Bearings - Linear Ball - Standard Closed - Stainless Steel

4 Products in this selection
  • Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.
  • Use with hardened precision ground shafting.
  • Shaft tolerance: h6 (Normal Fit), j6 (Close Fit).
  • Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit).
  • Max Temp: 100 oC Intermittent, 80 Deg C continuous.
Nom. Shaft Size (T) Nom. Outer Diameter (D) Length ( L / l ) Dynamic Load Static Load Wiper Configuration Indicative
Image
6.350
mm 		12.700
mm 		19.050 / 13.081
mm 		84.5
N 		Cuscinetto lineare 6,35 x 12,7 - 19,05 / 13,081 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1)
Material: Stainless Steel AISI 440C    Groove Width (W1): 0.991 mm    Ball Cicuits (Nr.): 3   
Part Number: Cuscinetto lineare 6,35 x 12,7 - 19,05 / 13,081 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) Cuscinetto lineare 6,35 x 12,7 - 19,05 / 13,081 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) / Bearings
Out of Stock | Backorder Now | Backorders for more can be expected around Sun, Feb 02, 2025
$119.23 AUD
$119.23 AUD
Each
View the product page first if you are unsure ->
Nom. Shaft Size (T) Nom. Outer Diameter (D) Length ( L / l ) Dynamic Load Indicative
Image
6.350
mm 		12.700
mm 		19.050 / 13.081
mm 		84.5
N 		Cuscinetto lineare 6,35 x 12,7 - 19,05 / 13,081 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1)
Material: Stainless Steel AISI 440C    Groove Width (W1): 0.991 mm    Ball Cicuits (Nr.): 3   
Part Number: Cuscinetto lineare 6,35 x 12,7 - 19,05 / 13,081 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) Cuscinetto lineare 6,35 x 12,7 - 19,05 / 13,081 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) / Bearings
Out of Stock | Backorder Now | Backorders for more can be expected around Sun, Feb 02, 2025
$119.23 AUD
$119.23 AUD
Each
View the product page first if you are unsure.
9.525
mm 		15.875
mm 		22.225 / 16.256
mm 		164.6
N 		Cuscinetto lineare 9,525 x 15,875 - 22,225 / 16,256 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1)
Material: Stainless Steel AISI 440C    Groove Width (W1): 0.991 mm    Ball Cicuits (Nr.): 4   
Part Number: Cuscinetto lineare 9,525 x 15,875 - 22,225 / 16,256 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) Cuscinetto lineare 9,525 x 15,875 - 22,225 / 16,256 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) / Bearings
Out of Stock | Backorder Now | Backorders for more can be expected around Sun, Feb 02, 2025
$213.05 AUD
$213.05 AUD
Each
View the product page first if you are unsure ->
9.525
mm 		15.875
mm 		22.225 / 16.256
mm 		164.6
N 		Cuscinetto lineare 9,525 x 15,875 - 22,225 / 16,256 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1)
Material: Stainless Steel AISI 440C    Groove Width (W1): 0.991 mm    Ball Cicuits (Nr.): 4   
Part Number: Cuscinetto lineare 9,525 x 15,875 - 22,225 / 16,256 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) Cuscinetto lineare 9,525 x 15,875 - 22,225 / 16,256 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) / Bearings
Out of Stock | Backorder Now | Backorders for more can be expected around Sun, Feb 02, 2025
$213.05 AUD
$213.05 AUD
Each
View the product page first if you are unsure.
12.700
mm 		22.225
mm 		31.750 / 24.562
mm 		378.1
N 		Cuscinetto lineare 12,7 x 22,225 - 31,750 / 24,562 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1)
Material: Stainless Steel AISI 440C    Groove Width (W1): 1.168 mm    Ball Cicuits (Nr.): 4   
Part Number: Cuscinetto lineare 12,7 x 22,225 - 31,750 / 24,562 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) Cuscinetto lineare 12,7 x 22,225 - 31,750 / 24,562 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) / Bearings
Out of Stock | Backorder Now | Backorders for more can be expected around Sun, Feb 02, 2025
$226.59 AUD
$226.59 AUD
Each
View the product page first if you are unsure ->
12.700
mm 		22.225
mm 		31.750 / 24.562
mm 		378.1
N 		Cuscinetto lineare 12,7 x 22,225 - 31,750 / 24,562 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1)
Material: Stainless Steel AISI 440C    Groove Width (W1): 1.168 mm    Ball Cicuits (Nr.): 4   
Part Number: Cuscinetto lineare 12,7 x 22,225 - 31,750 / 24,562 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) Cuscinetto lineare 12,7 x 22,225 - 31,750 / 24,562 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) / Bearings
Out of Stock | Backorder Now | Backorders for more can be expected around Sun, Feb 02, 2025
$226.59 AUD
$226.59 AUD
Each
View the product page first if you are unsure.
19.050
mm 		31.496
mm 		41.275 / 29.312
mm 		889.6
N 		Cuscinetto lineare 19,05 x 31,496 - 41,275 / 29,312 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1)
Material: Stainless Steel AISI 440C    Groove Width (W1): 1.422 mm    Ball Cicuits (Nr.): 5   
Part Number: Cuscinetto lineare 19,05 x 31,496 - 41,275 / 29,312 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) Cuscinetto lineare 19,05 x 31,496 - 41,275 / 29,312 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) / Bearings
Out of Stock | Backorder Now | Backorders for more can be expected around Sun, Feb 02, 2025
$173.05 AUD
$173.05 AUD
Each
View the product page first if you are unsure ->
19.050
mm 		31.496
mm 		41.275 / 29.312
mm 		889.6
N 		Cuscinetto lineare 19,05 x 31,496 - 41,275 / 29,312 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1)
Material: Stainless Steel AISI 440C    Groove Width (W1): 1.422 mm    Ball Cicuits (Nr.): 5   
Part Number: Cuscinetto lineare 19,05 x 31,496 - 41,275 / 29,312 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) Cuscinetto lineare 19,05 x 31,496 - 41,275 / 29,312 mm - Grado inossidabile 440C chiuso - MBA (confezione da 1) / Bearings
Out of Stock | Backorder Now | Backorders for more can be expected around Sun, Feb 02, 2025
$173.05 AUD
$173.05 AUD
Each
View the product page first if you are unsure.