Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Standard

273 Products in this selection
  • Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
  • Tooth Length (T) - 0.76mm.
  • Tooth Height (H) - 0.46mm.
  • Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm.
  • Pitch (P) - 2.032mm (0.08 inch)
Additional resources:
Timing Belts Catalogue PDF
Timing Pulleys Catalogue
Teeth Length Width Reinforcement Appearance Indicative
Image
30
Nr. 		60.96
mm 		3.2
mm 		Polyester
 Orange
 1142300 | B-MXL-0030-0032-PPO --- Belts - 30 Teeth x 60.96 mm x 3.2 mm
Material: Polyurethane with Polyester Cords    Breaking Strength: 178 N    Min Temperature: -18 Deg C    Max Temperature: 66 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: B-MXL-0030-0032-PPO Belts - 30 Teeth x 60.96 mm x 3.2 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.00 AUD
$4.00 AUD
Each
Teeth Length Width Indicative
Image
30
Nr. 		60.96
mm 		3.2
mm 		1142300 | B-MXL-0030-0032-PPO --- Belts - 30 Teeth x 60.96 mm x 3.2 mm
Material: Polyurethane with Polyester Cords    Reinforcement: Polyester    Appearance: Orange    Breaking Strength: 178 N    Min Temperature: -18 Deg C    Max Temperature: 66 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: B-MXL-0030-0032-PPO Belts - 30 Teeth x 60.96 mm x 3.2 mm
1 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$4.00 AUD
$4.00 AUD
Each
33
Nr. 		67.056
mm 		3.2
mm 		Fibreglass
 Black
 1146299 | B-MXL-0033-0032-NFB --- Belts - 33 Teeth x 67.056 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 228 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C   
Part Number: B-MXL-0033-0032-NFB Belts - 33 Teeth x 67.056 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$9.95 AUD
$9.95 AUD
Each
33
Nr. 		67.056
mm 		3.2
mm 		1146299 | B-MXL-0033-0032-NFB --- Belts - 33 Teeth x 67.056 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 228 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C   
Part Number: B-MXL-0033-0032-NFB Belts - 33 Teeth x 67.056 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$9.95 AUD
$9.95 AUD
Each
36
Nr. 		73.152
mm 		3.2
mm 		Fibreglass
 Black
 Cinghia dentata 36 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 36 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 36 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
36
Nr. 		73.152
mm 		3.2
mm 		Cinghia dentata 36 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 36 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 36 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
40
Nr. 		81.28
mm 		3.2
mm 		Fibreglass
 Black
 1154305 | B-MXL-0040-0032-NFB --- Belts - 40 Teeth x 81.28 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0040-0032-NFB Belts - 40 Teeth x 81.28 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
40
Nr. 		81.28
mm 		3.2
mm 		1154305 | B-MXL-0040-0032-NFB --- Belts - 40 Teeth x 81.28 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0040-0032-NFB Belts - 40 Teeth x 81.28 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
41
Nr. 		83.312
mm 		3.2
mm 		Fibreglass
 Black
 1155041 | B-MXL-0041-0032-NFB --- Belts - 41 Teeth x 83.312 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 225 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0041-0032-NFB Belts - 41 Teeth x 83.312 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
41
Nr. 		83.312
mm 		3.2
mm 		1155041 | B-MXL-0041-0032-NFB --- Belts - 41 Teeth x 83.312 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 225 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0041-0032-NFB Belts - 41 Teeth x 83.312 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
42
Nr. 		85.344
mm 		3.2
mm 		Fibreglass
 Black
 1155875 | B-MXL-0042-0032-NFB --- Belts - 42 Teeth x 85.344 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0042-0032-NFB Belts - 42 Teeth x 85.344 mm x 3.2 mm
8 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
42
Nr. 		85.344
mm 		3.2
mm 		1155875 | B-MXL-0042-0032-NFB --- Belts - 42 Teeth x 85.344 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0042-0032-NFB Belts - 42 Teeth x 85.344 mm x 3.2 mm
8 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
44
Nr. 		89.408
mm 		3.2
mm 		Fibreglass
 Black
 1156873 | B-MXL-0044-0032-NFB --- Belts - 44 Teeth x 89.408 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0044-0032-NFB Belts - 44 Teeth x 89.408 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
44
Nr. 		89.408
mm 		3.2
mm 		1156873 | B-MXL-0044-0032-NFB --- Belts - 44 Teeth x 89.408 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0044-0032-NFB Belts - 44 Teeth x 89.408 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
45
Nr. 		91.44
mm 		3.2
mm 		Fibreglass
 Black
 1158426 | B-MXL-0045-0032-NFB --- Belts - 45 Teeth x 91.44 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0045-0032-NFB Belts - 45 Teeth x 91.44 mm x 3.2 mm
6 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
45
Nr. 		91.44
mm 		3.2
mm 		1158426 | B-MXL-0045-0032-NFB --- Belts - 45 Teeth x 91.44 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0045-0032-NFB Belts - 45 Teeth x 91.44 mm x 3.2 mm
6 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
47
Nr. 		95.504
mm 		3.2
mm 		Fibreglass
 Black
 1159495 | B-MXL-0047-0032-NFB --- Belts - 47 Teeth x 95.504 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C   
Part Number: B-MXL-0047-0032-NFB Belts - 47 Teeth x 95.504 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
47
Nr. 		95.504
mm 		3.2
mm 		1159495 | B-MXL-0047-0032-NFB --- Belts - 47 Teeth x 95.504 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C   
Part Number: B-MXL-0047-0032-NFB Belts - 47 Teeth x 95.504 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.50 AUD
$6.50 AUD
Each
48
Nr. 		97.536
mm 		3.2
mm 		Fibreglass
 Black
 1160524 | B-MXL-0048-0032-NFB --- Belts - 48 Teeth x 97.536 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0048-0032-NFB Belts - 48 Teeth x 97.536 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$9.86 AUD
$9.86 AUD
Each
48
Nr. 		97.536
mm 		3.2
mm 		1160524 | B-MXL-0048-0032-NFB --- Belts - 48 Teeth x 97.536 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0048-0032-NFB Belts - 48 Teeth x 97.536 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$9.86 AUD
$9.86 AUD
Each
49
Nr. 		99.568
mm 		3.2
mm 		Fibreglass
 Black
 1160954 | B-MXL-0049-0032-NFB --- Belts - 49 Teeth x 99.568 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0049-0032-NFB Belts - 49 Teeth x 99.568 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$9.86 AUD
$9.86 AUD
Each
49
Nr. 		99.568
mm 		3.2
mm 		1160954 | B-MXL-0049-0032-NFB --- Belts - 49 Teeth x 99.568 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0049-0032-NFB Belts - 49 Teeth x 99.568 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$9.86 AUD
$9.86 AUD
Each
50
Nr. 		101.6
mm 		3.2
mm 		Fibreglass
 Black
 1162467 | B-MXL-0050-0032-NFB --- Belts - 50 Teeth x 101.6 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0050-0032-NFB Belts - 50 Teeth x 101.6 mm x 3.2 mm
2 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$6.86 AUD
$6.86 AUD
Each
50
Nr. 		101.6
mm 		3.2
mm 		1162467 | B-MXL-0050-0032-NFB --- Belts - 50 Teeth x 101.6 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0050-0032-NFB Belts - 50 Teeth x 101.6 mm x 3.2 mm
2 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$6.86 AUD
$6.86 AUD
Each
50
Nr. 		101.6
mm 		3.2
mm 		Kevlar
 Grey
 1162470 | B-MXL-0050-0032-PKG --- Belts - 50 Teeth x 101.6 mm x 3.2 mm
Material: Polyurethane with Kevlar Cords    Breaking Strength: 356 N    Min Temperature: -18 Deg C    Max Temperature: 66 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: B-MXL-0050-0032-PKG Belts - 50 Teeth x 101.6 mm x 3.2 mm
5 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$13.20 AUD $8.00 AUD
Each
50
Nr. 		101.6
mm 		3.2
mm 		1162470 | B-MXL-0050-0032-PKG --- Belts - 50 Teeth x 101.6 mm x 3.2 mm
Material: Polyurethane with Kevlar Cords    Reinforcement: Kevlar    Appearance: Grey    Breaking Strength: 356 N    Min Temperature: -18 Deg C    Max Temperature: 66 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: B-MXL-0050-0032-PKG Belts - 50 Teeth x 101.6 mm x 3.2 mm
5 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$8.00 AUD
$13.20 AUD $8.00 AUD
Each
50
Nr. 		101.6
mm 		3.2
mm 		Polyester
 Orange
 Cinghia dentata da 50 denti, larghezza 3,2 mm, poliuretano imperiale con corde in poliestere, arancione, passo trapezoidale MXL da 2,032 mm (0,08 pollici), MBA (confezione da 2)
Material: Polyurethane with Polyester Cords    Breaking Strength: 178 N    Min Temperature: -18 Deg C    Max Temperature: 66 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: Cinghia dentata da 50 denti, larghezza 3,2 mm, poliuretano imperiale con corde in poliestere, arancione, passo trapezoidale MXL da 2,032 mm (0,08 pollici), MBA (confezione da 2) Cinghia dentata da 50 denti, larghezza 3,2 mm, poliuretano imperiale con corde in poliestere, arancione, passo trapezoidale MXL da 2,032 mm (0,08 pollici), MBA (confezione da 2) / Belts
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.19 AUD
$5.19 AUD
Per 2
50
Nr. 		101.6
mm 		3.2
mm 		Cinghia dentata da 50 denti, larghezza 3,2 mm, poliuretano imperiale con corde in poliestere, arancione, passo trapezoidale MXL da 2,032 mm (0,08 pollici), MBA (confezione da 2)
Material: Polyurethane with Polyester Cords    Reinforcement: Polyester    Appearance: Orange    Breaking Strength: 178 N    Min Temperature: -18 Deg C    Max Temperature: 66 Deg C    Tooth Angle (A): 60 Deg.   
Part Number: Cinghia dentata da 50 denti, larghezza 3,2 mm, poliuretano imperiale con corde in poliestere, arancione, passo trapezoidale MXL da 2,032 mm (0,08 pollici), MBA (confezione da 2) Cinghia dentata da 50 denti, larghezza 3,2 mm, poliuretano imperiale con corde in poliestere, arancione, passo trapezoidale MXL da 2,032 mm (0,08 pollici), MBA (confezione da 2) / Belts
1 pack (2 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.19 AUD
$5.19 AUD
Per 2
52
Nr. 		105.664
mm 		3.2
mm 		Fibreglass
 Black
 1164249 | B-MXL-0052-0032-NFB --- Belts - 52 Teeth x 105.664 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0052-0032-NFB Belts - 52 Teeth x 105.664 mm x 3.2 mm
14 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
52
Nr. 		105.664
mm 		3.2
mm 		1164249 | B-MXL-0052-0032-NFB --- Belts - 52 Teeth x 105.664 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0052-0032-NFB Belts - 52 Teeth x 105.664 mm x 3.2 mm
14 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
53
Nr. 		107.696
mm 		3.2
mm 		Fibreglass
 Black
 1164592 | B-MXL-0053-0032-NFB --- Belts - 53 Teeth x 107.696 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0053-0032-NFB Belts - 53 Teeth x 107.696 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
53
Nr. 		107.696
mm 		3.2
mm 		1164592 | B-MXL-0053-0032-NFB --- Belts - 53 Teeth x 107.696 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0053-0032-NFB Belts - 53 Teeth x 107.696 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
54
Nr. 		109.728
mm 		3.2
mm 		Fibreglass
 Black
 1165089 | B-MXL-0054-0032-NFB --- Belts - 54 Teeth x 109.728 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0054-0032-NFB Belts - 54 Teeth x 109.728 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.59 AUD
$6.59 AUD
Each
54
Nr. 		109.728
mm 		3.2
mm 		1165089 | B-MXL-0054-0032-NFB --- Belts - 54 Teeth x 109.728 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0054-0032-NFB Belts - 54 Teeth x 109.728 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.59 AUD
$6.59 AUD
Each
55
Nr. 		111.76
mm 		3.2
mm 		Fibreglass
 Black
 Cinghia dentata 55 denti larghezza 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 55 denti larghezza 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 55 denti larghezza 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
55
Nr. 		111.76
mm 		3.2
mm 		Cinghia dentata 55 denti larghezza 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 55 denti larghezza 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 55 denti larghezza 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
56
Nr. 		113.792
mm 		3.2
mm 		Fibreglass
 Black
 1166663 | B-MXL-0056-0032-NFB --- Belts - 56 Teeth x 113.792 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0056-0032-NFB Belts - 56 Teeth x 113.792 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
56
Nr. 		113.792
mm 		3.2
mm 		1166663 | B-MXL-0056-0032-NFB --- Belts - 56 Teeth x 113.792 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0056-0032-NFB Belts - 56 Teeth x 113.792 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
57
Nr. 		115.824
mm 		3.2
mm 		Fibreglass
 Black
 1167075 | B-MXL-0057-0032-NFB --- Belts - 57 Teeth x 115.824 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0057-0032-NFB Belts - 57 Teeth x 115.824 mm x 3.2 mm
8 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
57
Nr. 		115.824
mm 		3.2
mm 		1167075 | B-MXL-0057-0032-NFB --- Belts - 57 Teeth x 115.824 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0057-0032-NFB Belts - 57 Teeth x 115.824 mm x 3.2 mm
8 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
58
Nr. 		117.856
mm 		3.2
mm 		Fibreglass
 Black
 1167573 | B-MXL-0058-0032-NFB --- Belts - 58 Teeth x 117.856 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0058-0032-NFB Belts - 58 Teeth x 117.856 mm x 3.2 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.59 AUD
$6.59 AUD
Each
58
Nr. 		117.856
mm 		3.2
mm 		1167573 | B-MXL-0058-0032-NFB --- Belts - 58 Teeth x 117.856 mm x 3.2 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: B-MXL-0058-0032-NFB Belts - 58 Teeth x 117.856 mm x 3.2 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.59 AUD
$6.59 AUD
Each
59
Nr. 		119.888
mm 		3.2
mm 		Fibreglass
 Black
 Cinghia dentata 59 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 59 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 59 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
59
Nr. 		119.888
mm 		3.2
mm 		Cinghia dentata 59 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 59 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 59 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$6.68 AUD
$6.68 AUD
Each
60
Nr. 		121.92
mm 		3.2
mm 		Fibreglass
 Black
 Cinghia dentata da 60 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata da 60 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata da 60 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
7 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$7.14 AUD
$7.14 AUD
Each
60
Nr. 		121.92
mm 		3.2
mm 		Cinghia dentata da 60 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata da 60 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata da 60 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
7 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$7.14 AUD
$7.14 AUD
Each
61
Nr. 		123.952
mm 		3.2
mm 		Fibreglass
 Black
 Cinghia dentata 61 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 61 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 61 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
8 Available
| Backorders for more can be expected around Sun, Jan 19, 2025
$7.14 AUD
$7.14 AUD
Each
61
Nr. 		123.952
mm 		3.2
mm 		Cinghia dentata 61 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 229 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 40 Deg.   
Part Number: Cinghia dentata 61 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) Cinghia dentata 61 denti larga 3,2 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale MXL da 2,032 mm (0,08 pollici) - MBA (confezione da 1) / Belts
8 Available
| | Backorders for more can be expected around Sun, Jan 19, 2025
$7.14 AUD
$7.14 AUD
Each