Shafting - Pre Drilled and Tapped

8 Products in this selection
This is a combined category of Pre Drilled and Tapped Shafting.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Drill Rod
A more concise listing may be found on the Smallparts store at Shafting - Pre Drilled and Tapped. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Material Thread Size Hole Pitch (P) Surface Finish Indicative
Image
12.700
mm
- 0.010 / - 0.030 		609.6
mm 		440C Case Hardened Stainless
101.6
0.30 um
Microns 		1105252 | 0R-0127-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$413.68 AUD
$413.68 AUD
Each
Diameter (D) Length (L) Material Thread Size Indicative
Image
12.700
mm
- 0.010 / - 0.030 		609.6
mm 		440C Case Hardened Stainless
1105252 | 0R-0127-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$413.68 AUD
$413.68 AUD
Each
View the product page first if you are unsure.
15.875
mm
- 0.010 / - 0.030 		101.6
mm 		440C Case Hardened Stainless
101.6
0.30 um
Microns 		1112689 | 0R-0159-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$2,312.41 AUD
$2,312.41 AUD
Each
15.875
mm
- 0.010 / - 0.030 		101.6
mm 		440C Case Hardened Stainless
1112689 | 0R-0159-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$2,312.41 AUD
$2,312.41 AUD
Each
View the product page first if you are unsure.
15.875
mm
- 0.010 / - 0.030 		609.6
mm 		440C Case Hardened Stainless
101.6
0.30 um
Microns 		1112854 | 0R-0159-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$461.95 AUD
$461.95 AUD
Each
15.875
mm
- 0.010 / - 0.030 		609.6
mm 		440C Case Hardened Stainless
1112854 | 0R-0159-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$461.95 AUD
$461.95 AUD
Each
View the product page first if you are unsure.
19.050
mm
- 0.010 / - 0.030 		152.4
mm 		440C Case Hardened Stainless
152.4
0.30 um
Microns 		1122404 | 0R-0191-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$2,405.32 AUD
$2,405.32 AUD
Each
19.050
mm
- 0.010 / - 0.030 		152.4
mm 		440C Case Hardened Stainless
1122404 | 0R-0191-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$2,405.32 AUD
$2,405.32 AUD
Each
View the product page first if you are unsure.
19.050
mm
- 0.010 / - 0.030 		610
mm 		440C Case Hardened Stainless
152.4
0.30 um
Microns 		1122548 | 0R-0191-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$805.41 AUD
$805.41 AUD
Each
19.050
mm
- 0.010 / - 0.030 		610
mm 		440C Case Hardened Stainless
1122548 | 0R-0191-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$805.41 AUD
$805.41 AUD
Each
View the product page first if you are unsure.
25.400
mm
- 0.010 / - 0.030 		152.4
mm 		440C Case Hardened Stainless
152.4
0.30 um
Microns 		1136573 | 0R-0254-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$3,003.68 AUD
$3,003.68 AUD
Each
25.400
mm
- 0.010 / - 0.030 		152.4
mm 		440C Case Hardened Stainless
1136573 | 0R-0254-1829-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$3,003.68 AUD
$3,003.68 AUD
Each
View the product page first if you are unsure.
25.400
mm
- 0.010 / - 0.030 		610
mm 		440C Case Hardened Stainless
152.4
0.30 um
Microns 		1136678 | 0R-0254-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$1,035.14 AUD
$1,035.14 AUD
Each
25.400
mm
- 0.010 / - 0.030 		610
mm 		440C Case Hardened Stainless
1136678 | 0R-0254-0610-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$1,035.14 AUD
$1,035.14 AUD
Each
View the product page first if you are unsure.
25.400
mm
- 0.010 / - 0.030 		1219.2
mm 		440C Case Hardened Stainless
152.4
0.30 um
Microns 		1136712 | 0R-0254-1219-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$2,038.14 AUD
$2,038.14 AUD
Each
25.400
mm
- 0.010 / - 0.030 		1219.2
mm 		440C Case Hardened Stainless
1136712 | 0R-0254-1219-DT-S440-T30 --- Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30 Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Out of Stock | Backorder Now | Orders can be expected around Sun, May 04, 2025
$2,038.14 AUD
$2,038.14 AUD
Each
View the product page first if you are unsure.