Washers - Self Aligning - Components - Hardened Steel

10 Products in this selection
  • Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.
  • Case Hardened steel 9 S Mn Pb 28 K DIN 6319.
  • Order a base washer and an aligning washer to make a complete unit.
  • Max Shaft Size Shown will allow 3o of misalignment.
  • DIN 6319-G washers are used for clamping mechanical parts with non-parallel surfaces.
  • Designed for screw solidity in compliance with 8.8. Limited for use on flat closed ring areas - not for elongated holes.
Additional resources:
Screws
Suits Shaft or Bolt Size Bore Size (d1 or d2) OD (d3) Thickness (h2 or h3) Overall Thickness (h4) Radius (r) Indicative
Image
8.00
mm 		8.4
mm 		17.00
mm 		3.2
mm 		5.0
mm 		12.0
mm 		1081300 | W0080-ALN-CA --- Washers - 8 mm x 8.4 mm x 17 mm
Material: Hardened Steel    Static Load Rating: 17 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 8 mm    Standard: DIN 6319C   
Part Number: W0080-ALN-CA Washers - 8 mm x 8.4 mm x 17 mm
6 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$3.80 AUD $2.00 AUD
Each
Suits Shaft or Bolt Size Bore Size (d1 or d2) OD (d3) Thickness (h2 or h3) Indicative
Image
8.00
mm 		8.4
mm 		17.00
mm 		3.2
mm 		1081300 | W0080-ALN-CA --- Washers - 8 mm x 8.4 mm x 17 mm
Material: Hardened Steel    Overall Thickness (h4): 5.0 mm    Radius (r): 12.0 mm    Static Load Rating: 17 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 8 mm    Standard: DIN 6319C   
Part Number: W0080-ALN-CA Washers - 8 mm x 8.4 mm x 17 mm
6 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$3.80 AUD $2.00 AUD
Each
8.00
mm 		9.6
mm 		17.00
mm 		3.5
mm 		5.0
mm 		1081361 | W0080-ALN-CB --- Washers - 8 mm x 9.6 mm x 17 mm
Material: Hardened Steel    Static Load Rating: 17 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 8 mm    Standard: DIN 6319D   
Part Number: W0080-ALN-CB Washers - 8 mm x 9.6 mm x 17 mm
10 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$2.00 AUD
$2.00 AUD
Each
8.00
mm 		9.6
mm 		17.00
mm 		3.5
mm 		1081361 | W0080-ALN-CB --- Washers - 8 mm x 9.6 mm x 17 mm
Material: Hardened Steel    Overall Thickness (h4): 5.0 mm    Static Load Rating: 17 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 8 mm    Standard: DIN 6319D   
Part Number: W0080-ALN-CB Washers - 8 mm x 9.6 mm x 17 mm
10 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$2.00 AUD
$2.00 AUD
Each
10.00
mm 		12
mm 		30.00
mm 		5.0
mm 		7.1
mm 		1091935 | W0100-ALN-CBH (5 Pcs) --- Washers - 10 mm x 12 mm x 30 mm
Material: Hardened Steel    Static Load Rating: 26 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 10 mm    Standard: DIN 6319G   
Part Number: W0100-ALN-CBH (5 Pcs) Washers - 10 mm x 12 mm x 30 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$20.23 AUD
$20.23 AUD
Per 5
10.00
mm 		12
mm 		30.00
mm 		5.0
mm 		1091935 | W0100-ALN-CBH (5 Pcs) --- Washers - 10 mm x 12 mm x 30 mm
Material: Hardened Steel    Overall Thickness (h4): 7.1 mm    Static Load Rating: 26 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 10 mm    Standard: DIN 6319G   
Part Number: W0100-ALN-CBH (5 Pcs) Washers - 10 mm x 12 mm x 30 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$20.23 AUD
$20.23 AUD
Per 5
20.00
mm 		21
mm 		36.00
mm 		6.3
mm 		11.5
mm 		27.0
mm 		1124216 | W0200-ALN-CA --- Washers - 20 mm x 21 mm x 36 mm
Material: Hardened Steel    Static Load Rating: 117 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 20 mm    Standard: DIN 6319C   
Part Number: W0200-ALN-CA Washers - 20 mm x 21 mm x 36 mm
5 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.88 AUD
$4.88 AUD
Each
20.00
mm 		21
mm 		36.00
mm 		6.3
mm 		1124216 | W0200-ALN-CA --- Washers - 20 mm x 21 mm x 36 mm
Material: Hardened Steel    Overall Thickness (h4): 11.5 mm    Radius (r): 27.0 mm    Static Load Rating: 117 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 20 mm    Standard: DIN 6319C   
Part Number: W0200-ALN-CA Washers - 20 mm x 21 mm x 36 mm
5 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$4.88 AUD
$4.88 AUD
Each
20.00
mm 		23.2
mm 		36.00
mm 		7.5
mm 		11.5
mm 		1124383 | W0200-ALN-CB --- Washers - 20 mm x 23.2 mm x 36 mm
Material: Hardened Steel    Static Load Rating: 117 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 20 mm    Standard: DIN 6319D   
Part Number: W0200-ALN-CB Washers - 20 mm x 23.2 mm x 36 mm
5 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.10 AUD
$5.10 AUD
Each
20.00
mm 		23.2
mm 		36.00
mm 		7.5
mm 		1124383 | W0200-ALN-CB --- Washers - 20 mm x 23.2 mm x 36 mm
Material: Hardened Steel    Overall Thickness (h4): 11.5 mm    Static Load Rating: 117 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 20 mm    Standard: DIN 6319D   
Part Number: W0200-ALN-CB Washers - 20 mm x 23.2 mm x 36 mm
5 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$5.10 AUD
$5.10 AUD
Each
24.00
mm 		25
mm 		44.00
mm 		8.2
mm 		15.0
mm 		32.0
mm 		1131134 | W0240-ALN-CA --- Washers - 24 mm x 25 mm x 44 mm
Material: Hardened Steel    Static Load Rating: 168 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 24 mm    Standard: DIN 6319C   
Part Number: W0240-ALN-CA Washers - 24 mm x 25 mm x 44 mm
3 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
24.00
mm 		25
mm 		44.00
mm 		8.2
mm 		1131134 | W0240-ALN-CA --- Washers - 24 mm x 25 mm x 44 mm
Material: Hardened Steel    Overall Thickness (h4): 15.0 mm    Radius (r): 32.0 mm    Static Load Rating: 168 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 24 mm    Standard: DIN 6319C   
Part Number: W0240-ALN-CA Washers - 24 mm x 25 mm x 44 mm
3 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each
24.00
mm 		28
mm 		44.00
mm 		9.5
mm 		15.0
mm 		1131226 | W0240-ALN-CB --- Washers - 24 mm x 28 mm x 44 mm
Material: Hardened Steel    Static Load Rating: 168 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 24 mm    Standard: DIN 6319D   
Part Number: W0240-ALN-CB Washers - 24 mm x 28 mm x 44 mm
3 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$10.00 AUD
Each
24.00
mm 		28
mm 		44.00
mm 		9.5
mm 		1131226 | W0240-ALN-CB --- Washers - 24 mm x 28 mm x 44 mm
Material: Hardened Steel    Overall Thickness (h4): 15.0 mm    Static Load Rating: 168 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 24 mm    Standard: DIN 6319D   
Part Number: W0240-ALN-CB Washers - 24 mm x 28 mm x 44 mm
3 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$10.00 AUD
$10.00 AUD
Each
36.00
mm 		37
mm 		68.00
mm 		14.0
mm 		23.0
mm 		50.0
mm 		1149532 | W0360-ALN-CA (5 Pcs) --- Washers - 36 mm x 37 mm x 68 mm
Material: Hardened Steel    Static Load Rating: 394 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 36 mm    Standard: DIN 6319C   
Part Number: W0360-ALN-CA (5 Pcs) Washers - 36 mm x 37 mm x 68 mm
1 pack (5 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$63.34 AUD
$63.34 AUD
Per 5
36.00
mm 		37
mm 		68.00
mm 		14.0
mm 		1149532 | W0360-ALN-CA (5 Pcs) --- Washers - 36 mm x 37 mm x 68 mm
Material: Hardened Steel    Overall Thickness (h4): 23.0 mm    Radius (r): 50.0 mm    Static Load Rating: 394 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 36 mm    Standard: DIN 6319C   
Part Number: W0360-ALN-CA (5 Pcs) Washers - 36 mm x 37 mm x 68 mm
1 pack (5 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$63.34 AUD
$63.34 AUD
Per 5
42.00
mm 		43
mm 		78.00
mm 		17.0
mm 		29.0
mm 		58.0
mm 		1155698 | W0420-ALN-CA --- Washers - 42 mm x 43 mm x 78 mm
Material: Hardened Steel    Static Load Rating: 542 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 42 mm    Standard: DIN 6319C   
Part Number: W0420-ALN-CA Washers - 42 mm x 43 mm x 78 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$42.00 AUD
$69.30 AUD $42.00 AUD
Each
42.00
mm 		43
mm 		78.00
mm 		17.0
mm 		1155698 | W0420-ALN-CA --- Washers - 42 mm x 43 mm x 78 mm
Material: Hardened Steel    Overall Thickness (h4): 29.0 mm    Radius (r): 58.0 mm    Static Load Rating: 542 Max. kN    Type: Washer A (Aligning)    Actual ID (Ref): 42 mm    Standard: DIN 6319C   
Part Number: W0420-ALN-CA Washers - 42 mm x 43 mm x 78 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$42.00 AUD
$69.30 AUD $42.00 AUD
Each
42.00
mm 		49
mm 		78.00
mm 		18.0
mm 		29.0
mm 		1155744 | W0420-ALN-CB --- Washers - 42 mm x 49 mm x 78 mm
Material: Hardened Steel    Static Load Rating: 542 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 42 mm    Standard: DIN 6319D   
Part Number: W0420-ALN-CB Washers - 42 mm x 49 mm x 78 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$42.00 AUD
$69.30 AUD $42.00 AUD
Each
42.00
mm 		49
mm 		78.00
mm 		18.0
mm 		1155744 | W0420-ALN-CB --- Washers - 42 mm x 49 mm x 78 mm
Material: Hardened Steel    Overall Thickness (h4): 29.0 mm    Static Load Rating: 542 Max. kN    Type: Washer B (Base)    Actual ID (Ref): 42 mm    Standard: DIN 6319D   
Part Number: W0420-ALN-CB Washers - 42 mm x 49 mm x 78 mm
2 Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$42.00 AUD
$69.30 AUD $42.00 AUD
Each