Tools - Threading - Hand Taps

144 Products in this selection
This is a combined category of Hand Taps Threading Tools.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Assortment Kits
A more concise listing may be found on the Smallparts store at Tools - Threading - Hand Taps. Smallparts promote the most popular MBA products.
Thread Size Pitch in mm / Threads Per Inch Type Indicative
Image
Thread Size
3/8-16 UNC (9.53mm)
Pitch in mm / Threads Per Inch
1.588 mm / 16 TPI
Type
Bottoming
Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-P Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Bottoming - Carbon Steel
3 Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size Pitch in mm / Threads Per Inch Type Indicative
Image
Thread Size
3/8-16 UNC (9.53mm)
Pitch in mm / Threads Per Inch
1.588 mm / 16 TPI
Type
Bottoming
Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-P Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Bottoming - Carbon Steel
3 Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-16 UNC (9.53mm)
Pitch in mm / Threads Per Inch
1.588 mm / 16 TPI
Type
Intermediate
Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-I Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Intermediate - Carbon Steel
5 Available Immediately | Item Discontinued - Up to 5 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-16 UNC (9.53mm)
Pitch in mm / Threads Per Inch
1.588 mm / 16 TPI
Type
Intermediate
Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-I Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Intermediate - Carbon Steel
5 Available Immediately | Item Discontinued - Up to 5 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-16 UNC (9.53mm)
Pitch in mm / Threads Per Inch
1.588 mm / 16 TPI
Type
Taper
Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-T Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Taper - Carbon Steel
5 Available Immediately | Item Discontinued - Up to 5 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-16 UNC (9.53mm)
Pitch in mm / Threads Per Inch
1.588 mm / 16 TPI
Type
Taper
Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-T Threading Tools - 3/8-16 UNC -9.53mm- 1.588 mm / 16 TPI - Taper - Carbon Steel
5 Available Immediately | Item Discontinued - Up to 5 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-24 UNF (9.53mm)
Pitch in mm / Threads Per Inch
1.058 mm / 24 TPI
Type
Bottoming
Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-P Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Bottoming - Carbon Steel
4 Available Immediately | Item Discontinued - Up to 4 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-24 UNF (9.53mm)
Pitch in mm / Threads Per Inch
1.058 mm / 24 TPI
Type
Bottoming
Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-P Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Bottoming - Carbon Steel
4 Available Immediately | Item Discontinued - Up to 4 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-24 UNF (9.53mm)
Pitch in mm / Threads Per Inch
1.058 mm / 24 TPI
Type
Intermediate
Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-I Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Intermediate - Carbon Steel
4 Available Immediately | Item Discontinued - Up to 4 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-24 UNF (9.53mm)
Pitch in mm / Threads Per Inch
1.058 mm / 24 TPI
Type
Intermediate
Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-I Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Intermediate - Carbon Steel
4 Available Immediately | Item Discontinued - Up to 4 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-24 UNF (9.53mm)
Pitch in mm / Threads Per Inch
1.058 mm / 24 TPI
Type
Taper
Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-T Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Taper - Carbon Steel
4 Available Immediately | Item Discontinued - Up to 4 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
3/8-24 UNF (9.53mm)
Pitch in mm / Threads Per Inch
1.058 mm / 24 TPI
Type
Taper
Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-T Threading Tools - 3/8-24 UNF -9.53mm- 1.058 mm / 24 TPI - Taper - Carbon Steel
4 Available Immediately | Item Discontinued - Up to 4 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M10 (10x1.5mm)
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Bottoming
Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.50 mm    mm: 8.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-P Threading Tools - M10 - 10x1.5mm - 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
2 Available Immediately | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M10 (10x1.5mm)
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Bottoming
Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.50 mm    mm: 8.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-P Threading Tools - M10 - 10x1.5mm - 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
2 Available Immediately | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M10 (10x1.5mm)
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Intermediate
Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.50 mm    mm: 8.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-I Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Intermediate - Carbon Steel
4 Available Immediately | Item Discontinued - Up to 4 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M10 (10x1.5mm)
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Intermediate
Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.50 mm    mm: 8.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-I Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Intermediate - Carbon Steel
4 Available Immediately | Item Discontinued - Up to 4 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M10 (10x1.5mm)
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Taper
Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.50 mm    mm: 8.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-T Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Taper - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.00 AUD
$11.40 AUD $6.00 AUD
Each
Thread Size
M10 (10x1.5mm)
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Taper
Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 8.50 mm    mm: 8.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-T Threading Tools - M10 -10x1.5mm- 1.500 mm / 16.93 TPI - Taper - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.00 AUD
$11.40 AUD $6.00 AUD
Each
Thread Size
M11x1.5
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Bottoming
Threading Tools - M11x1.5 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 9.40 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-110M-P Threading Tools - M11x1.5 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Thread Size
M11x1.5
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Bottoming
Threading Tools - M11x1.5 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 9.40 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-110M-P Threading Tools - M11x1.5 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Thread Size
M12 (12x1.75mm)
Pitch in mm / Threads Per Inch
1.750 mm / 14.51 TPI
Type
Bottoming
Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.20 mm    mm: 7.10   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-P Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Bottoming - Carbon Steel
2 Available Immediately | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M12 (12x1.75mm)
Pitch in mm / Threads Per Inch
1.750 mm / 14.51 TPI
Type
Bottoming
Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.20 mm    mm: 7.10   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-P Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Bottoming - Carbon Steel
2 Available Immediately | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M12 (12x1.75mm)
Pitch in mm / Threads Per Inch
1.750 mm / 14.51 TPI
Type
Intermediate
Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.20 mm    mm: 7.10   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-I Threading Tools - M12 - 12x1.75mm - 1.750 mm / 14.51 TPI - Intermediate - Carbon Steel
3 Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M12 (12x1.75mm)
Pitch in mm / Threads Per Inch
1.750 mm / 14.51 TPI
Type
Intermediate
Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.20 mm    mm: 7.10   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-I Threading Tools - M12 - 12x1.75mm - 1.750 mm / 14.51 TPI - Intermediate - Carbon Steel
3 Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M12 (12x1.75mm)
Pitch in mm / Threads Per Inch
1.750 mm / 14.51 TPI
Type
Taper
Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.20 mm    mm: 7.10   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-T (2 Pcs) Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Taper - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$14.00 AUD
$26.60 AUD $14.00 AUD
Per 2
Thread Size
M12 (12x1.75mm)
Pitch in mm / Threads Per Inch
1.750 mm / 14.51 TPI
Type
Taper
Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.20 mm    mm: 7.10   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-T (2 Pcs) Threading Tools - M12 -12x1.75mm- 1.750 mm / 14.51 TPI - Taper - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$14.00 AUD
$26.60 AUD $14.00 AUD
Per 2
Thread Size
1/2-13 UNC (12.7mm)
Pitch in mm / Threads Per Inch
1.954 mm / 13 TPI
Type
Bottoming
Threading Tools - 1/2-13 UNC -12.7mm- 1.954 mm / 13 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.80 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-127C-P Threading Tools - 1/2-13 UNC -12.7mm- 1.954 mm / 13 TPI - Bottoming - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Thread Size
1/2-13 UNC (12.7mm)
Pitch in mm / Threads Per Inch
1.954 mm / 13 TPI
Type
Bottoming
Threading Tools - 1/2-13 UNC -12.7mm- 1.954 mm / 13 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.80 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-127C-P Threading Tools - 1/2-13 UNC -12.7mm- 1.954 mm / 13 TPI - Bottoming - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Thread Size
1/2-13 UNC (12.7mm)
Pitch in mm / Threads Per Inch
1.954 mm / 13 TPI
Type
Taper
Threading Tools - 1/2-13 UNC -12.7mm- 1.954 mm / 13 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.80 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-127C-T Threading Tools - 1/2-13 UNC -12.7mm- 1.954 mm / 13 TPI - Taper - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Thread Size
1/2-13 UNC (12.7mm)
Pitch in mm / Threads Per Inch
1.954 mm / 13 TPI
Type
Taper
Threading Tools - 1/2-13 UNC -12.7mm- 1.954 mm / 13 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 10.80 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-127C-T Threading Tools - 1/2-13 UNC -12.7mm- 1.954 mm / 13 TPI - Taper - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Thread Size
M14 (14x2mm)
Pitch in mm / Threads Per Inch
2.000 mm / 12.7 TPI
Type
Bottoming
Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.00 mm    mm: 9.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-P (2 Pcs) Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Bottoming - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 2
Thread Size
M14 (14x2mm)
Pitch in mm / Threads Per Inch
2.000 mm / 12.7 TPI
Type
Bottoming
Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.00 mm    mm: 9.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-P (2 Pcs) Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Bottoming - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 2
Thread Size
M14 (14x2mm)
Pitch in mm / Threads Per Inch
2.000 mm / 12.7 TPI
Type
Intermediate
Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.00 mm    mm: 9.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-I Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Intermediate - Carbon Steel
3 Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M14 (14x2mm)
Pitch in mm / Threads Per Inch
2.000 mm / 12.7 TPI
Type
Intermediate
Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.00 mm    mm: 9.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-I Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Intermediate - Carbon Steel
3 Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M14 (14x2mm)
Pitch in mm / Threads Per Inch
2.000 mm / 12.7 TPI
Type
Taper
Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.00 mm    mm: 9.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-T (2 Pcs) Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Taper - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 2
Thread Size
M14 (14x2mm)
Pitch in mm / Threads Per Inch
2.000 mm / 12.7 TPI
Type
Taper
Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.00 mm    mm: 9.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-T (2 Pcs) Threading Tools - M14 -14x2mm- 2.000 mm / 12.7 TPI - Taper - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 2
Thread Size
9/16-12 UNC (14.29mm)
Pitch in mm / Threads Per Inch
2.117 mm / 12 TPI
Type
Intermediate
Threading Tools - 9/16-12 UNC -14.29mm- 2.117 mm / 12 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-143C-I Threading Tools - 9/16-12 UNC -14.29mm- 2.117 mm / 12 TPI - Intermediate - Carbon Steel
2 Available Immediately | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
9/16-12 UNC (14.29mm)
Pitch in mm / Threads Per Inch
2.117 mm / 12 TPI
Type
Intermediate
Threading Tools - 9/16-12 UNC -14.29mm- 2.117 mm / 12 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-143C-I Threading Tools - 9/16-12 UNC -14.29mm- 2.117 mm / 12 TPI - Intermediate - Carbon Steel
2 Available Immediately | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
9/16-12 UNC (14.29mm)
Pitch in mm / Threads Per Inch
2.117 mm / 12 TPI
Type
Taper
Threading Tools - 9/16-12 UNC -14.29mm- 2.117 mm / 12 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-143C-T Threading Tools - 9/16-12 UNC -14.29mm- 2.117 mm / 12 TPI - Taper - Carbon Steel
2 Available Immediately | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
9/16-12 UNC (14.29mm)
Pitch in mm / Threads Per Inch
2.117 mm / 12 TPI
Type
Taper
Threading Tools - 9/16-12 UNC -14.29mm- 2.117 mm / 12 TPI - Taper - Carbon Steel
Material: Carbon Steel    Drill Size Range: 12.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-143C-T Threading Tools - 9/16-12 UNC -14.29mm- 2.117 mm / 12 TPI - Taper - Carbon Steel
2 Available Immediately | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M16 Extra Fine (16x1.5mm)
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Bottoming
Threading Tools - M16 Extra Fine -16x1.5mm- 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 14.60 - 14.90 mm    mm: 10.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-160M-150-P (2 Pcs) Threading Tools - M16 Extra Fine -16x1.5mm- 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$24.00 AUD
$45.60 AUD $24.00 AUD
Per 2
Thread Size
M16 Extra Fine (16x1.5mm)
Pitch in mm / Threads Per Inch
1.500 mm / 16.93 TPI
Type
Bottoming
Threading Tools - M16 Extra Fine -16x1.5mm- 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 14.60 - 14.90 mm    mm: 10.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-160M-150-P (2 Pcs) Threading Tools - M16 Extra Fine -16x1.5mm- 1.500 mm / 16.93 TPI - Bottoming - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$24.00 AUD
$45.60 AUD $24.00 AUD
Per 2
Thread Size
M16 (16x2mm)
Pitch in mm / Threads Per Inch
2.000 mm / 12.7 TPI
Type
Intermediate
Threading Tools - M16 -16x2mm- 2.000 mm / 12.7 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 14.00 - 14.50 mm    mm: 10.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-160M-I Threading Tools - M16 -16x2mm- 2.000 mm / 12.7 TPI - Intermediate - Carbon Steel
3 Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M16 (16x2mm)
Pitch in mm / Threads Per Inch
2.000 mm / 12.7 TPI
Type
Intermediate
Threading Tools - M16 -16x2mm- 2.000 mm / 12.7 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 14.00 - 14.50 mm    mm: 10.00   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-160M-I Threading Tools - M16 -16x2mm- 2.000 mm / 12.7 TPI - Intermediate - Carbon Steel
3 Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Thread Size
M18 (18x2.5mm)
Pitch in mm / Threads Per Inch
2.500 mm / 10.16 TPI
Type
Bottoming
Threading Tools - M18 -18x2.5mm- 2.500 mm / 10.16 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 15.50 mm    mm: 11.20   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-180M-P Threading Tools - M18 -18x2.5mm- 2.500 mm / 10.16 TPI - Bottoming - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$15.00 AUD
$28.50 AUD $15.00 AUD
Each
Thread Size
M18 (18x2.5mm)
Pitch in mm / Threads Per Inch
2.500 mm / 10.16 TPI
Type
Bottoming
Threading Tools - M18 -18x2.5mm- 2.500 mm / 10.16 TPI - Bottoming - Carbon Steel
Material: Carbon Steel    Drill Size Range: 15.50 mm    mm: 11.20   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-180M-P Threading Tools - M18 -18x2.5mm- 2.500 mm / 10.16 TPI - Bottoming - Carbon Steel
1 Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$15.00 AUD
$28.50 AUD $15.00 AUD
Each
Thread Size
M18 (18x2.5mm)
Pitch in mm / Threads Per Inch
2.500 mm / 10.16 TPI
Type
Intermediate
Threading Tools - M18 -18x2.5mm- 2.500 mm / 10.16 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 15.50 mm    mm: 11.20   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-180M-I (2 Pcs) Threading Tools - M18 -18x2.5mm- 2.500 mm / 10.16 TPI - Intermediate - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$30.00 AUD
$57.00 AUD $30.00 AUD
Per 2
Thread Size
M18 (18x2.5mm)
Pitch in mm / Threads Per Inch
2.500 mm / 10.16 TPI
Type
Intermediate
Threading Tools - M18 -18x2.5mm- 2.500 mm / 10.16 TPI - Intermediate - Carbon Steel
Material: Carbon Steel    Drill Size Range: 15.50 mm    mm: 11.20   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-180M-I (2 Pcs) Threading Tools - M18 -18x2.5mm- 2.500 mm / 10.16 TPI - Intermediate - Carbon Steel
1 pack (2 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$30.00 AUD
$57.00 AUD $30.00 AUD
Per 2