Gears - Spur - Standard - Module 0.4

23 Products in this selection

This is a combined category of products from Module 0.4 Standard Spur Gears. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Module 0.4 Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
8
Nr. 		3.20
mm 		1.500
mm 		4.000
mm 		4.000
mm 		Module 0.4
 Ingranaggio cilindrico 8 x 3,20 x 1,500 - Modulo 0,4 Ottone - MBA (Confezione da 20)
Material: Brass    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Brass
Part Number: Ingranaggio cilindrico 8 x 3,20 x 1,500 - Modulo 0,4 Ottone - MBA (Confezione da 20) Ingranaggio cilindrico 8 x 3,20 x 1,500 - Modulo 0,4 Ottone - MBA (Confezione da 20) / Gears
83 units (830 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 10
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
8
Nr. 		3.20
mm 		1.500
mm 		4.000
mm 		Ingranaggio cilindrico 8 x 3,20 x 1,500 - Modulo 0,4 Ottone - MBA (Confezione da 20)
Material: Brass    Face Width (FW): 4.000 mm    Pitch: Module 0.4    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Brass
Part Number: Ingranaggio cilindrico 8 x 3,20 x 1,500 - Modulo 0,4 Ottone - MBA (Confezione da 20) Ingranaggio cilindrico 8 x 3,20 x 1,500 - Modulo 0,4 Ottone - MBA (Confezione da 20) / Gears
83 units (830 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 10
15
Nr. 		6.00
mm 		3.000
mm 		6.800
mm 		5.000
mm 		Module 0.4
 1108626 | G006B-15-M04-050-030-A-P (10 Pcs) --- Gears - 15 Teeth x 6 mm x 3 mm
Material: Acetal - No Insert    Hub Diameter (D1): 5.50 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G006B-15-M04-050-030-A-P (10 Pcs) Gears - 15 Teeth x 6 mm x 3 mm
1 pack (10 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$9.00 AUD
$14.85 AUD $9.00 AUD
Per 10
15
Nr. 		6.00
mm 		3.000
mm 		6.800
mm 		1108626 | G006B-15-M04-050-030-A-P (10 Pcs) --- Gears - 15 Teeth x 6 mm x 3 mm
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 5.50 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G006B-15-M04-050-030-A-P (10 Pcs) Gears - 15 Teeth x 6 mm x 3 mm
1 pack (10 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$9.00 AUD
$14.85 AUD $9.00 AUD
Per 10
36
Nr. 		14.40
mm 		5.000
mm 		15.200
mm 		3.000
mm 		Module 0.4
 1149316 | G014B-36-M04-030-050-AB-G --- Gears - 36 Teeth x 14.4 mm x 5 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G014B-36-M04-030-050-AB-G Gears - 36 Teeth x 14.4 mm x 5 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$3.30 AUD $2.00 AUD
Each
36
Nr. 		14.40
mm 		5.000
mm 		15.200
mm 		1149316 | G014B-36-M04-030-050-AB-G --- Gears - 36 Teeth x 14.4 mm x 5 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G014B-36-M04-030-050-AB-G Gears - 36 Teeth x 14.4 mm x 5 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$3.30 AUD $2.00 AUD
Each
40
Nr. 		16.00
mm 		3.000
mm 		16.800
mm 		3.000
mm 		Module 0.4
 1153173 | G016B-40-M04-030-030-AB-G --- Gears - 40 Teeth x 16 mm x 3 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G016B-40-M04-030-030-AB-G Gears - 40 Teeth x 16 mm x 3 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$3.30 AUD $2.00 AUD
Each
40
Nr. 		16.00
mm 		3.000
mm 		16.800
mm 		1153173 | G016B-40-M04-030-030-AB-G --- Gears - 40 Teeth x 16 mm x 3 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G016B-40-M04-030-030-AB-G Gears - 40 Teeth x 16 mm x 3 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$3.30 AUD $2.00 AUD
Each
50
Nr. 		20.00
mm 		4.000
mm 		20.800
mm 		3.000
mm 		Module 0.4
 1161595 | G020B-50-M04-030-040-AB-G (2 Pcs) --- Gears - 50 Teeth x 20 mm x 4 mm
Material: cetal with Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G020B-50-M04-030-040-AB-G (2 Pcs) Gears - 50 Teeth x 20 mm x 4 mm
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.00 AUD
$6.60 AUD $4.00 AUD
Per 2
50
Nr. 		20.00
mm 		4.000
mm 		20.800
mm 		1161595 | G020B-50-M04-030-040-AB-G (2 Pcs) --- Gears - 50 Teeth x 20 mm x 4 mm
Material: cetal with Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G020B-50-M04-030-040-AB-G (2 Pcs) Gears - 50 Teeth x 20 mm x 4 mm
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$4.00 AUD
$6.60 AUD $4.00 AUD
Per 2
50
Nr. 		20.00
mm 		6.000
mm 		20.800
mm 		3.000
mm 		Module 0.4
 1161601 | G020B-50-M04-030-060-AB-G --- Gears - 50 Teeth x 20 mm x 6 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G020B-50-M04-030-060-AB-G Gears - 50 Teeth x 20 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
50
Nr. 		20.00
mm 		6.000
mm 		20.800
mm 		1161601 | G020B-50-M04-030-060-AB-G --- Gears - 50 Teeth x 20 mm x 6 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G020B-50-M04-030-060-AB-G Gears - 50 Teeth x 20 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
55
Nr. 		22.00
mm 		4.000
mm 		22.800
mm 		5.000
mm 		Module 0.4
 Ingranaggio cilindrico 55 x 22 x 4 - Modulo 0,4 in plastica - MBA (confezione da 2)
Material: Acetal - No Insert    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 55 x 22 x 4 - Modulo 0,4 in plastica - MBA (confezione da 2) Ingranaggio cilindrico 55 x 22 x 4 - Modulo 0,4 in plastica - MBA (confezione da 2) / Gears
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2
55
Nr. 		22.00
mm 		4.000
mm 		22.800
mm 		Ingranaggio cilindrico 55 x 22 x 4 - Modulo 0,4 in plastica - MBA (confezione da 2)
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 55 x 22 x 4 - Modulo 0,4 in plastica - MBA (confezione da 2) Ingranaggio cilindrico 55 x 22 x 4 - Modulo 0,4 in plastica - MBA (confezione da 2) / Gears
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2
60
Nr. 		24.00
mm 		3.000
mm 		24.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$14.00 AUD
$23.10 AUD $14.00 AUD
Each
60
Nr. 		24.00
mm 		3.000
mm 		24.800
mm 		Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 13.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 60 x 24 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$14.00 AUD
$23.10 AUD $14.00 AUD
Each
60
Nr. 		24.00
mm 		6.000
mm 		24.800
mm 		5.000
mm 		Module 0.4
 Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Plastica - MBA (Confezione da 1)
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Plastica - MBA (Confezione da 1) Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Plastica - MBA (Confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
60
Nr. 		24.00
mm 		6.000
mm 		24.800
mm 		Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Plastica - MBA (Confezione da 1)
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Plastica - MBA (Confezione da 1) Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Plastica - MBA (Confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
60
Nr. 		24.00
mm 		6.000
mm 		24.800
mm 		5.000
mm 		Module 0.4
 Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Ottone - MBA (Confezione da 1)
Material: Brass    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Brass
Part Number: Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Ottone - MBA (Confezione da 1) Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Ottone - MBA (Confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
60
Nr. 		24.00
mm 		6.000
mm 		24.800
mm 		Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Ottone - MBA (Confezione da 1)
Material: Brass    Face Width (FW): 5.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Brass
Part Number: Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Ottone - MBA (Confezione da 1) Ingranaggio cilindrico 60 x 24 x 6 - Modulo 0,4 Ottone - MBA (Confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
70
Nr. 		28.00
mm 		3.000
mm 		28.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
70
Nr. 		28.00
mm 		3.000
mm 		28.800
mm 		Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 70 x 28 x 3 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
70
Nr. 		28.00
mm 		4.000
mm 		28.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
70
Nr. 		28.00
mm 		4.000
mm 		28.800
mm 		Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 70 x 28 x 4 - Modulo 0,4 in plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
70
Nr. 		28.00
mm 		6.000
mm 		28.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2) Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2) / Gears
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2
70
Nr. 		28.00
mm 		6.000
mm 		28.800
mm 		Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2) Ingranaggio cilindrico 70 x 28 x 6 - Modulo 0,4 Plastica con inserto - MBA (confezione da 2) / Gears
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2
80
Nr. 		32.00
mm 		4.000
mm 		32.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
80
Nr. 		32.00
mm 		4.000
mm 		32.800
mm 		Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 80 x 32 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
85
Nr. 		34.00
mm 		4.000
mm 		34.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
85
Nr. 		34.00
mm 		4.000
mm 		34.800
mm 		Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) Ingranaggio cilindrico 85 x 34 x 4 - Modulo 0,4 Plastica con inserto - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$16.50 AUD $10.00 AUD
Each
90
Nr. 		36.00
mm 		4.000
mm 		36.800
mm 		3.000
mm 		Module 0.4
 Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1)
Material: Acetal - Brass Insert    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1) Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
90
Nr. 		36.00
mm 		4.000
mm 		36.800
mm 		Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1)
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1) Ingranaggio cilindrico 90 denti x diametro 36,8 mm. x 3 mm di larghezza con foro da 4 mm - Modulo 0,4 in plastica con inserto - 90 denti - MBA (confezione da 1) / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
95
Nr. 		38.00
mm 		4.000
mm 		38.800
mm 		3.000
mm 		Module 0.4
 1185422 | G038B-95-M04-030-040-AB-G --- Gears - 95 Teeth x 38 mm x 4 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G038B-95-M04-030-040-AB-G Gears - 95 Teeth x 38 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
95
Nr. 		38.00
mm 		4.000
mm 		38.800
mm 		1185422 | G038B-95-M04-030-040-AB-G --- Gears - 95 Teeth x 38 mm x 4 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G038B-95-M04-030-040-AB-G Gears - 95 Teeth x 38 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
100
Nr. 		40.00
mm 		4.000
mm 		40.800
mm 		3.000
mm 		Module 0.4
 1187439 | G040B-100-M04-030-040-AB-G --- Gears - 100 Teeth x 40 mm x 4 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G040B-100-M04-030-040-AB-G Gears - 100 Teeth x 40 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
100
Nr. 		40.00
mm 		4.000
mm 		40.800
mm 		1187439 | G040B-100-M04-030-040-AB-G --- Gears - 100 Teeth x 40 mm x 4 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G040B-100-M04-030-040-AB-G Gears - 100 Teeth x 40 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
100
Nr. 		40.00
mm 		6.000
mm 		40.800
mm 		3.000
mm 		Module 0.4
 1187443 | G040B-100-M04-030-060-AB-G --- Gears - 100 Teeth x 40 mm x 6 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G040B-100-M04-030-060-AB-G Gears - 100 Teeth x 40 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
100
Nr. 		40.00
mm 		6.000
mm 		40.800
mm 		1187443 | G040B-100-M04-030-060-AB-G --- Gears - 100 Teeth x 40 mm x 6 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G040B-100-M04-030-060-AB-G Gears - 100 Teeth x 40 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
108
Nr. 		43.20
mm 		6.000
mm 		44.000
mm 		5.000
mm 		Module 0.4
 1190406 | G043B-108-M04-050-060-A-P (2 Pcs) --- Gears - 108 Teeth x 43.2 mm x 6 mm
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G043B-108-M04-050-060-A-P (2 Pcs) Gears - 108 Teeth x 43.2 mm x 6 mm
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$33.00 AUD $20.00 AUD
Per 2
108
Nr. 		43.20
mm 		6.000
mm 		44.000
mm 		1190406 | G043B-108-M04-050-060-A-P (2 Pcs) --- Gears - 108 Teeth x 43.2 mm x 6 mm
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G043B-108-M04-050-060-A-P (2 Pcs) Gears - 108 Teeth x 43.2 mm x 6 mm
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$20.00 AUD
$33.00 AUD $20.00 AUD
Per 2
112
Nr. 		44.80
mm 		5.000
mm 		45.600
mm 		3.000
mm 		Module 0.4
 1191704 | G045B-112-M04-030-050-AB-G (3 Pcs) --- Gears - 112 Teeth x 44.8 mm x 5 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G045B-112-M04-030-050-AB-G (3 Pcs) Gears - 112 Teeth x 44.8 mm x 5 mm
1 pack (3 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 3
112
Nr. 		44.80
mm 		5.000
mm 		45.600
mm 		1191704 | G045B-112-M04-030-050-AB-G (3 Pcs) --- Gears - 112 Teeth x 44.8 mm x 5 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G045B-112-M04-030-050-AB-G (3 Pcs) Gears - 112 Teeth x 44.8 mm x 5 mm
1 pack (3 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 3
112
Nr. 		44.80
mm 		6.000
mm 		45.600
mm 		3.000
mm 		Module 0.4
 1191705 | G045B-112-M04-030-060-AB-G --- Gears - 112 Teeth x 44.8 mm x 6 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G045B-112-M04-030-060-AB-G Gears - 112 Teeth x 44.8 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
112
Nr. 		44.80
mm 		6.000
mm 		45.600
mm 		1191705 | G045B-112-M04-030-060-AB-G --- Gears - 112 Teeth x 44.8 mm x 6 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G045B-112-M04-030-060-AB-G Gears - 112 Teeth x 44.8 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
168
Nr. 		67.20
mm 		6.000
mm 		68.000
mm 		3.000
mm 		Module 0.4
 1203657 | G067B-168-M04-030-060-AB-G --- Gears - 168 Teeth x 67.2 mm x 6 mm
Material: Acetal - Brass Insert    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G067B-168-M04-030-060-AB-G Gears - 168 Teeth x 67.2 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$15.00 AUD
$24.75 AUD $15.00 AUD
Each
168
Nr. 		67.20
mm 		6.000
mm 		68.000
mm 		1203657 | G067B-168-M04-030-060-AB-G --- Gears - 168 Teeth x 67.2 mm x 6 mm
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.4    Hub Diameter (D1): 19.00 mm    Hub Projection (HL): 6.50 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.   
Category: Gears - Spur - Standard - Module 0.4 - Plastic
Part Number: G067B-168-M04-030-060-AB-G Gears - 168 Teeth x 67.2 mm x 6 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$15.00 AUD
$24.75 AUD $15.00 AUD
Each