Plungers - Indexing - Non Locking

39 Products in this selection

This is a combined category of products from Non Locking Indexing Plungers. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Thread (B) Thread Length (H) Initial End Force Final End Force Tip Diameter (A) Nose Length (G) Indicative
Image
3/8-16 UNC (9.525mm)
 47.0
mm 		0.5
N 		1.2
N 		5.0
mm 		5.1
mm 		1048069 | PLIT-050-095C-47-K-C --- Plungers - 3/8-16 UNC (9.525mm) x 47 mm x 0.5 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-050-095C-47-K-C Plungers - 3/8-16 UNC (9.525mm) x 47 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$41.77 AUD
$41.77 AUD
Each
Thread (B) Thread Length (H) Initial End Force Final End Force Indicative
Image
3/8-16 UNC (9.525mm)
 47.0
mm 		0.5
N 		1.2
N 		1048069 | PLIT-050-095C-47-K-C --- Plungers - 3/8-16 UNC (9.525mm) x 47 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.1 mm   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-050-095C-47-K-C Plungers - 3/8-16 UNC (9.525mm) x 47 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$41.77 AUD
$41.77 AUD
Each
3/8-24 UNF (9.525mm)
 47.0
mm 		0.5
N 		1.2
N 		5.0
mm 		5.1
mm 		1048070 | PLIT-050-095F-47-K-C --- Plungers - 3/8-24 UNF (9.525mm) x 47 mm x 0.5 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-050-095F-47-K-C Plungers - 3/8-24 UNF (9.525mm) x 47 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$39.95 AUD
$39.95 AUD
Each
3/8-24 UNF (9.525mm)
 47.0
mm 		0.5
N 		1.2
N 		1048070 | PLIT-050-095F-47-K-C --- Plungers - 3/8-24 UNF (9.525mm) x 47 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.1 mm   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-050-095F-47-K-C Plungers - 3/8-24 UNF (9.525mm) x 47 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$39.95 AUD
$39.95 AUD
Each
5/8-11 UNC (15.875mm)
 73.9
mm 		1.5
N 		3.6
N 		8.0
mm 		7.9
mm 		Stantuffo di indicizzazione 5/8-11 UNC x 73,9 mm - Non bloccabile con manopola in acciaio - Indicizzazione - MBA (confezione da 1)
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: Stantuffo di indicizzazione 5/8-11 UNC x 73,9 mm - Non bloccabile con manopola in acciaio - Indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione 5/8-11 UNC x 73,9 mm - Non bloccabile con manopola in acciaio - Indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$56.50 AUD
$56.50 AUD
Each
5/8-11 UNC (15.875mm)
 73.9
mm 		1.5
N 		3.6
N 		Stantuffo di indicizzazione 5/8-11 UNC x 73,9 mm - Non bloccabile con manopola in acciaio - Indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 8.0 mm    Nose Length (G): 7.9 mm   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: Stantuffo di indicizzazione 5/8-11 UNC x 73,9 mm - Non bloccabile con manopola in acciaio - Indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione 5/8-11 UNC x 73,9 mm - Non bloccabile con manopola in acciaio - Indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$56.50 AUD
$56.50 AUD
Each
3/8-16 UNC (9.525mm)
 37.1
mm 		0.5
N 		1.2
N 		5.0
mm 		5.1
mm 		1088428 | PLIT-050-095C-37-S3 --- Plungers - 3/8-16 UNC (9.525mm) x 37.1 mm x 0.5 N
Material: Stainless 303 Grade   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-050-095C-37-S3 Plungers - 3/8-16 UNC (9.525mm) x 37.1 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$60.59 AUD
$60.59 AUD
Each
3/8-16 UNC (9.525mm)
 37.1
mm 		0.5
N 		1.2
N 		1088428 | PLIT-050-095C-37-S3 --- Plungers - 3/8-16 UNC (9.525mm) x 37.1 mm x 0.5 N
Material: Stainless 303 Grade    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.1 mm   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-050-095C-37-S3 Plungers - 3/8-16 UNC (9.525mm) x 37.1 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$60.59 AUD
$60.59 AUD
Each
3/8-16 UNC (9.525mm)
 37.1
mm 		0.5
N 		1.2
N 		5.0
mm 		5.1
mm 		1088429 | PLIT-050-095C-37-C --- Plungers - 3/8-16 UNC (9.525mm) x 37.1 mm x 0.5 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-050-095C-37-C Plungers - 3/8-16 UNC (9.525mm) x 37.1 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$39.86 AUD
$39.86 AUD
Each
3/8-16 UNC (9.525mm)
 37.1
mm 		0.5
N 		1.2
N 		1088429 | PLIT-050-095C-37-C --- Plungers - 3/8-16 UNC (9.525mm) x 37.1 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.1 mm   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-050-095C-37-C Plungers - 3/8-16 UNC (9.525mm) x 37.1 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$39.86 AUD
$39.86 AUD
Each
3/8-24 UNF (9.525mm)
 37.1
mm 		0.5
N 		1.2
N 		5.0
mm 		5.1
mm 		1088430 | PLIT-050-095F-37-C --- Plungers - 3/8-24 UNF (9.525mm) x 37.1 mm x 0.5 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-050-095F-37-C Plungers - 3/8-24 UNF (9.525mm) x 37.1 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$23.59 AUD
$23.59 AUD
Each
3/8-24 UNF (9.525mm)
 37.1
mm 		0.5
N 		1.2
N 		1088430 | PLIT-050-095F-37-C --- Plungers - 3/8-24 UNF (9.525mm) x 37.1 mm x 0.5 N
Material: Steel    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.1 mm   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-050-095F-37-C Plungers - 3/8-24 UNF (9.525mm) x 37.1 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$23.59 AUD
$23.59 AUD
Each
3/8-16 UNC (9.525mm)
 47.0
mm 		0.5
N 		1.2
N 		5.0
mm 		5.1
mm 		1088597 | PLIT-050-095C-47-K-S3 --- Plungers - 3/8-16 UNC (9.525mm) x 47 mm x 0.5 N
Material: Stainless 303 Grade   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-050-095C-47-K-S3 Plungers - 3/8-16 UNC (9.525mm) x 47 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$66.05 AUD
$66.05 AUD
Each
3/8-16 UNC (9.525mm)
 47.0
mm 		0.5
N 		1.2
N 		1088597 | PLIT-050-095C-47-K-S3 --- Plungers - 3/8-16 UNC (9.525mm) x 47 mm x 0.5 N
Material: Stainless 303 Grade    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.1 mm   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-050-095C-47-K-S3 Plungers - 3/8-16 UNC (9.525mm) x 47 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$66.05 AUD
$66.05 AUD
Each
3/8-24 UNF (9.525mm)
 17.0
mm 		0.7
N 		1.6
N 		5.0
mm 		5.1
mm 		1089244 | PLIT-050-095F-21-KSH-C --- Plungers - 3/8-24 UNF (9.525mm) x 17 mm x 0.7 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-050-095F-21-KSH-C Plungers - 3/8-24 UNF (9.525mm) x 17 mm x 0.7 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$45.41 AUD
$45.41 AUD
Each
3/8-24 UNF (9.525mm)
 17.0
mm 		0.7
N 		1.6
N 		1089244 | PLIT-050-095F-21-KSH-C --- Plungers - 3/8-24 UNF (9.525mm) x 17 mm x 0.7 N
Material: Steel    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.1 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-050-095F-21-KSH-C Plungers - 3/8-24 UNF (9.525mm) x 17 mm x 0.7 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$45.41 AUD
$45.41 AUD
Each
3/8-24 UNF (9.525mm)
 17.0
mm 		0.7
N 		1.6
N 		5.0
mm 		5.1
mm 		1089246 | PLIT-050-095F-00-SH-C --- Plungers - 3/8-24 UNF (9.525mm) x 17 mm x 0.7 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-050-095F-00-SH-C Plungers - 3/8-24 UNF (9.525mm) x 17 mm x 0.7 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$45.23 AUD
$45.23 AUD
Each
3/8-24 UNF (9.525mm)
 17.0
mm 		0.7
N 		1.6
N 		1089246 | PLIT-050-095F-00-SH-C --- Plungers - 3/8-24 UNF (9.525mm) x 17 mm x 0.7 N
Material: Steel    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.1 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-050-095F-00-SH-C Plungers - 3/8-24 UNF (9.525mm) x 17 mm x 0.7 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$45.23 AUD
$45.23 AUD
Each
1/2-13 UNC (12.700mm)
 55.9
mm 		0.6
N 		1.4
N 		6.0
mm 		6.1
mm 		1089290 | PLIT-060-127C-56-K-C --- Plungers - 1/2-13 UNC (12.700mm) x 55.9 mm x 0.6 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-060-127C-56-K-C Plungers - 1/2-13 UNC (12.700mm) x 55.9 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$44.68 AUD
$44.68 AUD
Each
1/2-13 UNC (12.700mm)
 55.9
mm 		0.6
N 		1.4
N 		1089290 | PLIT-060-127C-56-K-C --- Plungers - 1/2-13 UNC (12.700mm) x 55.9 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.1 mm   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-060-127C-56-K-C Plungers - 1/2-13 UNC (12.700mm) x 55.9 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$44.68 AUD
$44.68 AUD
Each
M10x1 (10.0mm)
 17.0
mm 		0.6
N 		1.3
N 		5.0
mm 		5.0
mm 		1092588 | PLIT-050-100-100-21-KSH-S3 --- Plungers - M10x1 (10.0mm) x 17 mm x 0.6 N
Material: Stainless   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-050-100-100-21-KSH-S3 Plungers - M10x1 (10.0mm) x 17 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$75.86 AUD
$75.86 AUD
Each
M10x1 (10.0mm)
 17.0
mm 		0.6
N 		1.3
N 		1092588 | PLIT-050-100-100-21-KSH-S3 --- Plungers - M10x1 (10.0mm) x 17 mm x 0.6 N
Material: Stainless    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.0 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-050-100-100-21-KSH-S3 Plungers - M10x1 (10.0mm) x 17 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$75.86 AUD
$75.86 AUD
Each
M10x1 (10.0mm)
 17.0
mm 		0.7
N 		1.6
N 		5.0
mm 		5.0
mm 		1092590 | PLIT-050-100-100-21-KSH-C --- Plungers - M10x1 (10.0mm) x 17 mm x 0.7 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-050-100-100-21-KSH-C Plungers - M10x1 (10.0mm) x 17 mm x 0.7 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$45.95 AUD
$45.95 AUD
Each
M10x1 (10.0mm)
 17.0
mm 		0.7
N 		1.6
N 		1092590 | PLIT-050-100-100-21-KSH-C --- Plungers - M10x1 (10.0mm) x 17 mm x 0.7 N
Material: Steel    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.0 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-050-100-100-21-KSH-C Plungers - M10x1 (10.0mm) x 17 mm x 0.7 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$45.95 AUD
$45.95 AUD
Each
M10x1 (10.0mm)
 22.0
mm 		0.6
N 		1.3
N 		5.0
mm 		5.0
mm 		1093096 | PLIT-050-100-100-21-S3 --- Plungers - M10x1 (10.0mm) x 22 mm x 0.6 N
Material: Stainless   
Category: Plungers - Indexing - Non Locking - Stainless Steel
Part Number: PLIT-050-100-100-21-S3 Plungers - M10x1 (10.0mm) x 22 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$65.95 AUD
$65.95 AUD
Each
M10x1 (10.0mm)
 22.0
mm 		0.6
N 		1.3
N 		1093096 | PLIT-050-100-100-21-S3 --- Plungers - M10x1 (10.0mm) x 22 mm x 0.6 N
Material: Stainless    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.0 mm   
Category: Plungers - Indexing - Non Locking - Stainless Steel
Part Number: PLIT-050-100-100-21-S3 Plungers - M10x1 (10.0mm) x 22 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$65.95 AUD
$65.95 AUD
Each
M10x1 (10.0mm)
 22.0
mm 		0.7
N 		1.6
N 		5.0
mm 		5.0
mm 		1093097 | PLIT-050-100-100-21-C --- Plungers - M10x1 (10.0mm) x 22 mm x 0.7 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - Steel
Part Number: PLIT-050-100-100-21-C Plungers - M10x1 (10.0mm) x 22 mm x 0.7 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$36.14 AUD
$36.14 AUD
Each
M10x1 (10.0mm)
 22.0
mm 		0.7
N 		1.6
N 		1093097 | PLIT-050-100-100-21-C --- Plungers - M10x1 (10.0mm) x 22 mm x 0.7 N
Material: Steel    Tip Diameter (A): 5.0 mm    Nose Length (G): 5.0 mm   
Category: Plungers - Indexing - Non Locking - Steel
Part Number: PLIT-050-100-100-21-C Plungers - M10x1 (10.0mm) x 22 mm x 0.7 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$36.14 AUD
$36.14 AUD
Each
M12.0x1.50 (12.0mm)
 10.0
mm 		0.7
N 		1.9
N 		6.0
mm 		6.0
mm 		Stantuffo di indicizzazione M12x1,5 fine x 10 mm - Non bloccabile con spalla e manopola e blocca filetto in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: Stantuffo di indicizzazione M12x1,5 fine x 10 mm - Non bloccabile con spalla e manopola e blocca filetto in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione M12x1,5 fine x 10 mm - Non bloccabile con spalla e manopola e blocca filetto in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$47.95 AUD
$47.95 AUD
Each
M12.0x1.50 (12.0mm)
 10.0
mm 		0.7
N 		1.9
N 		Stantuffo di indicizzazione M12x1,5 fine x 10 mm - Non bloccabile con spalla e manopola e blocca filetto in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.0 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: Stantuffo di indicizzazione M12x1,5 fine x 10 mm - Non bloccabile con spalla e manopola e blocca filetto in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione M12x1,5 fine x 10 mm - Non bloccabile con spalla e manopola e blocca filetto in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$47.95 AUD
$47.95 AUD
Each
M12.0x1.50 (12.0mm)
 20.0
mm 		0.5
N 		1.1
N 		6.0
mm 		6.0
mm 		1099186 | PLIT-060-120-150-25-KSH-S3 --- Plungers - M12.0x1.50 (12.0mm) x 20 mm x 0.5 N
Material: Stainless   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-060-120-150-25-KSH-S3 Plungers - M12.0x1.50 (12.0mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$86.86 AUD
$86.86 AUD
Each
M12.0x1.50 (12.0mm)
 20.0
mm 		0.5
N 		1.1
N 		1099186 | PLIT-060-120-150-25-KSH-S3 --- Plungers - M12.0x1.50 (12.0mm) x 20 mm x 0.5 N
Material: Stainless    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.0 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-060-120-150-25-KSH-S3 Plungers - M12.0x1.50 (12.0mm) x 20 mm x 0.5 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$86.86 AUD
$86.86 AUD
Each
M12.0x1.50 (12.0mm)
 20.0
mm 		0.7
N 		1.6
N 		6.0
mm 		6.0
mm 		Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla e pomello in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla e pomello in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla e pomello in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$50.86 AUD
$50.86 AUD
Each
M12.0x1.50 (12.0mm)
 20.0
mm 		0.7
N 		1.6
N 		Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla e pomello in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.0 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla e pomello in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla e pomello in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$50.86 AUD
$50.86 AUD
Each
M12.0x1.50 (12.0mm)
 20.0
mm 		0.7
N 		1.6
N 		7.0
mm 		6.0
mm 		Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$47.95 AUD
$47.95 AUD
Each
M12.0x1.50 (12.0mm)
 20.0
mm 		0.7
N 		1.6
N 		Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla in acciaio - indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 7.0 mm    Nose Length (G): 6.0 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla in acciaio - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione M12x1,5 fine x 20 mm - Non bloccabile con spalla in acciaio - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$47.95 AUD
$47.95 AUD
Each
M12.0x1.50 (12.0mm)
 26.0
mm 		0.7
N 		1.6
N 		6.0
mm 		6.0
mm 		Stantuffo di indicizzazione M12x1,5 fine x 26 mm - Acciaio non bloccabile - indicizzazione - MBA (confezione da 1)
Material: Steel   
Category: Plungers - Indexing - Non Locking - Steel
Part Number: Stantuffo di indicizzazione M12x1,5 fine x 26 mm - Acciaio non bloccabile - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione M12x1,5 fine x 26 mm - Acciaio non bloccabile - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$43.59 AUD
$43.59 AUD
Each
M12.0x1.50 (12.0mm)
 26.0
mm 		0.7
N 		1.6
N 		Stantuffo di indicizzazione M12x1,5 fine x 26 mm - Acciaio non bloccabile - indicizzazione - MBA (confezione da 1)
Material: Steel    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.0 mm   
Category: Plungers - Indexing - Non Locking - Steel
Part Number: Stantuffo di indicizzazione M12x1,5 fine x 26 mm - Acciaio non bloccabile - indicizzazione - MBA (confezione da 1) Stantuffo di indicizzazione M12x1,5 fine x 26 mm - Acciaio non bloccabile - indicizzazione - MBA (confezione da 1) / Plungers
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$43.59 AUD
$43.59 AUD
Each
1/2-13 UNC (12.700mm)
 20.1
mm 		0.7
N 		1.6
N 		6.0
mm 		6.1
mm 		1103371 | PLIT-060-127C-25-KSH-C --- Plungers - 1/2-13 UNC (12.700mm) x 20.1 mm x 0.7 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-060-127C-25-KSH-C Plungers - 1/2-13 UNC (12.700mm) x 20.1 mm x 0.7 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$48.86 AUD
$48.86 AUD
Each
1/2-13 UNC (12.700mm)
 20.1
mm 		0.7
N 		1.6
N 		1103371 | PLIT-060-127C-25-KSH-C --- Plungers - 1/2-13 UNC (12.700mm) x 20.1 mm x 0.7 N
Material: Steel    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.1 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-060-127C-25-KSH-C Plungers - 1/2-13 UNC (12.700mm) x 20.1 mm x 0.7 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$48.86 AUD
$48.86 AUD
Each
1/2-13 UNC (12.700mm)
 20.1
mm 		0.7
N 		1.6
N 		6.0
mm 		6.1
mm 		1103372 | PLIT-060-127C-00-SH-C --- Plungers - 1/2-13 UNC (12.700mm) x 20.1 mm x 0.7 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-060-127C-00-SH-C Plungers - 1/2-13 UNC (12.700mm) x 20.1 mm x 0.7 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$51.95 AUD
$51.95 AUD
Each
1/2-13 UNC (12.700mm)
 20.1
mm 		0.7
N 		1.6
N 		1103372 | PLIT-060-127C-00-SH-C --- Plungers - 1/2-13 UNC (12.700mm) x 20.1 mm x 0.7 N
Material: Steel    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.1 mm   
Category: Plungers - Indexing - Non Locking - With Shoulder
Part Number: PLIT-060-127C-00-SH-C Plungers - 1/2-13 UNC (12.700mm) x 20.1 mm x 0.7 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$51.95 AUD
$51.95 AUD
Each
1/2-13 UNC (12.700mm)
 42.9
mm 		0.6
N 		1.4
N 		6.0
mm 		6.1
mm 		1104127 | PLIT-060-127C-43-S3 --- Plungers - 1/2-13 UNC (12.700mm) x 42.9 mm x 0.6 N
Material: Stainless 303 Grade   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-060-127C-43-S3 Plungers - 1/2-13 UNC (12.700mm) x 42.9 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$74.32 AUD
$74.32 AUD
Each
1/2-13 UNC (12.700mm)
 42.9
mm 		0.6
N 		1.4
N 		1104127 | PLIT-060-127C-43-S3 --- Plungers - 1/2-13 UNC (12.700mm) x 42.9 mm x 0.6 N
Material: Stainless 303 Grade    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.1 mm   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-060-127C-43-S3 Plungers - 1/2-13 UNC (12.700mm) x 42.9 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$74.32 AUD
$74.32 AUD
Each
1/2-13 UNC (12.700mm)
 42.9
mm 		0.6
N 		1.4
N 		6.0
mm 		6.1
mm 		1104128 | PLIT-060-127C-43-C --- Plungers - 1/2-13 UNC (12.700mm) x 42.9 mm x 0.6 N
Material: Steel   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-060-127C-43-C Plungers - 1/2-13 UNC (12.700mm) x 42.9 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$42.95 AUD
$42.95 AUD
Each
1/2-13 UNC (12.700mm)
 42.9
mm 		0.6
N 		1.4
N 		1104128 | PLIT-060-127C-43-C --- Plungers - 1/2-13 UNC (12.700mm) x 42.9 mm x 0.6 N
Material: Steel    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.1 mm   
Category: Plungers - Indexing - Non Locking - Without Knob
Part Number: PLIT-060-127C-43-C Plungers - 1/2-13 UNC (12.700mm) x 42.9 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$42.95 AUD
$42.95 AUD
Each
1/2-13 UNC (12.700mm)
 55.9
mm 		0.6
N 		1.4
N 		6.0
mm 		6.1
mm 		1104377 | PLIT-060-127C-56-K-S3 --- Plungers - 1/2-13 UNC (12.700mm) x 55.9 mm x 0.6 N
Material: Stainless 303 Grade   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-060-127C-56-K-S3 Plungers - 1/2-13 UNC (12.700mm) x 55.9 mm x 0.6 N
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Dec 21, 2024
$74.59 AUD
$74.59 AUD
Each
1/2-13 UNC (12.700mm)
 55.9
mm 		0.6
N 		1.4
N 		1104377 | PLIT-060-127C-56-K-S3 --- Plungers - 1/2-13 UNC (12.700mm) x 55.9 mm x 0.6 N
Material: Stainless 303 Grade    Tip Diameter (A): 6.0 mm    Nose Length (G): 6.1 mm   
Category: Plungers - Indexing - Non Locking - With Knob
Part Number: PLIT-060-127C-56-K-S3 Plungers - 1/2-13 UNC (12.700mm) x 55.9 mm x 0.6 N
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Dec 21, 2024
$74.59 AUD
$74.59 AUD
Each