Pins - Dowel - Extractable - Carbon Steel

Pins - Dowel Pins - Dowel - Extractable   Pins - Dowel - Extractable - Carbon Steel
33 Products In this Selection
Hardened and Ground Steel 100 Cr6. Din 7979.
Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes.
An air release flat is ground along the full length of the pin to overcome the problem of pressure build up by trapped air.
Hardness 55-62 HRC, HV550-650
Extractable pins may or may not have a flat to vent pressure when pulling
Also known as parallel pins
Diameter (D) Length (L) Overall Length Type Indicative
Image
6.000
mm
+0.006/+0.015 		30.00
mm
+/-0.500 		30.00
mm
+/-0.500 		1 (See diagram)
 1069659 | DP060-030-CH-1E --- Pins - 6 mm x 30 mm x 30 mm
Material: Carbon Steel Rc 58-62    Thread Size: M4   
Part Number: DP060-030-CH-1E Pins - 6 mm x 30 mm x 30 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$6.14 AUD
$6.14 AUD
Per Each
Diameter (D) Length (L) Overall Length Indicative
Image
6.000
mm
+0.006/+0.015 		30.00
mm
+/-0.500 		30.00
mm
+/-0.500 		1069659 | DP060-030-CH-1E --- Pins - 6 mm x 30 mm x 30 mm
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: M4   
Part Number: DP060-030-CH-1E Pins - 6 mm x 30 mm x 30 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$6.14 AUD
$6.14 AUD
Per Each
6.350
mm
+0.006/+0.015 		12.70
mm
+/-0.350 		12.70
mm
+/-0.350 		1 (See diagram)
 Grano 6,35 x 12,7 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5)
Material: Carbon Steel Rc 58-62    Thread Size: 8-32   
Part Number: Grano 6,35 x 12,7 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) Grano 6,35 x 12,7 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$31.41 AUD
$31.41 AUD
Per 5
6.350
mm
+0.006/+0.015 		12.70
mm
+/-0.350 		12.70
mm
+/-0.350 		Grano 6,35 x 12,7 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 8-32   
Part Number: Grano 6,35 x 12,7 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) Grano 6,35 x 12,7 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$31.41 AUD
$31.41 AUD
Per 5
6.350
mm
+0.006/+0.015 		19.05
mm
+/-0.420 		19.05
mm
+/-0.420 		1 (See diagram)
 Grano 6,35 x 19,05 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5)
Material: Carbon Steel Rc 58-62    Thread Size: 8-32   
Part Number: Grano 6,35 x 19,05 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) Grano 6,35 x 19,05 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$10.32 AUD
$10.32 AUD
Per 5
6.350
mm
+0.006/+0.015 		19.05
mm
+/-0.420 		19.05
mm
+/-0.420 		Grano 6,35 x 19,05 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 8-32   
Part Number: Grano 6,35 x 19,05 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) Grano 6,35 x 19,05 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$10.32 AUD
$10.32 AUD
Per 5
6.350
mm
+0.006/+0.015 		25.40
mm
+/-0.420 		25.40
mm
+/-0.420 		1 (See diagram)
 Grano 6,35 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5)
Material: Carbon Steel Rc 58-62    Thread Size: 8-32   
Part Number: Grano 6,35 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) Grano 6,35 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$12.23 AUD
$12.23 AUD
Per 5
6.350
mm
+0.006/+0.015 		25.40
mm
+/-0.420 		25.40
mm
+/-0.420 		Grano 6,35 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 8-32   
Part Number: Grano 6,35 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) Grano 6,35 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 5) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$12.23 AUD
$12.23 AUD
Per 5
6.350
mm
+0.006/+0.015 		31.75
mm
+/-0.500 		31.75
mm
+/-0.500 		1 (See diagram)
 1074577 | DP064-032-CH-1E (5 Pcs) --- Pins - 6.35 mm x 31.75 mm x 31.75 mm
Material: Carbon Steel Rc 58-62    Thread Size: 8-32   
Part Number: DP064-032-CH-1E (5 Pcs) Pins - 6.35 mm x 31.75 mm x 31.75 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$15.41 AUD
$15.41 AUD
Per 5
6.350
mm
+0.006/+0.015 		31.75
mm
+/-0.500 		31.75
mm
+/-0.500 		1074577 | DP064-032-CH-1E (5 Pcs) --- Pins - 6.35 mm x 31.75 mm x 31.75 mm
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 8-32   
Part Number: DP064-032-CH-1E (5 Pcs) Pins - 6.35 mm x 31.75 mm x 31.75 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$15.41 AUD
$15.41 AUD
Per 5
6.350
mm
+0.006/+0.015 		38.10
mm
+/-0.500 		38.10
mm
+/-0.500 		1 (See diagram)
 1074814 | DP064-038-CH-1E --- Pins - 6.35 mm x 38.1 mm x 38.1 mm
Material: Carbon Steel Rc 58-62    Thread Size: 8-32   
Part Number: DP064-038-CH-1E Pins - 6.35 mm x 38.1 mm x 38.1 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$6.32 AUD
$6.32 AUD
Per Each
6.350
mm
+0.006/+0.015 		38.10
mm
+/-0.500 		38.10
mm
+/-0.500 		1074814 | DP064-038-CH-1E --- Pins - 6.35 mm x 38.1 mm x 38.1 mm
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 8-32   
Part Number: DP064-038-CH-1E Pins - 6.35 mm x 38.1 mm x 38.1 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$6.32 AUD
$6.32 AUD
Per Each
6.350
mm
+0.006/+0.015 		50.80
mm
+/-0.600 		50.80
mm
+/-0.600 		1 (See diagram)
 1075074 | DP064-051-CH-1E (5 Pcs) --- Pins - 6.35 mm x 50.8 mm x 50.8 mm
Material: Carbon Steel Rc 58-62    Thread Size: 8-32   
Part Number: DP064-051-CH-1E (5 Pcs) Pins - 6.35 mm x 50.8 mm x 50.8 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$17.68 AUD
$17.68 AUD
Per 5
6.350
mm
+0.006/+0.015 		50.80
mm
+/-0.600 		50.80
mm
+/-0.600 		1075074 | DP064-051-CH-1E (5 Pcs) --- Pins - 6.35 mm x 50.8 mm x 50.8 mm
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 8-32   
Part Number: DP064-051-CH-1E (5 Pcs) Pins - 6.35 mm x 50.8 mm x 50.8 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$17.68 AUD
$17.68 AUD
Per 5
6.350
mm
+0.006/+0.015 		63.50
mm
+/-0.600 		63.50
mm
+/-0.600 		1 (See diagram)
 1075220 | DP064-064-CH-1E (5 Pcs) --- Pins - 6.35 mm x 63.5 mm x 63.5 mm
Material: Carbon Steel Rc 58-62    Thread Size: 8-32   
Part Number: DP064-064-CH-1E (5 Pcs) Pins - 6.35 mm x 63.5 mm x 63.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$17.68 AUD
$17.68 AUD
Per 5
6.350
mm
+0.006/+0.015 		63.50
mm
+/-0.600 		63.50
mm
+/-0.600 		1075220 | DP064-064-CH-1E (5 Pcs) --- Pins - 6.35 mm x 63.5 mm x 63.5 mm
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 8-32   
Part Number: DP064-064-CH-1E (5 Pcs) Pins - 6.35 mm x 63.5 mm x 63.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$17.68 AUD
$17.68 AUD
Per 5
7.938
mm
+0.006/+0.015 		31.75
mm
+/-0.500 		31.75
mm
+/-0.500 		1 (See diagram)
 1079090 | DP079-032-CH-1E (5 Pcs) --- Pins - 7.938 mm x 31.75 mm x 31.75 mm
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: DP079-032-CH-1E (5 Pcs) Pins - 7.938 mm x 31.75 mm x 31.75 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Thu, Nov 28, 2024
$26.50 AUD
$26.50 AUD
Per 5
7.938
mm
+0.006/+0.015 		31.75
mm
+/-0.500 		31.75
mm
+/-0.500 		1079090 | DP079-032-CH-1E (5 Pcs) --- Pins - 7.938 mm x 31.75 mm x 31.75 mm
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: DP079-032-CH-1E (5 Pcs) Pins - 7.938 mm x 31.75 mm x 31.75 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Thu, Nov 28, 2024
$26.50 AUD
$26.50 AUD
Per 5
7.938
mm
+0.006/+0.015 		38.10
mm
+/-0.500 		38.10
mm
+/-0.500 		1 (See diagram)
 1079194 | DP079-038-CH-1E (5 Pcs) --- Pins - 7.938 mm x 38.1 mm x 38.1 mm
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: DP079-038-CH-1E (5 Pcs) Pins - 7.938 mm x 38.1 mm x 38.1 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Nov 16, 2024
$20.32 AUD
$20.32 AUD
Per 5
7.938
mm
+0.006/+0.015 		38.10
mm
+/-0.500 		38.10
mm
+/-0.500 		1079194 | DP079-038-CH-1E (5 Pcs) --- Pins - 7.938 mm x 38.1 mm x 38.1 mm
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: DP079-038-CH-1E (5 Pcs) Pins - 7.938 mm x 38.1 mm x 38.1 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Nov 16, 2024
$20.32 AUD
$20.32 AUD
Per 5
9.525
mm
+0.006/+0.015 		25.40
mm
+/-0.420 		25.40
mm
+/-0.420 		1 (See diagram)
 Grano 9.525 x 25.4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: Grano 9.525 x 25.4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 9.525 x 25.4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Nov 16, 2024
$7.05 AUD
$7.05 AUD
Per Each
9.525
mm
+0.006/+0.015 		25.40
mm
+/-0.420 		25.40
mm
+/-0.420 		Grano 9.525 x 25.4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: Grano 9.525 x 25.4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 9.525 x 25.4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Nov 16, 2024
$7.05 AUD
$7.05 AUD
Per Each
9.525
mm
+0.006/+0.015 		31.75
mm
+/-0.500 		31.75
mm
+/-0.500 		1 (See diagram)
 Grano 9,525 x 31,75 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5)
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: Grano 9,525 x 31,75 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) Grano 9,525 x 31,75 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Nov 16, 2024
$15.59 AUD
$15.59 AUD
Per 5
9.525
mm
+0.006/+0.015 		31.75
mm
+/-0.500 		31.75
mm
+/-0.500 		Grano 9,525 x 31,75 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: Grano 9,525 x 31,75 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) Grano 9,525 x 31,75 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Nov 16, 2024
$15.59 AUD
$15.59 AUD
Per 5
9.525
mm
+0.006/+0.015 		38.10
mm
+/-0.500 		38.10
mm
+/-0.500 		1 (See diagram)
 Grano 9.525 x 38.1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5)
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: Grano 9.525 x 38.1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) Grano 9.525 x 38.1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Nov 16, 2024
$22.23 AUD
$22.23 AUD
Per 5
9.525
mm
+0.006/+0.015 		38.10
mm
+/-0.500 		38.10
mm
+/-0.500 		Grano 9.525 x 38.1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: Grano 9.525 x 38.1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) Grano 9.525 x 38.1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Nov 16, 2024
$22.23 AUD
$22.23 AUD
Per 5
9.525
mm
+0.006/+0.015 		44.45
mm
+/-0.500 		44.45
mm
+/-0.500 		1 (See diagram)
 Grano 9,525 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: Grano 9,525 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 9,525 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Nov 16, 2024
$5.23 AUD
$5.23 AUD
Per Each
9.525
mm
+0.006/+0.015 		44.45
mm
+/-0.500 		44.45
mm
+/-0.500 		Grano 9,525 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: Grano 9,525 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 9,525 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Nov 16, 2024
$5.23 AUD
$5.23 AUD
Per Each
9.525
mm
+0.006/+0.015 		50.80
mm
+/-0.600 		50.80
mm
+/-0.600 		1 (See diagram)
 Grano 9.525 x 50.8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: Grano 9.525 x 50.8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 9.525 x 50.8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Nov 16, 2024
$5.41 AUD
$5.41 AUD
Per Each
9.525
mm
+0.006/+0.015 		50.80
mm
+/-0.600 		50.80
mm
+/-0.600 		Grano 9.525 x 50.8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: Grano 9.525 x 50.8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 9.525 x 50.8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Nov 16, 2024
$5.41 AUD
$5.41 AUD
Per Each
9.525
mm
+0.006/+0.015 		63.50
mm
+/-0.600 		63.50
mm
+/-0.600 		1 (See diagram)
 Grano 9.525 x 63.5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: Grano 9.525 x 63.5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 9.525 x 63.5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
10 Available
| Backorders for more can be expected around Sat, Nov 16, 2024
$4.68 AUD
$4.68 AUD
Per Each
9.525
mm
+0.006/+0.015 		63.50
mm
+/-0.600 		63.50
mm
+/-0.600 		Grano 9.525 x 63.5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: Grano 9.525 x 63.5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 9.525 x 63.5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
10 Available
| | Backorders for more can be expected around Sat, Nov 16, 2024
$4.68 AUD
$4.68 AUD
Per Each
9.525
mm
+0.006/+0.015 		76.20
mm
+/-0.600 		76.20
mm
+/-0.600 		1 (See diagram)
 Grano di Spina 9.525 x 76.2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5)
Material: Carbon Steel Rc 58-62    Thread Size: 10-32   
Part Number: Grano di Spina 9.525 x 76.2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) Grano di Spina 9.525 x 76.2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Nov 16, 2024
$20.50 AUD
$20.50 AUD
Per 5
9.525
mm
+0.006/+0.015 		76.20
mm
+/-0.600 		76.20
mm
+/-0.600 		Grano di Spina 9.525 x 76.2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 10-32   
Part Number: Grano di Spina 9.525 x 76.2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) Grano di Spina 9.525 x 76.2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 5) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Nov 16, 2024
$20.50 AUD
$20.50 AUD
Per 5
11.113
mm
+0.007/+0.018 		50.80
mm
+/-0.600 		50.80
mm
+/-0.600 		1 (See diagram)
 Grano 11.113 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 1/4-20   
Part Number: Grano 11.113 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 11.113 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$6.41 AUD
$6.41 AUD
Per Each
11.113
mm
+0.007/+0.018 		50.80
mm
+/-0.600 		50.80
mm
+/-0.600 		Grano 11.113 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 1/4-20   
Part Number: Grano 11.113 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 11.113 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$6.41 AUD
$6.41 AUD
Per Each
12.700
mm
+0.007/+0.018 		25.40
mm
+/-0.420 		25.40
mm
+/-0.420 		1 (See diagram)
 Grano 12,7 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 12,7 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$5.68 AUD
$5.68 AUD
Per Each
12.700
mm
+0.007/+0.018 		25.40
mm
+/-0.420 		25.40
mm
+/-0.420 		Grano 12,7 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 12,7 x 25,4 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$5.68 AUD
$5.68 AUD
Per Each
12.700
mm
+0.007/+0.018 		38.10
mm
+/-0.500 		38.10
mm
+/-0.500 		1 (See diagram)
 Grano 12,7 x 38,1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20)
Material: Carbon Steel Rc 58-62    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 38,1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20) Grano 12,7 x 38,1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$91.50 AUD
$91.50 AUD
Per 20
12.700
mm
+0.007/+0.018 		38.10
mm
+/-0.500 		38.10
mm
+/-0.500 		Grano 12,7 x 38,1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 38,1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20) Grano 12,7 x 38,1 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$91.50 AUD
$91.50 AUD
Per 20
12.700
mm
+0.007/+0.018 		44.45
mm
+/-0.500 		44.45
mm
+/-0.500 		1 (See diagram)
 Grano 12,7 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 12,7 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
8 Available
| Backorders for more can be expected around Thu, Nov 28, 2024
$11.77 AUD
$11.77 AUD
Per Each
12.700
mm
+0.007/+0.018 		44.45
mm
+/-0.500 		44.45
mm
+/-0.500 		Grano 12,7 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 12,7 x 44,45 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
8 Available
| | Backorders for more can be expected around Thu, Nov 28, 2024
$11.77 AUD
$11.77 AUD
Per Each
12.700
mm
+0.007/+0.018 		50.80
mm
+/-0.600 		50.80
mm
+/-0.600 		1 (See diagram)
 Grano 12,7 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20)
Material: Carbon Steel Rc 58-62    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20) Grano 12,7 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$116.68 AUD
$116.68 AUD
Per 20
12.700
mm
+0.007/+0.018 		50.80
mm
+/-0.600 		50.80
mm
+/-0.600 		Grano 12,7 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20) Grano 12,7 x 50,8 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (confezione da 20) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$116.68 AUD
$116.68 AUD
Per 20
12.700
mm
+0.007/+0.018 		63.50
mm
+/-0.600 		63.50
mm
+/-0.600 		1 (See diagram)
 Grano 12,7 x 63,5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 63,5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 12,7 x 63,5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$6.77 AUD
$6.77 AUD
Per Each
12.700
mm
+0.007/+0.018 		63.50
mm
+/-0.600 		63.50
mm
+/-0.600 		Grano 12,7 x 63,5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 63,5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 12,7 x 63,5 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$6.77 AUD
$6.77 AUD
Per Each
12.700
mm
+0.007/+0.018 		76.20
mm
+/-0.600 		76.20
mm
+/-0.600 		1 (See diagram)
 Grano 12,7 x 76,2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 76,2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 12,7 x 76,2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Dec 23, 2024
$9.41 AUD
$9.41 AUD
Per Each
12.700
mm
+0.007/+0.018 		76.20
mm
+/-0.600 		76.20
mm
+/-0.600 		Grano 12,7 x 76,2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1)
Material: Carbon Steel Rc 58-62    Type: 1 (See diagram)    Thread Size: 1/4-20   
Part Number: Grano 12,7 x 76,2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) Grano 12,7 x 76,2 mm - Acciaio al Carbonio Estraibile - Din 7979 - NoCor (Confezione da 1) / Pins
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Dec 23, 2024
$9.41 AUD
$9.41 AUD
Per Each