Gears - Spur - Module 1.25 - Stainless

1 Item Available
  • PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. 303 stainless steel
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
Additional resources:
Module 1.25 Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
16
Nr. 		20.00
mm 		10.000
mm 		22.500
mm 		10.000
mm 		Module 1.25
 1114753 | G020B-16-M125-100-100-S3-G --- Gears - 16 Teeth x 20 mm x 10 mm
Material: 303 Stainless Steel    Hub Diameter (D1): 20.00 mm    Hub Projection (HL): 10.00 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 7 - ( AGMA 10 )   
Part Number: G020B-16-M125-100-100-S3-G Gears - 16 Teeth x 20 mm x 10 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$60.00 AUD
$60.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
16
Nr. 		20.00
mm 		10.000
mm 		22.500
mm 		1114753 | G020B-16-M125-100-100-S3-G --- Gears - 16 Teeth x 20 mm x 10 mm
Material: 303 Stainless Steel    Face Width (FW): 10.000 mm    Pitch: Module 1.25    Hub Diameter (D1): 20.00 mm    Hub Projection (HL): 10.00 mm    Locking Method: Set Screw    Pressure Angle: 20 Deg.    Quality: ISO 7 - ( AGMA 10 )   
Part Number: G020B-16-M125-100-100-S3-G Gears - 16 Teeth x 20 mm x 10 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$60.00 AUD
$60.00 AUD
Each