Gears - Spur - Module 0.5 - Plastic - Standard

13 Products in this selection
  • PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.
  • FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
Additional resources:
Module 0.5 Gear Racks
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Pitch Indicative
Image
12
Nr. 		6.00
mm 		2.000
mm 		7.000
mm 		3.000
mm 		Module 0.5
 1097781 | G006B-12-M05-030-020-A-P (5 Pcs) --- Gears - 12 Teeth x 6 mm x 2 mm
Material: Acetal - No Insert    Hub Diameter (D1): 4.00 mm    Hub Projection (HL): 4.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G006B-12-M05-030-020-A-P (5 Pcs) Gears - 12 Teeth x 6 mm x 2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Mon, Jan 27, 2025
$13.41 AUD
$13.41 AUD
Per 5
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
12
Nr. 		6.00
mm 		2.000
mm 		7.000
mm 		1097781 | G006B-12-M05-030-020-A-P (5 Pcs) --- Gears - 12 Teeth x 6 mm x 2 mm
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 4.00 mm    Hub Projection (HL): 4.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G006B-12-M05-030-020-A-P (5 Pcs) Gears - 12 Teeth x 6 mm x 2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Mon, Jan 27, 2025
$13.41 AUD
$13.41 AUD
Per 5
15
Nr. 		7.50
mm 		2.000
mm 		8.500
mm 		4.00
mm 		Module 0.5
 1108712 | G008B-15-M05-040-020-A-N --- Ondrives - 15 Teeth x 7.5 mm x 2 mm
Material: Acetal    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G008B-15-M05-040-020-A-N Ondrives - 15 Teeth x 7.5 mm x 2 mm / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.00 AUD
$6.00 AUD
Each
15
Nr. 		7.50
mm 		2.000
mm 		8.500
mm 		1108712 | G008B-15-M05-040-020-A-N --- Ondrives - 15 Teeth x 7.5 mm x 2 mm
Material: Acetal    Face Width (FW): 4.00 mm    Pitch: Module 0.5    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G008B-15-M05-040-020-A-N Ondrives - 15 Teeth x 7.5 mm x 2 mm / Gears
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.00 AUD
$6.00 AUD
Each
16
Nr. 		8.00
mm 		3.000
mm 		9.000
mm 		3.000
mm 		Module 0.5
 1114052 | G008B-16-M05-030-030-A-P --- Gears - 16 Teeth x 8 mm x 3 mm
Material: Acetal - No Insert    Hub Diameter (D1): 6.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G008B-16-M05-030-030-A-P Gears - 16 Teeth x 8 mm x 3 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$6.23 AUD
$6.23 AUD
Each
16
Nr. 		8.00
mm 		3.000
mm 		9.000
mm 		1114052 | G008B-16-M05-030-030-A-P --- Gears - 16 Teeth x 8 mm x 3 mm
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 6.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G008B-16-M05-030-030-A-P Gears - 16 Teeth x 8 mm x 3 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$6.23 AUD
$6.23 AUD
Each
20
Nr. 		10.00
mm 		4.000
mm 		11.000
mm 		3.000
mm 		Module 0.5
 1123651 | G010B-20-M05-030-040-A-P --- Gears - 20 Teeth x 10 mm x 4 mm
Material: Acetal - No Insert    Hub Diameter (D1): 8.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G010B-20-M05-030-040-A-P Gears - 20 Teeth x 10 mm x 4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$7.86 AUD
$7.86 AUD
Each
20
Nr. 		10.00
mm 		4.000
mm 		11.000
mm 		1123651 | G010B-20-M05-030-040-A-P --- Gears - 20 Teeth x 10 mm x 4 mm
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 8.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G010B-20-M05-030-040-A-P Gears - 20 Teeth x 10 mm x 4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$7.86 AUD
$7.86 AUD
Each
24
Nr. 		12.00
mm 		4.000
mm 		13.000
mm 		3.000
mm 		Module 0.5
 1130875 | G012B-24-M05-030-040-A-P --- Gears - 24 Teeth x 12 mm x 4 mm
Material: Acetal - No Insert    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G012B-24-M05-030-040-A-P Gears - 24 Teeth x 12 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$2.00 AUD
Each
24
Nr. 		12.00
mm 		4.000
mm 		13.000
mm 		1130875 | G012B-24-M05-030-040-A-P --- Gears - 24 Teeth x 12 mm x 4 mm
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G012B-24-M05-030-040-A-P Gears - 24 Teeth x 12 mm x 4 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$2.00 AUD
Each
25
Nr. 		12.50
mm 		4.000
mm 		13.500
mm 		3.000
mm 		Module 0.5
 1132730 | G013B-25-M05-030-040-A-P --- Gears - 25 Teeth x 12.5 mm x 4 mm
Material: Acetal - No Insert    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G013B-25-M05-030-040-A-P Gears - 25 Teeth x 12.5 mm x 4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$8.68 AUD
$8.68 AUD
Each
25
Nr. 		12.50
mm 		4.000
mm 		13.500
mm 		1132730 | G013B-25-M05-030-040-A-P --- Gears - 25 Teeth x 12.5 mm x 4 mm
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G013B-25-M05-030-040-A-P Gears - 25 Teeth x 12.5 mm x 4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$8.68 AUD
$8.68 AUD
Each
28
Nr. 		14.00
mm 		4.000
mm 		15.000
mm 		3.000
mm 		Module 0.5
 1138716 | G014B-28-M05-030-040-A-P --- Gears - 28 Teeth x 14 mm x 4 mm
Material: Acetal - No Insert    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G014B-28-M05-030-040-A-P Gears - 28 Teeth x 14 mm x 4 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$9.68 AUD
$9.68 AUD
Each
28
Nr. 		14.00
mm 		4.000
mm 		15.000
mm 		1138716 | G014B-28-M05-030-040-A-P --- Gears - 28 Teeth x 14 mm x 4 mm
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: G014B-28-M05-030-040-A-P Gears - 28 Teeth x 14 mm x 4 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$9.68 AUD
$9.68 AUD
Each
56
Nr. 		28.00
mm 		6.000
mm 		29.000
mm 		3.000
mm 		Module 0.5
 Ingranaggio cilindrico 56 x 28 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 56 x 28 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 56 x 28 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
56
Nr. 		28.00
mm 		6.000
mm 		29.000
mm 		Ingranaggio cilindrico 56 x 28 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 56 x 28 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 56 x 28 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
64
Nr. 		32.00
mm 		6.000
mm 		33.000
mm 		3.000
mm 		Module 0.5
 Ingranaggio cilindrico 64 x 32 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 64 x 32 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 64 x 32 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
64
Nr. 		32.00
mm 		6.000
mm 		33.000
mm 		Ingranaggio cilindrico 64 x 32 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 64 x 32 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 64 x 32 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
70
Nr. 		35.00
mm 		6.000
mm 		36.000
mm 		3.000
mm 		Module 0.5
 Ingranaggio cilindrico 70 x 35 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 70 x 35 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 70 x 35 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
70
Nr. 		35.00
mm 		6.000
mm 		36.000
mm 		Ingranaggio cilindrico 70 x 35 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 70 x 35 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 70 x 35 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
70
Nr. 		35.00
mm 		10.000
mm 		36.000
mm 		5.000
mm 		Module 0.5
 Ingranaggio cilindrico 70 x 35 x 10 - Modulo 0,5 in plastica - MBA (confezione da 5)
Material: Acetal - No Insert    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 20 Deg.    Quality: ISO 7 (AGMA 10)   
Part Number: Ingranaggio cilindrico 70 x 35 x 10 - Modulo 0,5 in plastica - MBA (confezione da 5) Ingranaggio cilindrico 70 x 35 x 10 - Modulo 0,5 in plastica - MBA (confezione da 5) / Gears
1 pack (5 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 5
70
Nr. 		35.00
mm 		10.000
mm 		36.000
mm 		Ingranaggio cilindrico 70 x 35 x 10 - Modulo 0,5 in plastica - MBA (confezione da 5)
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Pitch: Module 0.5    Hub Diameter (D1): Hubless mm    Hub Projection (HL): None mm    Locking Method: None    Pressure Angle: 20 Deg.    Quality: ISO 7 (AGMA 10)   
Part Number: Ingranaggio cilindrico 70 x 35 x 10 - Modulo 0,5 in plastica - MBA (confezione da 5) Ingranaggio cilindrico 70 x 35 x 10 - Modulo 0,5 in plastica - MBA (confezione da 5) / Gears
1 pack (5 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 5
72
Nr. 		36.00
mm 		6.000
mm 		37.000
mm 		3.000
mm 		Module 0.5
 Ingranaggio cilindrico 72 x 36 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 72 x 36 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 72 x 36 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
72
Nr. 		36.00
mm 		6.000
mm 		37.000
mm 		Ingranaggio cilindrico 72 x 36 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 72 x 36 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 72 x 36 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
80
Nr. 		40.00
mm 		6.000
mm 		41.000
mm 		3.000
mm 		Module 0.5
 Ingranaggio cilindrico 80 x 40 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 80 x 40 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 80 x 40 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each
80
Nr. 		40.00
mm 		6.000
mm 		41.000
mm 		Ingranaggio cilindrico 80 x 40 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1)
Material: Acetal - No Insert    Face Width (FW): 3.000 mm    Pitch: Module 0.5    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: No Set Screw    Pressure Angle: 20 Deg.    Quality: Commercial - Molded   
Part Number: Ingranaggio cilindrico 80 x 40 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) Ingranaggio cilindrico 80 x 40 x 6 - Modulo 0,5 in plastica - MBA (confezione da 1) / Gears
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$14.41 AUD
$14.41 AUD
Each