Pins - Hammer Drive - Flat Head

23 Products in this selection
  • Used to replace screws where the need to remove the pin is unlikely.
  • Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin.
  • Simple, low cost assembly for use in mild steel, aluminium, brass or plastics.
  • Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly.
  • Drive studs do not require lock washers to prevent back-out.
  • Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
Additional resources:
Master Pins Catalogue PDF
Min Hole Dia (d1) Approx. Length (L) Max Hole Dia. Approx Pin Diameter (d2) Max Head Diameter (d3) Max Head Thickness (T) Indicative
Image
1.40
mm 		5.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (1000 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
Min Hole Dia (d1) Approx. Length (L) Max Hole Dia. Approx Pin Diameter (d2) Indicative
Image
1.40
mm 		5.0
mm 		1.46
mm 		1.63
mm 		Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (1000 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		6.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (1000 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		6.0
mm 		1.46
mm 		1.63
mm 		Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (1000 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		8.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
239 units (1195 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$3.41 AUD
$3.41 AUD
Per 5
1.40
mm 		8.0
mm 		1.46
mm 		1.63
mm 		Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
239 units (1195 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$3.41 AUD
$3.41 AUD
Per 5
View the product page first if you are unsure.
1.60
mm 		5.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
40 units (800 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		5.0
mm 		1.66
mm 		1.83
mm 		Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
40 units (800 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		6.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50) Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50) / Pins
40 units (4000 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.19 AUD
$9.29 AUD $6.19 AUD
Per 100
1.60
mm 		6.0
mm 		1.66
mm 		1.83
mm 		Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50)
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50) Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50) / Pins
40 units (4000 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.19 AUD
$9.29 AUD $6.19 AUD
Per 100
1.60
mm 		8.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
54 units (1080 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		8.0
mm 		1.66
mm 		1.83
mm 		Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
54 units (1080 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		6.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041011 | HDP020-06F (5 Pcs) --- Hammer Drive Pins - 2 mm x 6 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-06F (5 Pcs) Hammer Drive Pins - 2 mm x 6 mm x 2.06 mm
3160 units (15800 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$14.14 AUD
$14.14 AUD
Per 5
2.00
mm 		6.0
mm 		2.06
mm 		2.30
mm 		1041011 | HDP020-06F (5 Pcs) --- Hammer Drive Pins - 2 mm x 6 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-06F (5 Pcs) Hammer Drive Pins - 2 mm x 6 mm x 2.06 mm
3160 units (15800 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$14.14 AUD
$14.14 AUD
Per 5
View the product page first if you are unsure.
2.00
mm 		8.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041202 | HDP020-08F (20 Pcs) --- Hammer Drive Pins - 2 mm x 8 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-08F (20 Pcs) Hammer Drive Pins - 2 mm x 8 mm x 2.06 mm
38 units (760 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		8.0
mm 		2.06
mm 		2.30
mm 		1041202 | HDP020-08F (20 Pcs) --- Hammer Drive Pins - 2 mm x 8 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-08F (20 Pcs) Hammer Drive Pins - 2 mm x 8 mm x 2.06 mm
38 units (760 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		10.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041270 | HDP020-10F (20 Pcs) --- Hammer Drive Pins - 2 mm x 10 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-10F (20 Pcs) Hammer Drive Pins - 2 mm x 10 mm x 2.06 mm
49 units (980 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.41 AUD
$9.61 AUD $6.41 AUD
Per 20
2.00
mm 		10.0
mm 		2.06
mm 		2.30
mm 		1041270 | HDP020-10F (20 Pcs) --- Hammer Drive Pins - 2 mm x 10 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-10F (20 Pcs) Hammer Drive Pins - 2 mm x 10 mm x 2.06 mm
49 units (980 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.41 AUD
$9.61 AUD $6.41 AUD
Per 20
2.50
mm 		6.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043587 | HDP025-06F (20 Pcs) --- Hammer Drive Pins - 2.5 mm x 6 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-06F (20 Pcs) Hammer Drive Pins - 2.5 mm x 6 mm x 2.56 mm
425 units (8500 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.09 AUD
$10.64 AUD $7.09 AUD
Per 20
2.50
mm 		6.0
mm 		2.56
mm 		2.80
mm 		1043587 | HDP025-06F (20 Pcs) --- Hammer Drive Pins - 2.5 mm x 6 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-06F (20 Pcs) Hammer Drive Pins - 2.5 mm x 6 mm x 2.56 mm
425 units (8500 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.09 AUD
$10.64 AUD $7.09 AUD
Per 20
2.50
mm 		8.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043725 | HDP025-08F (5 Pcs) --- Hammer Drive Pins - 2.5 mm x 8 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-08F (5 Pcs) Hammer Drive Pins - 2.5 mm x 8 mm x 2.56 mm
1202 units (6010 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$3.68 AUD
$3.68 AUD
Per 5
2.50
mm 		8.0
mm 		2.56
mm 		2.80
mm 		1043725 | HDP025-08F (5 Pcs) --- Hammer Drive Pins - 2.5 mm x 8 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-08F (5 Pcs) Hammer Drive Pins - 2.5 mm x 8 mm x 2.56 mm
1202 units (6010 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$3.68 AUD
$3.68 AUD
Per 5
View the product page first if you are unsure.
2.50
mm 		10.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043826 | HDP025-10F (20 Pcs) --- Hammer Drive Pins - 2.5 mm x 10 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-10F (20 Pcs) Hammer Drive Pins - 2.5 mm x 10 mm x 2.56 mm
50 units (1000 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.49 AUD
$9.74 AUD $6.49 AUD
Per 20
2.50
mm 		10.0
mm 		2.56
mm 		2.80
mm 		1043826 | HDP025-10F (20 Pcs) --- Hammer Drive Pins - 2.5 mm x 10 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-10F (20 Pcs) Hammer Drive Pins - 2.5 mm x 10 mm x 2.56 mm
50 units (1000 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.49 AUD
$9.74 AUD $6.49 AUD
Per 20
3.00
mm 		8.0
mm 		3.06
mm 		3.35
mm 		5.45
mm 		1.20
mm 		1046583 | HDP030-08F (10 Pcs) --- Hammer Drive Pins - 3 mm x 8 mm x 3.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-08F (10 Pcs) Hammer Drive Pins - 3 mm x 8 mm x 3.06 mm
106 units (1060 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.86 AUD
$5.80 AUD $3.86 AUD
Per 10
3.00
mm 		8.0
mm 		3.06
mm 		3.35
mm 		1046583 | HDP030-08F (10 Pcs) --- Hammer Drive Pins - 3 mm x 8 mm x 3.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-08F (10 Pcs) Hammer Drive Pins - 3 mm x 8 mm x 3.06 mm
106 units (1060 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.86 AUD
$5.80 AUD $3.86 AUD
Per 10
3.00
mm 		10.0
mm 		3.06
mm 		3.35
mm 		5.45
mm 		1.20
mm 		1046867 | HDP030-10F (10 Pcs) --- Hammer Drive Pins - 3 mm x 10 mm x 3.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-10F (10 Pcs) Hammer Drive Pins - 3 mm x 10 mm x 3.06 mm
252 units (2520 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.79 AUD
$5.69 AUD $3.79 AUD
Per 10
3.00
mm 		10.0
mm 		3.06
mm 		3.35
mm 		1046867 | HDP030-10F (10 Pcs) --- Hammer Drive Pins - 3 mm x 10 mm x 3.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-10F (10 Pcs) Hammer Drive Pins - 3 mm x 10 mm x 3.06 mm
252 units (2520 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.79 AUD
$5.69 AUD $3.79 AUD
Per 10
3.00
mm 		12.0
mm 		3.06
mm 		3.35
mm 		5.45
mm 		1.20
mm 		1047083 | HDP030-12F (20 Pcs) --- Hammer Drive Pins - 3 mm x 12 mm x 3.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-12F (20 Pcs) Hammer Drive Pins - 3 mm x 12 mm x 3.06 mm
45 units (900 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.56 AUD
$9.85 AUD $6.56 AUD
Per 20
3.00
mm 		12.0
mm 		3.06
mm 		3.35
mm 		1047083 | HDP030-12F (20 Pcs) --- Hammer Drive Pins - 3 mm x 12 mm x 3.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-12F (20 Pcs) Hammer Drive Pins - 3 mm x 12 mm x 3.06 mm
45 units (900 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.56 AUD
$9.85 AUD $6.56 AUD
Per 20
4.00
mm 		10.0
mm 		4.08
mm 		4.35
mm 		7.25
mm 		1.50
mm 		Perno di azionamento del martello 4 x 10 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 4 x 10 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 4 x 10 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (500 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.71 AUD
$5.56 AUD $3.71 AUD
Per 10
4.00
mm 		10.0
mm 		4.08
mm 		4.35
mm 		Perno di azionamento del martello 4 x 10 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 4 x 10 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 4 x 10 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (500 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.71 AUD
$5.56 AUD $3.71 AUD
Per 10
4.00
mm 		12.0
mm 		4.08
mm 		4.35
mm 		7.25
mm 		1.50
mm 		Perno di azionamento del martello 4 x 12 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 4 x 12 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 4 x 12 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
52 units (520 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.79 AUD
$5.69 AUD $3.79 AUD
Per 10
4.00
mm 		12.0
mm 		4.08
mm 		4.35
mm 		Perno di azionamento del martello 4 x 12 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 4 x 12 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 4 x 12 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
52 units (520 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.79 AUD
$5.69 AUD $3.79 AUD
Per 10
4.00
mm 		16.0
mm 		4.08
mm 		4.35
mm 		7.25
mm 		1.50
mm 		Perno di azionamento del martello 4 x 16 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 4 x 16 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 4 x 16 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
112 units (560 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$3.86 AUD
$3.86 AUD
Per 5
4.00
mm 		16.0
mm 		4.08
mm 		4.35
mm 		Perno di azionamento del martello 4 x 16 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 4 x 16 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 4 x 16 x 4,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
112 units (560 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$3.86 AUD
$3.86 AUD
Per 5
View the product page first if you are unsure.
5.00
mm 		12.0
mm 		5.08
mm 		5.35
mm 		9.10
mm 		1.80
mm 		1063210 | HDP050-12F (5 Pcs) --- Hammer Drive Pins - 5 mm x 12 mm x 5.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-12F (5 Pcs) Hammer Drive Pins - 5 mm x 12 mm x 5.08 mm
200 units (1000 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$4.86 AUD
$4.86 AUD
Per 5
5.00
mm 		12.0
mm 		5.08
mm 		5.35
mm 		1063210 | HDP050-12F (5 Pcs) --- Hammer Drive Pins - 5 mm x 12 mm x 5.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-12F (5 Pcs) Hammer Drive Pins - 5 mm x 12 mm x 5.08 mm
200 units (1000 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$4.86 AUD
$4.86 AUD
Per 5
View the product page first if you are unsure.
5.00
mm 		16.0
mm 		5.08
mm 		5.35
mm 		9.10
mm 		1.80
mm 		1063753 | HDP050-16F (10 Pcs) --- Hammer Drive Pins - 5 mm x 16 mm x 5.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-16F (10 Pcs) Hammer Drive Pins - 5 mm x 16 mm x 5.08 mm
53 units (530 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.94 AUD
$5.90 AUD $3.94 AUD
Per 10
5.00
mm 		16.0
mm 		5.08
mm 		5.35
mm 		1063753 | HDP050-16F (10 Pcs) --- Hammer Drive Pins - 5 mm x 16 mm x 5.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-16F (10 Pcs) Hammer Drive Pins - 5 mm x 16 mm x 5.08 mm
53 units (530 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.94 AUD
$5.90 AUD $3.94 AUD
Per 10
5.00
mm 		20.0
mm 		5.08
mm 		5.35
mm 		9.10
mm 		1.80
mm 		1064078 | HDP050-20F (10 Pcs) --- Hammer Drive Pins - 5 mm x 20 mm x 5.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-20F (10 Pcs) Hammer Drive Pins - 5 mm x 20 mm x 5.08 mm
91 units (910 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.86 AUD
$5.80 AUD $3.86 AUD
Per 10
5.00
mm 		20.0
mm 		5.08
mm 		5.35
mm 		1064078 | HDP050-20F (10 Pcs) --- Hammer Drive Pins - 5 mm x 20 mm x 5.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-20F (10 Pcs) Hammer Drive Pins - 5 mm x 20 mm x 5.08 mm
91 units (910 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.86 AUD
$5.80 AUD $3.86 AUD
Per 10
6.00
mm 		16.0
mm 		6.08
mm 		6.35
mm 		10.80
mm 		2.20
mm 		Perno di azionamento del martello 6 x 16 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 6 x 16 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 6 x 16 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
495 units (2475 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$4.68 AUD
$4.68 AUD
Per 5
6.00
mm 		16.0
mm 		6.08
mm 		6.35
mm 		Perno di azionamento del martello 6 x 16 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 10.80 mm    Max Head Thickness (T): 2.20 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 6 x 16 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 6 x 16 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
495 units (2475 pcs) Available Immediately | Further orders can be expected around Sat, May 10, 2025
$4.68 AUD
$4.68 AUD
Per 5
View the product page first if you are unsure.
6.00
mm 		20.0
mm 		6.08
mm 		6.35
mm 		10.80
mm 		2.20
mm 		Perno di azionamento del martello 6 x 20 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 6 x 20 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 6 x 20 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (500 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.39 AUD
$6.59 AUD $4.39 AUD
Per 10
6.00
mm 		20.0
mm 		6.08
mm 		6.35
mm 		Perno di azionamento del martello 6 x 20 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 10.80 mm    Max Head Thickness (T): 2.20 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: Perno di azionamento del martello 6 x 20 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 6 x 20 x 6,08 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (500 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.39 AUD
$6.59 AUD $4.39 AUD
Per 10