Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide

15 Products in this selection

This is a combined category of products from 76.2mm Wide 12.700mm Pitch H Inch Timing Pulleys. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Timing Pulleys Catalogue PDF
H Section Timing Belts
Teeth Max Belt Width (W) Bore (d) Bore Type Locking Type Indicative
Image
16
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 None
 1115819 | P-H-016-762FF-SB-N-0191U --- Pulleys - 16 Teeth x 76.2 mm x 19.05 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 64.65 mm    Flange Diameter (FD): 70.6 mm    Overall Length: 103.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-016-762FF-SB-N-0191U Pulleys - 16 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$225.23 AUD
$225.23 AUD
Each
Teeth Max Belt Width (W) Bore (d) Bore Type Indicative
Image
16
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 1115819 | P-H-016-762FF-SB-N-0191U --- Pulleys - 16 Teeth x 76.2 mm x 19.05 mm
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 64.65 mm    Flange Diameter (FD): 70.6 mm    Overall Length: 103.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-016-762FF-SB-N-0191U Pulleys - 16 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$225.23 AUD
$225.23 AUD
Each
17
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 None
 1117521 | P-H-017-762FF-SB-N-0191U --- Pulleys - 17 Teeth x 76.2 mm x 19.05 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 68.69 mm    Flange Diameter (FD): 76.2 mm    Overall Length: 103.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-017-762FF-SB-N-0191U Pulleys - 17 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$255.59 AUD
$255.59 AUD
Each
17
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 1117521 | P-H-017-762FF-SB-N-0191U --- Pulleys - 17 Teeth x 76.2 mm x 19.05 mm
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 68.69 mm    Flange Diameter (FD): 76.2 mm    Overall Length: 103.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-017-762FF-SB-N-0191U Pulleys - 17 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$255.59 AUD
$255.59 AUD
Each
18
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 None
 1119267 | P-H-018-762FF-SB-N-0191U --- Pulleys - 18 Teeth x 76.2 mm x 19.05 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 72.73 mm    Flange Diameter (FD): 78.7 mm    Overall Length: 103.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-018-762FF-SB-N-0191U Pulleys - 18 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$283.86 AUD
$283.86 AUD
Each
18
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 1119267 | P-H-018-762FF-SB-N-0191U --- Pulleys - 18 Teeth x 76.2 mm x 19.05 mm
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 72.73 mm    Flange Diameter (FD): 78.7 mm    Overall Length: 103.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-018-762FF-SB-N-0191U Pulleys - 18 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$283.86 AUD
$283.86 AUD
Each
18
Nr. 		76.20
mm 		1215
mm 		1119268 | P-H-018-762FF-SB-T1215 --- Pulleys - 18 Teeth x 76.2 mm x 1215
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 72.73 mm    Flange Diameter (FD): 78.7 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-018-762FF-SB-T1215 Pulleys - 18 Teeth x 76.2 mm x 1215
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$227.14 AUD
$227.14 AUD
Each
18
Nr. 		76.20
mm 		1215
mm 		1119268 | P-H-018-762FF-SB-T1215 --- Pulleys - 18 Teeth x 76.2 mm x 1215
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 72.73 mm    Flange Diameter (FD): 78.7 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-018-762FF-SB-T1215 Pulleys - 18 Teeth x 76.2 mm x 1215
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$227.14 AUD
$227.14 AUD
Each
19
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 None
 1120243 | P-H-019-762FF-SB-N-0191U --- Pulleys - 19 Teeth x 76.2 mm x 19.05 mm
Material: Steel - Black Oxide    Type: 2    Pitch Dia. (PD): 76.77 mm    Flange Diameter (FD): 82.7 mm    Overall Length: 103.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-019-762FF-SB-N-0191U Pulleys - 19 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$303.77 AUD
$303.77 AUD
Each
19
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 1120243 | P-H-019-762FF-SB-N-0191U --- Pulleys - 19 Teeth x 76.2 mm x 19.05 mm
Material: Steel - Black Oxide    Locking Type: None    Type: 2    Pitch Dia. (PD): 76.77 mm    Flange Diameter (FD): 82.7 mm    Overall Length: 103.2 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-019-762FF-SB-N-0191U Pulleys - 19 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$303.77 AUD
$303.77 AUD
Each
20
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 None
 1125820 | P-H-020-762FF-CB-N-0191U --- Pulleys - 20 Teeth x 76.2 mm x 19.05 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm    Flange Diameter (FD): 86.9 mm    Overall Length: 106.4 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-020-762FF-CB-N-0191U Pulleys - 20 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$324.50 AUD
$324.50 AUD
Each
20
Nr. 		76.20
mm 		19.050
mm 		Unfinished
 1125820 | P-H-020-762FF-CB-N-0191U --- Pulleys - 20 Teeth x 76.2 mm x 19.05 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 80.81 mm    Flange Diameter (FD): 86.9 mm    Overall Length: 106.4 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-020-762FF-CB-N-0191U Pulleys - 20 Teeth x 76.2 mm x 19.05 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$324.50 AUD
$324.50 AUD
Each
20
Nr. 		76.20
mm 		1215
mm 		1125821 | P-H-020-762FF-CB-T1215 --- Pulleys - 20 Teeth x 76.2 mm x 1215
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm    Flange Diameter (FD): 82.7 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-020-762FF-CB-T1215 Pulleys - 20 Teeth x 76.2 mm x 1215
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$256.77 AUD
$256.77 AUD
Each
20
Nr. 		76.20
mm 		1215
mm 		1125821 | P-H-020-762FF-CB-T1215 --- Pulleys - 20 Teeth x 76.2 mm x 1215
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 80.81 mm    Flange Diameter (FD): 82.7 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-020-762FF-CB-T1215 Pulleys - 20 Teeth x 76.2 mm x 1215
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$256.77 AUD
$256.77 AUD
Each
22
Nr. 		76.20
mm 		1615
mm 		Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm    Flange Diameter (FD): 94.9 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$282.41 AUD
$282.41 AUD
Each
22
Nr. 		76.20
mm 		1615
mm 		Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 88.90 mm    Flange Diameter (FD): 94.9 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 22 denti x 76,20 di larghezza - Alesaggio conico 1615 - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12.700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$282.41 AUD
$282.41 AUD
Each
24
Nr. 		76.20
mm 		28.575
mm 		Unfinished
 None
 1131514 | P-H-024-762FF-CB-N-0286U --- Pulleys - 24 Teeth x 76.2 mm x 28.575 mm
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 96.98 mm    Flange Diameter (FD): 102.9 mm    Overall Length: 109.5 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-024-762FF-CB-N-0286U Pulleys - 24 Teeth x 76.2 mm x 28.575 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$412.23 AUD
$412.23 AUD
Each
24
Nr. 		76.20
mm 		28.575
mm 		Unfinished
 1131514 | P-H-024-762FF-CB-N-0286U --- Pulleys - 24 Teeth x 76.2 mm x 28.575 mm
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 96.98 mm    Flange Diameter (FD): 102.9 mm    Overall Length: 109.5 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: P-H-024-762FF-CB-N-0286U Pulleys - 24 Teeth x 76.2 mm x 28.575 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$412.23 AUD
$412.23 AUD
Each
24
Nr. 		76.20
mm 		2012
mm 		1131515 | P-H-024-762FF-CB-T2012 --- Pulleys - 24 Teeth x 76.2 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 96.98 mm    Flange Diameter (FD): 102.9 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-024-762FF-CB-T2012 Pulleys - 24 Teeth x 76.2 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$296.68 AUD
$296.68 AUD
Each
24
Nr. 		76.20
mm 		2012
mm 		1131515 | P-H-024-762FF-CB-T2012 --- Pulleys - 24 Teeth x 76.2 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 96.98 mm    Flange Diameter (FD): 102.9 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-024-762FF-CB-T2012 Pulleys - 24 Teeth x 76.2 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$296.68 AUD
$296.68 AUD
Each
26
Nr. 		76.20
mm 		28.575
mm 		Unfinished
 None
 Puleggia dentata 26 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 105.06 mm    Flange Diameter (FD): 111.0 mm    Overall Length: 112.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: Puleggia dentata 26 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 26 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$480.59 AUD
$480.59 AUD
Each
26
Nr. 		76.20
mm 		28.575
mm 		Unfinished
 Puleggia dentata 26 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollice) - MBA (confezione da 1)
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 105.06 mm    Flange Diameter (FD): 111.0 mm    Overall Length: 112.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: Puleggia dentata 26 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollice) - MBA (confezione da 1) Puleggia dentata 26 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollice) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$480.59 AUD
$480.59 AUD
Each
26
Nr. 		76.20
mm 		2012
mm 		1137353 | P-H-026-762FF-CB-T2012 --- Pulleys - 26 Teeth x 76.2 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 105.06 mm    Flange Diameter (FD): 111.0 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-026-762FF-CB-T2012 Pulleys - 26 Teeth x 76.2 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$373.41 AUD
$373.41 AUD
Each
26
Nr. 		76.20
mm 		2012
mm 		1137353 | P-H-026-762FF-CB-T2012 --- Pulleys - 26 Teeth x 76.2 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 105.06 mm    Flange Diameter (FD): 111.0 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-026-762FF-CB-T2012 Pulleys - 26 Teeth x 76.2 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$373.41 AUD
$373.41 AUD
Each
28
Nr. 		76.20
mm 		28.575
mm 		Unfinished
 None
 Puleggia dentata 28 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 113.14 mm    Flange Diameter (FD): 119.1 mm    Overall Length: 112.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: Puleggia dentata 28 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 28 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$571.23 AUD
$571.23 AUD
Each
28
Nr. 		76.20
mm 		28.575
mm 		Unfinished
 Puleggia dentata 28 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 113.14 mm    Flange Diameter (FD): 119.1 mm    Overall Length: 112.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: Puleggia dentata 28 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 28 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$571.23 AUD
$571.23 AUD
Each
28
Nr. 		76.20
mm 		2012
mm 		1139228 | P-H-028-762FF-CB-T2012 --- Pulleys - 28 Teeth x 76.2 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 113.14 mm    Flange Diameter (FD): 119.1 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-028-762FF-CB-T2012 Pulleys - 28 Teeth x 76.2 mm x 2012
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$436.77 AUD
$436.77 AUD
Each
28
Nr. 		76.20
mm 		2012
mm 		1139228 | P-H-028-762FF-CB-T2012 --- Pulleys - 28 Teeth x 76.2 mm x 2012
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 113.14 mm    Flange Diameter (FD): 119.1 mm    Overall Length: 85.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Taperlock
Part Number: P-H-028-762FF-CB-T2012 Pulleys - 28 Teeth x 76.2 mm x 2012
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$436.77 AUD
$436.77 AUD
Each
30
Nr. 		76.20
mm 		28.575
mm 		Unfinished
 None
 Puleggia dentata 30 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Cast Iron    Type: 2    Pitch Dia. (PD): 121.22 mm    Flange Diameter (FD): 127.1 mm    Overall Length: 112.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: Puleggia dentata 30 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 30 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$658.86 AUD
$658.86 AUD
Each
30
Nr. 		76.20
mm 		28.575
mm 		Unfinished
 Puleggia dentata 30 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1)
Material: Cast Iron    Locking Type: None    Type: 2    Pitch Dia. (PD): 121.22 mm    Flange Diameter (FD): 127.1 mm    Overall Length: 112.7 mm   
Category: Pulleys - Inch Timing - 12.700mm Pitch H - 76.2mm Wide - Through Bore
Part Number: Puleggia dentata 30 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) Puleggia dentata 30 denti x 76,20 di larghezza - Foro liscio non finito da 28,575 mm - Ghisa - Doppia flangia - Passo trapezoidale serie H da 12,700 mm (1/2 pollici) - MBA (confezione da 1) / Pulleys
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$658.86 AUD
$658.86 AUD
Each