Gears - Mitre - Module 1 - Zinc Diecast

1 Item Available
  • 1:1 Ratio. 20o Pressure Angle
  • Mitre gears are used with a matching gear of the same pitch and number of teeth.
  • This provides a 1:1 ratio on a 90o angle.
  • See Gears - Bevel for other ratios.
Teeth Pitch Diameter (pd) Bore (d) Overall Length (D) Sold Per Hub Diameter (E) Indicative
Image
16
Nr. 		16.000
mm 		6.000
mm 		13.100
mm 		Each
 12.000 / No Set Screw
mm 		1114423 | GM-016-M1-060-ZD (2 Pcs) --- Gears - 16 Teeth x 16 mm x 6 mm
Material: Commercial / Die Cast Zinc    Hub Projection (F): 7.50 mm    Mounting Distance (C): 17.700 mm    Face Width (B): 4.500 mm   
Part Number: GM-016-M1-060-ZD (2 Pcs) Gears - 16 Teeth x 16 mm x 6 mm
20 units (40 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2
Teeth Pitch Diameter (pd) Bore (d) Overall Length (D) Indicative
Image
16
Nr. 		16.000
mm 		6.000
mm 		13.100
mm 		1114423 | GM-016-M1-060-ZD (2 Pcs) --- Gears - 16 Teeth x 16 mm x 6 mm
Material: Commercial / Die Cast Zinc    Sold Per: Each    Hub Diameter (E): 12.000 / No Set Screw mm    Hub Projection (F): 7.50 mm    Mounting Distance (C): 17.700 mm    Face Width (B): 4.500 mm   
Part Number: GM-016-M1-060-ZD (2 Pcs) Gears - 16 Teeth x 16 mm x 6 mm
20 units (40 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Per 2