Gears - Spur - Module 0.8 - Plastic - Standard - Standard

15 Products in this selection
  • PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
Additional resources:
Module 0.8 Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
12
Nr. 		9.20
mm 		3.000
mm 		10.80
mm 		4.00
mm 		1098040 | G009B-12-M08-040-030-A-P --- Gears - 12 Teeth x 9.2 mm x 3 mm
Material: Acetal    Hub Diameter (D1): 6.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G009B-12-M08-040-030-A-P Gears - 12 Teeth x 9.2 mm x 3 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$6.23 AUD
$6.23 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
12
Nr. 		9.20
mm 		3.000
mm 		10.80
mm 		1098040 | G009B-12-M08-040-030-A-P --- Gears - 12 Teeth x 9.2 mm x 3 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 6.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G009B-12-M08-040-030-A-P Gears - 12 Teeth x 9.2 mm x 3 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$6.23 AUD
$6.23 AUD
Each
15
Nr. 		12.00
mm 		3.000
mm 		13.60
mm 		4.00
mm 		1108977 | G012B-15-M08-040-030-A-P --- Gears - 15 Teeth x 12 mm x 3 mm
Material: Acetal    Hub Diameter (D1): 6.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G012B-15-M08-040-030-A-P Gears - 15 Teeth x 12 mm x 3 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$6.68 AUD
$6.68 AUD
Each
15
Nr. 		12.00
mm 		3.000
mm 		13.60
mm 		1108977 | G012B-15-M08-040-030-A-P --- Gears - 15 Teeth x 12 mm x 3 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 6.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G012B-15-M08-040-030-A-P Gears - 15 Teeth x 12 mm x 3 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$6.68 AUD
$6.68 AUD
Each
16
Nr. 		12.80
mm 		4.000
mm 		14.40
mm 		4.00
mm 		1114340 | G013B-16-M08-040-040-A-P --- Gears - 16 Teeth x 12.8 mm x 4 mm
Material: Acetal    Hub Diameter (D1): 8.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G013B-16-M08-040-040-A-P Gears - 16 Teeth x 12.8 mm x 4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$6.95 AUD
$6.95 AUD
Each
16
Nr. 		12.80
mm 		4.000
mm 		14.40
mm 		1114340 | G013B-16-M08-040-040-A-P --- Gears - 16 Teeth x 12.8 mm x 4 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 8.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G013B-16-M08-040-040-A-P Gears - 16 Teeth x 12.8 mm x 4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$6.95 AUD
$6.95 AUD
Each
24
Nr. 		19.20
mm 		5.000
mm 		20.80
mm 		4.00
mm 		1131036 | G019B-24-M08-040-050-A-P --- Gears - 24 Teeth x 19.2 mm x 5 mm
Material: Acetal    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G019B-24-M08-040-050-A-P Gears - 24 Teeth x 19.2 mm x 5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$8.77 AUD
$8.77 AUD
Each
24
Nr. 		19.20
mm 		5.000
mm 		20.80
mm 		1131036 | G019B-24-M08-040-050-A-P --- Gears - 24 Teeth x 19.2 mm x 5 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G019B-24-M08-040-050-A-P Gears - 24 Teeth x 19.2 mm x 5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$8.77 AUD
$8.77 AUD
Each
25
Nr. 		20.00
mm 		5.000
mm 		21.60
mm 		4.00
mm 		1132950 | G020B-25-M08-040-050-A-P --- Gears - 25 Teeth x 20 mm x 5 mm
Material: Acetal    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G020B-25-M08-040-050-A-P Gears - 25 Teeth x 20 mm x 5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$9.23 AUD
$9.23 AUD
Each
25
Nr. 		20.00
mm 		5.000
mm 		21.60
mm 		1132950 | G020B-25-M08-040-050-A-P --- Gears - 25 Teeth x 20 mm x 5 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G020B-25-M08-040-050-A-P Gears - 25 Teeth x 20 mm x 5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$9.23 AUD
$9.23 AUD
Each
30
Nr. 		24.00
mm 		6.000
mm 		25.60
mm 		4.00
mm 		1141371 | G024B-30-M08-040-060-A-P (2 Pcs) --- Gears - 30 Teeth x 24 mm x 6 mm
Material: Acetal    Hub Diameter (D1): 12.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G024B-30-M08-040-060-A-P (2 Pcs) Gears - 30 Teeth x 24 mm x 6 mm
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$12.00 AUD
Per 2
30
Nr. 		24.00
mm 		6.000
mm 		25.60
mm 		1141371 | G024B-30-M08-040-060-A-P (2 Pcs) --- Gears - 30 Teeth x 24 mm x 6 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 12.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G024B-30-M08-040-060-A-P (2 Pcs) Gears - 30 Teeth x 24 mm x 6 mm
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$12.00 AUD
$12.00 AUD
Per 2
35
Nr. 		28.00
mm 		6.000
mm 		29.60
mm 		4.00
mm 		1147692 | G028B-35-M08-040-060-A-P --- Gears - 35 Teeth x 28 mm x 6 mm
Material: Acetal    Hub Diameter (D1): 12.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G028B-35-M08-040-060-A-P Gears - 35 Teeth x 28 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$11.05 AUD
$11.05 AUD
Each
35
Nr. 		28.00
mm 		6.000
mm 		29.60
mm 		1147692 | G028B-35-M08-040-060-A-P --- Gears - 35 Teeth x 28 mm x 6 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 12.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G028B-35-M08-040-060-A-P Gears - 35 Teeth x 28 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$11.05 AUD
$11.05 AUD
Each
36
Nr. 		29.80
mm 		6.000
mm 		31.40
mm 		4.00
mm 		1149491 | G030B-36-M08-040-060-A-P --- Gears - 36 Teeth x 29.8 mm x 6 mm
Material: Acetal    Hub Diameter (D1): 12.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G030B-36-M08-040-060-A-P Gears - 36 Teeth x 29.8 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$11.41 AUD
$11.41 AUD
Each
36
Nr. 		29.80
mm 		6.000
mm 		31.40
mm 		1149491 | G030B-36-M08-040-060-A-P --- Gears - 36 Teeth x 29.8 mm x 6 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 12.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G030B-36-M08-040-060-A-P Gears - 36 Teeth x 29.8 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$11.41 AUD
$11.41 AUD
Each
45
Nr. 		36.00
mm 		6.000
mm 		37.60
mm 		4.00
mm 		1157867 | G036B-45-M08-040-060-A-P --- Gears - 45 Teeth x 36 mm x 6 mm
Material: Acetal    Hub Diameter (D1): 12.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G036B-45-M08-040-060-A-P Gears - 45 Teeth x 36 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$12.95 AUD
$12.95 AUD
Each
45
Nr. 		36.00
mm 		6.000
mm 		37.60
mm 		1157867 | G036B-45-M08-040-060-A-P --- Gears - 45 Teeth x 36 mm x 6 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 12.00 mm    Hub Projection (HL): 5.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G036B-45-M08-040-060-A-P Gears - 45 Teeth x 36 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$12.95 AUD
$12.95 AUD
Each
48
Nr. 		38.40
mm 		6.000
mm 		40.00
mm 		4.00
mm 		1160283 | G038B-48-M08-040-060-A-P --- Gears - 48 Teeth x 38.4 mm x 6 mm
Material: Acetal    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G038B-48-M08-040-060-A-P Gears - 48 Teeth x 38.4 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$13.41 AUD
$13.41 AUD
Each
48
Nr. 		38.40
mm 		6.000
mm 		40.00
mm 		1160283 | G038B-48-M08-040-060-A-P --- Gears - 48 Teeth x 38.4 mm x 6 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G038B-48-M08-040-060-A-P Gears - 48 Teeth x 38.4 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$13.41 AUD
$13.41 AUD
Each
50
Nr. 		40.00
mm 		6.000
mm 		41.60
mm 		4.00
mm 		1161828 | G040B-50-M08-040-060-A-P --- Gears - 50 Teeth x 40 mm x 6 mm
Material: Acetal    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G040B-50-M08-040-060-A-P Gears - 50 Teeth x 40 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$13.77 AUD
$13.77 AUD
Each
50
Nr. 		40.00
mm 		6.000
mm 		41.60
mm 		1161828 | G040B-50-M08-040-060-A-P --- Gears - 50 Teeth x 40 mm x 6 mm
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: G040B-50-M08-040-060-A-P Gears - 50 Teeth x 40 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$13.77 AUD
$13.77 AUD
Each
56
Nr. 		44.80
mm 		6.000
mm 		46.40
mm 		4.00
mm 		Ingranaggio cilindrico 56 x 44,8 x 6 - Modulo 0,8 plastica - MBA (confezione da 1)
Material: Acetal    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: Ingranaggio cilindrico 56 x 44,8 x 6 - Modulo 0,8 plastica - MBA (confezione da 1) Ingranaggio cilindrico 56 x 44,8 x 6 - Modulo 0,8 plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$13.95 AUD
$13.95 AUD
Each
56
Nr. 		44.80
mm 		6.000
mm 		46.40
mm 		Ingranaggio cilindrico 56 x 44,8 x 6 - Modulo 0,8 plastica - MBA (confezione da 1)
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: Ingranaggio cilindrico 56 x 44,8 x 6 - Modulo 0,8 plastica - MBA (confezione da 1) Ingranaggio cilindrico 56 x 44,8 x 6 - Modulo 0,8 plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$13.95 AUD
$13.95 AUD
Each
64
Nr. 		51.20
mm 		6.000
mm 		52.80
mm 		4.00
mm 		Ingranaggio cilindrico 64 x 51,20 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1)
Material: Acetal    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: Ingranaggio cilindrico 64 x 51,20 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1) Ingranaggio cilindrico 64 x 51,20 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$15.68 AUD
$15.68 AUD
Each
64
Nr. 		51.20
mm 		6.000
mm 		52.80
mm 		Ingranaggio cilindrico 64 x 51,20 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1)
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: Ingranaggio cilindrico 64 x 51,20 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1) Ingranaggio cilindrico 64 x 51,20 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$15.68 AUD
$15.68 AUD
Each
70
Nr. 		56.00
mm 		6.000
mm 		57.60
mm 		4.00
mm 		Ingranaggio cilindrico 70 x 56 x 6 - Modulo 0,8 in plastica - MBA (confezione da 1)
Material: Acetal    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: Ingranaggio cilindrico 70 x 56 x 6 - Modulo 0,8 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 70 x 56 x 6 - Modulo 0,8 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$16.14 AUD
$16.14 AUD
Each
70
Nr. 		56.00
mm 		6.000
mm 		57.60
mm 		Ingranaggio cilindrico 70 x 56 x 6 - Modulo 0,8 in plastica - MBA (confezione da 1)
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: Ingranaggio cilindrico 70 x 56 x 6 - Modulo 0,8 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 70 x 56 x 6 - Modulo 0,8 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$16.14 AUD
$16.14 AUD
Each
72
Nr. 		57.60
mm 		6.000
mm 		59.20
mm 		4.00
mm 		Ingranaggio cilindrico 72 x 57,60 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1)
Material: Acetal    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: Ingranaggio cilindrico 72 x 57,60 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1) Ingranaggio cilindrico 72 x 57,60 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 25, 2025
$16.95 AUD
$16.95 AUD
Each
72
Nr. 		57.60
mm 		6.000
mm 		59.20
mm 		Ingranaggio cilindrico 72 x 57,60 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1)
Material: Acetal    Face Width (FW): 4.00 mm    Hub Diameter (D1): 16.00 mm    Hub Projection (HL): 6.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: No Insert   
Part Number: Ingranaggio cilindrico 72 x 57,60 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1) Ingranaggio cilindrico 72 x 57,60 x 6 - Modulo 0,8 Plastica - MBA (Confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 25, 2025
$16.95 AUD
$16.95 AUD
Each