Bushes - Unflanged - Plastic - Iglidur G

2 Products in this selection
  • General purpose maintenance free dry running.
  • Specific Gravity 1.45 g/cm3.
  • Operating Temp 220 C short term / 130 C long term.
  • Tensile Strength at 20 oC 210 Mpa.
  • Hardness 81 Shore D (DIN53505).
  • Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Additional resources:
Bushes PDF Catalogue
Bronze Unflanged Bushes
Plastic Flanged Bushes
Nom. ID (d) Nom. OD (D) Length (s) Indicative
Image
6.350
mm
+ 0.025 / + 0.083 		7.938
mm 		12.700
mm
+ 0.000 / - 0.270 		1072394 | BP0064-0079-0127-PG (7 Pcs) --- Unflanged Bushes - 6.35 mm x 7.938 mm x 12.7 mm
Material: Iglidur G   
Part Number: BP0064-0079-0127-PG (7 Pcs) Unflanged Bushes - 6.35 mm x 7.938 mm x 12.7 mm
1 pack (7 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.50 AUD
$17.32 AUD $10.50 AUD
Per 7
Nom. ID (d) Nom. OD (D) Length (s) Indicative
Image
6.350
mm
+ 0.025 / + 0.083 		7.938
mm 		12.700
mm
+ 0.000 / - 0.270 		1072394 | BP0064-0079-0127-PG (7 Pcs) --- Unflanged Bushes - 6.35 mm x 7.938 mm x 12.7 mm
Material: Iglidur G   
Part Number: BP0064-0079-0127-PG (7 Pcs) Unflanged Bushes - 6.35 mm x 7.938 mm x 12.7 mm
1 pack (7 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.50 AUD
$17.32 AUD $10.50 AUD
Per 7
7.000
mm
+ 0.025 / + 0.083 		9.000
mm 		10.000
mm
+ 0.000 / - 0.220 		Boccola in plastica 7 x 9 x 10 mm - Liscia Iglidur G - MBA (confezione da 20)
Material: Iglidur G   
Part Number: Boccola in plastica 7 x 9 x 10 mm - Liscia Iglidur G - MBA (confezione da 20) Boccola in plastica 7 x 9 x 10 mm - Liscia Iglidur G - MBA (confezione da 20) / Bushes
2 units (20 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$22.00 AUD
$36.30 AUD $22.00 AUD
Per 10
7.000
mm
+ 0.025 / + 0.083 		9.000
mm 		10.000
mm
+ 0.000 / - 0.220 		Boccola in plastica 7 x 9 x 10 mm - Liscia Iglidur G - MBA (confezione da 20)
Material: Iglidur G   
Part Number: Boccola in plastica 7 x 9 x 10 mm - Liscia Iglidur G - MBA (confezione da 20) Boccola in plastica 7 x 9 x 10 mm - Liscia Iglidur G - MBA (confezione da 20) / Bushes
2 units (20 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$22.00 AUD
$36.30 AUD $22.00 AUD
Per 10