Flange Diameter (FD): 84.6 mm    Overall Length: 32.5 mm   
Part Number: P-050G-048-250FF-CB-T1210 Pulleys - 48 Teeth x 25 mm x 1210
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$139.14 AUD
$139.14 AUD
Each
48
Nr. 		25.00
mm 		1210
 1160169 | P-050G-048-250FF-CB-T1210 --- Pulleys - 48 Teeth x 25 mm x 1210
Material: Cast Iron    Type: 2    Pitch Dia. (D): 76.36 mm    Flange Diameter (FD): 84.6 mm    Overall Length: 32.5 mm   
Part Number: P-050G-048-250FF-CB-T1210 Pulleys - 48 Teeth x 25 mm x 1210
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$139.14 AUD
$139.14 AUD
Each
52
Nr. 		25.00
mm 		1210
 1164084 | P-050G-052-250FF-CB-T1210 --- Pulleys - 52 Teeth x 25 mm x 1210
Material: Cast Iron    Type: 2    Pitch Dia. (D): 82.72 mm    Flange Diameter (FD): 90.6 mm    Overall Length: 32.5 mm   
Part Number: P-050G-052-250FF-CB-T1210 Pulleys - 52 Teeth x 25 mm x 1210
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$150.95 AUD
$150.95 AUD
Each
52
Nr. 		25.00
mm 		1210
 1164084 | P-050G-052-250FF-CB-T1210 --- Pulleys - 52 Teeth x 25 mm x 1210
Material: Cast Iron    Type: 2    Pitch Dia. (D): 82.72 mm    Flange Diameter (FD): 90.6 mm    Overall Length: 32.5 mm   
Part Number: P-050G-052-250FF-CB-T1210 Pulleys - 52 Teeth x 25 mm x 1210
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$150.95 AUD
$150.95 AUD
Each
56
Nr. 		25.00
mm 		1610
 1166399 | P-050G-056-250FF-CB-T1610 --- Pulleys - 56 Teeth x 25 mm x 1610
Material: Cast Iron    Type: 2    Pitch Dia. (D): 89.09 mm    Flange Diameter (FD): 96.5 mm    Overall Length: 32.5 mm   
Part Number: P-050G-056-250FF-CB-T1610 Pulleys - 56 Teeth x 25 mm x 1610
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$157.41 AUD
$157.41 AUD
Each
56
Nr. 		25.00
mm 		1610
 1166399 | P-050G-056-250FF-CB-T1610 --- Pulleys - 56 Teeth x 25 mm x 1610
Material: Cast Iron    Type: 2    Pitch Dia. (D): 89.09 mm    Flange Diameter (FD): 96.5 mm    Overall Length: 32.5 mm   
Part Number: P-050G-056-250FF-CB-T1610 Pulleys - 56 Teeth x 25 mm x 1610
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$157.41 AUD
$157.41 AUD
Each
60
Nr. 		25.00
mm 		1610
 1168585 | P-050G-060-250FF-CB-T1610 --- Pulleys - 60 Teeth x 25 mm x 1610
Material: Cast Iron    Type: 2    Pitch Dia. (D): 95.45 mm    Flange Diameter (FD): 102.7 mm    Overall Length: 32.5 mm   
Part Number: P-050G-060-250FF-CB-T1610 Pulleys - 60 Teeth x 25 mm x 1610
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$186.77 AUD
$186.77 AUD
Each
60
Nr. 		25.00
mm 		1610
 1168585 | P-050G-060-250FF-CB-T1610 --- Pulleys - 60 Teeth x 25 mm x 1610
Material: Cast Iron    Type: 2    Pitch Dia. (D): 95.45 mm    Flange Diameter (FD): 102.7 mm    Overall Length: 32.5 mm   
Part Number: P-050G-060-250FF-CB-T1610 Pulleys - 60 Teeth x 25 mm x 1610
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$186.77 AUD
$186.77 AUD
Each
64
Nr. 		25.00
mm 		1610
 Puleggia dentata 64 denti x 25 mm di larghezza - Foro conico 1610 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 101.81 mm    Flange Diameter (FD): 105.9 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 64 denti x 25 mm di larghezza - Foro conico 1610 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 64 denti x 25 mm di larghezza - Foro conico 1610 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$190.41 AUD
$190.41 AUD
Each
64
Nr. 		25.00
mm 		1610
 Puleggia dentata 64 denti x 25 mm di larghezza - Foro conico 1610 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 101.81 mm    Flange Diameter (FD): 105.9 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 64 denti x 25 mm di larghezza - Foro conico 1610 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 64 denti x 25 mm di larghezza - Foro conico 1610 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$190.41 AUD
$190.41 AUD
Each
68
Nr. 		25.00
mm 		2012
 Puleggia dentata 68 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 108.18 mm    Flange Diameter (FD): 114.8 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 68 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 68 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$205.95 AUD
$205.95 AUD
Each
68
Nr. 		25.00
mm 		2012
 Puleggia dentata 68 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 108.18 mm    Flange Diameter (FD): 114.8 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 68 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 68 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$205.95 AUD
$205.95 AUD
Each
72
Nr. 		25.00
mm 		2012
 Puleggia dentata 72 denti x 25 mm di larghezza - Foro Taperlock 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 114.54 mm    Flange Diameter (FD): 118.6 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 72 denti x 25 mm di larghezza - Foro Taperlock 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 72 denti x 25 mm di larghezza - Foro Taperlock 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$222.68 AUD
$222.68 AUD
Each
72
Nr. 		25.00
mm 		2012
 Puleggia dentata 72 denti x 25 mm di larghezza - Foro Taperlock 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (D): 114.54 mm    Flange Diameter (FD): 118.6 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 72 denti x 25 mm di larghezza - Foro Taperlock 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 72 denti x 25 mm di larghezza - Foro Taperlock 2012 - Ghisa - Doppia flangia - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$222.68 AUD
$222.68 AUD
Each
80
Nr. 		25.00
mm 		2012
 Puleggia dentata 80 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 3    Pitch Dia. (D): 127.27 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 80 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 80 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$446.50 AUD
$446.50 AUD
Each
80
Nr. 		25.00
mm 		2012
 Puleggia dentata 80 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 3    Pitch Dia. (D): 127.27 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 80 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 80 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$446.50 AUD
$446.50 AUD
Each
90
Nr. 		25.00
mm 		2012
 1183482 | P-050G-090-250P-CB-T2012 --- Pulleys - 90 Teeth x 25 mm x 2012
Material: Cast Iron    Type: 3    Pitch Dia. (D): 143.18 mm    Overall Length: 32.5 mm   
Part Number: P-050G-090-250P-CB-T2012 Pulleys - 90 Teeth x 25 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$537.23 AUD
$537.23 AUD
Each
90
Nr. 		25.00
mm 		2012
 1183482 | P-050G-090-250P-CB-T2012 --- Pulleys - 90 Teeth x 25 mm x 2012
Material: Cast Iron    Type: 3    Pitch Dia. (D): 143.18 mm    Overall Length: 32.5 mm   
Part Number: P-050G-090-250P-CB-T2012 Pulleys - 90 Teeth x 25 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$537.23 AUD
$537.23 AUD
Each
112
Nr. 		25.00
mm 		2012
 Puleggia dentata 112 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 3    Pitch Dia. (D): 178.17 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 112 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 112 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$735.68 AUD
$735.68 AUD
Each
112
Nr. 		25.00
mm 		2012
 Puleggia dentata 112 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1)
Material: Cast Iron    Type: 3    Pitch Dia. (D): 178.17 mm    Overall Length: 32.5 mm   
Part Number: Puleggia dentata 112 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1) Puleggia dentata 112 denti x 25 mm di larghezza - Foro conico 2012 - Ghisa - Non flangiata - Passo curvolineare GT 5 mm - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$735.68 AUD
$735.68 AUD
Each