Gears - Pinion Wire - 32 DP

1 Item Available
  • Brass and carbon steel.
  • Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.
  • Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.
  • DP is Diametrical Pitch
Teeth Outside Diameter (OD) Length (L) Pressure Angle Indicative
Image
9
Nr. 		8.738
mm 		300
mm 		20.0
Deg. 		1085414 | G007L-09-D32-0300-C (Length) --- Gears - 9 Teeth x 8.738 mm x 300 mm
Material: Carbon steel    Pitch Diameter (PD): 7.14 mm   
Part Number: G007L-09-D32-0300-C (Length) Gears - 9 Teeth x 8.738 mm x 300 mm
3 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$70.00 AUD
$70.00 AUD
Per Length
Teeth Outside Diameter (OD) Length (L) Pressure Angle Indicative
Image
9
Nr. 		8.738
mm 		300
mm 		20.0
Deg. 		1085414 | G007L-09-D32-0300-C (Length) --- Gears - 9 Teeth x 8.738 mm x 300 mm
Material: Carbon steel    Pitch Diameter (PD): 7.14 mm   
Part Number: G007L-09-D32-0300-C (Length) Gears - 9 Teeth x 8.738 mm x 300 mm
3 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$70.00 AUD
$70.00 AUD
Per Length