Screws - Thumb - Wing

13 Products in this selection
This is a combined category of Wing Thumb Screws.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Thumb Screws and Nuts PDF Quick Guide
PDF Screws Catalogue
Nuts
A more concise listing may be found on the Smallparts store at Screws - Thumb - Wing. Smallparts promote the most popular MBA products.
Thread Size (C) Thread Length (Tl) Overall Length (L) Head Diameter (A) Head Height (H) Indicative
Image
1/4-20 UNC (6.35mm)
12.70
mm 		33.34
mm 		31.75
mm 		20.64
mm 		1073429 | THS064C-013-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 12.7x33.34 mm - Malleable Iron
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-013-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 12.7x33.34 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$8.86 AUD
$8.86 AUD
Each
Thread Size (C) Thread Length (Tl) Overall Length (L) Indicative
Image
1/4-20 UNC (6.35mm)
12.70
mm 		33.34
mm 		1073429 | THS064C-013-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 12.7x33.34 mm - Malleable Iron
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-013-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 12.7x33.34 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$8.86 AUD
$8.86 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
19.05
mm 		39.69
mm 		31.75
mm 		20.64
mm 		1074016 | THS064C-019-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 19.05x39.69 mm - Malleable Iron
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-019-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 19.05x39.69 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$13.14 AUD
$13.14 AUD
Each
1/4-20 UNC (6.35mm)
19.05
mm 		39.69
mm 		1074016 | THS064C-019-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 19.05x39.69 mm - Malleable Iron
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-019-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 19.05x39.69 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$13.14 AUD
$13.14 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
25.40
mm 		46.04
mm 		31.75
mm 		20.64
mm 		1074334 | THS064C-025-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 25.4x46.04 mm - Malleable Iron
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-025-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 25.4x46.04 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$9.23 AUD
$9.23 AUD
Each
1/4-20 UNC (6.35mm)
25.40
mm 		46.04
mm 		1074334 | THS064C-025-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 25.4x46.04 mm - Malleable Iron
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-025-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 25.4x46.04 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$9.23 AUD
$9.23 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
38.10
mm 		58.74
mm 		31.75
mm 		20.64
mm 		1074759 | THS064C-038-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 38.1x58.74 mm - Malleable Iron
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-038-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 38.1x58.74 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$13.41 AUD
$13.41 AUD
Each
1/4-20 UNC (6.35mm)
38.10
mm 		58.74
mm 		1074759 | THS064C-038-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 38.1x58.74 mm - Malleable Iron
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-038-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 38.1x58.74 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$13.41 AUD
$13.41 AUD
Each
View the product page first if you are unsure.
1/4-20 UNC (6.35mm)
50.80
mm 		71.44
mm 		31.75
mm 		20.64
mm 		1075022 | THS064C-051-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 50.8x71.44 mm - Malleable Iron
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-051-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 50.8x71.44 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$14.41 AUD
$14.41 AUD
Each
1/4-20 UNC (6.35mm)
50.80
mm 		71.44
mm 		1075022 | THS064C-051-W-CS-WF --- Thumb Screws - 1/4-20 UNC -6.35mm- 50.8x71.44 mm - Malleable Iron
Material: Malleable Iron    Head Diameter (A): 31.75 mm    Head Height (H): 20.64 mm    Finish: Tumbled    Shoulder Diameter (B): 14.29 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS064C-051-W-CS-WF Thumb Screws - 1/4-20 UNC -6.35mm- 50.8x71.44 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$14.41 AUD
$14.41 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
19.05
mm 		38.10
mm 		44.45
mm 		19.05
mm 		1078782 | THS079C-019-W-CS --- Thumb Screws - 5/16-18 UNC -7.94mm- 19.05x38.1 mm - Steel
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-019-W-CS Thumb Screws - 5/16-18 UNC -7.94mm- 19.05x38.1 mm - Steel
2 Available Immediately | Further orders can be expected around Tue, May 06, 2025
$14.23 AUD
$14.23 AUD
Each
5/16-18 UNC (7.94mm)
19.05
mm 		38.10
mm 		1078782 | THS079C-019-W-CS --- Thumb Screws - 5/16-18 UNC -7.94mm- 19.05x38.1 mm - Steel
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-019-W-CS Thumb Screws - 5/16-18 UNC -7.94mm- 19.05x38.1 mm - Steel
2 Available Immediately | Further orders can be expected around Tue, May 06, 2025
$14.23 AUD
$14.23 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
25.40
mm 		44.45
mm 		44.45
mm 		19.05
mm 		1078942 | THS079C-025-W-CS --- Thumb Screws - 5/16-18 UNC -7.94mm- 25.4x44.45 mm - Steel
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-025-W-CS Thumb Screws - 5/16-18 UNC -7.94mm- 25.4x44.45 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$15.05 AUD
$15.05 AUD
Each
5/16-18 UNC (7.94mm)
25.40
mm 		44.45
mm 		1078942 | THS079C-025-W-CS --- Thumb Screws - 5/16-18 UNC -7.94mm- 25.4x44.45 mm - Steel
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-025-W-CS Thumb Screws - 5/16-18 UNC -7.94mm- 25.4x44.45 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$15.05 AUD
$15.05 AUD
Each
View the product page first if you are unsure.
5/16-18 UNC (7.94mm)
38.10
mm 		57.15
mm 		44.45
mm 		19.05
mm 		1079127 | THS079C-038-W-CS --- Thumb Screws - 5/16-18 UNC -7.94mm- 38.1x57.15 mm - Steel
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-038-W-CS Thumb Screws - 5/16-18 UNC -7.94mm- 38.1x57.15 mm - Steel
2 Available Immediately | Further orders can be expected around Tue, May 06, 2025
$15.32 AUD
$15.32 AUD
Each
5/16-18 UNC (7.94mm)
38.10
mm 		57.15
mm 		1079127 | THS079C-038-W-CS --- Thumb Screws - 5/16-18 UNC -7.94mm- 38.1x57.15 mm - Steel
Material: Steel    Head Diameter (A): 44.45 mm    Head Height (H): 19.05 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS079C-038-W-CS Thumb Screws - 5/16-18 UNC -7.94mm- 38.1x57.15 mm - Steel
2 Available Immediately | Further orders can be expected around Tue, May 06, 2025
$15.32 AUD
$15.32 AUD
Each
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
19.05
mm 		41.28
mm 		46.04
mm 		22.23
mm 		1087893 | THS095C-019-W-CS --- Thumb Screws - 3/8-16 UNC -9.53mm- 19.05x41.28 mm - Steel
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-019-W-CS Thumb Screws - 3/8-16 UNC -9.53mm- 19.05x41.28 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$17.41 AUD
$17.41 AUD
Each
3/8-16 UNC (9.53mm)
19.05
mm 		41.28
mm 		1087893 | THS095C-019-W-CS --- Thumb Screws - 3/8-16 UNC -9.53mm- 19.05x41.28 mm - Steel
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-019-W-CS Thumb Screws - 3/8-16 UNC -9.53mm- 19.05x41.28 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$17.41 AUD
$17.41 AUD
Each
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
25.40
mm 		47.63
mm 		46.04
mm 		22.23
mm 		1088246 | THS095C-025-W-CS (50 Pcs) --- Thumb Screws - 3/8-16 UNC -9.53mm- 25.4x47.63 mm - Steel
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-025-W-CS (50 Pcs) Thumb Screws - 3/8-16 UNC -9.53mm- 25.4x47.63 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$1,155.68 AUD
$1,155.68 AUD
Per 50
3/8-16 UNC (9.53mm)
25.40
mm 		47.63
mm 		1088246 | THS095C-025-W-CS (50 Pcs) --- Thumb Screws - 3/8-16 UNC -9.53mm- 25.4x47.63 mm - Steel
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-025-W-CS (50 Pcs) Thumb Screws - 3/8-16 UNC -9.53mm- 25.4x47.63 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$1,155.68 AUD
$1,155.68 AUD
Per 50
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
25.40
mm 		50.80
mm 		36.51
mm 		25.40
mm 		1088247 | THS095C-025-W-CS-WF (50 Pcs) --- Thumb Screws - 3/8-16 UNC -9.53mm- 25.4x50.8 mm - Malleable Iron
Material: Malleable Iron    Finish: Tumbled    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS095C-025-W-CS-WF (50 Pcs) Thumb Screws - 3/8-16 UNC -9.53mm- 25.4x50.8 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$1,032.41 AUD
$1,032.41 AUD
Per 50
3/8-16 UNC (9.53mm)
25.40
mm 		50.80
mm 		1088247 | THS095C-025-W-CS-WF (50 Pcs) --- Thumb Screws - 3/8-16 UNC -9.53mm- 25.4x50.8 mm - Malleable Iron
Material: Malleable Iron    Head Diameter (A): 36.51 mm    Head Height (H): 25.40 mm    Finish: Tumbled    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Washer Face
Part Number: THS095C-025-W-CS-WF (50 Pcs) Thumb Screws - 3/8-16 UNC -9.53mm- 25.4x50.8 mm - Malleable Iron
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$1,032.41 AUD
$1,032.41 AUD
Per 50
View the product page first if you are unsure.
3/8-16 UNC (9.53mm)
38.10
mm 		60.33
mm 		46.04
mm 		22.23
mm 		1088479 | THS095C-038-W-CS --- Thumb Screws - 3/8-16 UNC -9.53mm- 38.1x60.33 mm - Steel
Material: Steel    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-038-W-CS Thumb Screws - 3/8-16 UNC -9.53mm- 38.1x60.33 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$17.41 AUD
$17.41 AUD
Each
3/8-16 UNC (9.53mm)
38.10
mm 		60.33
mm 		1088479 | THS095C-038-W-CS --- Thumb Screws - 3/8-16 UNC -9.53mm- 38.1x60.33 mm - Steel
Material: Steel    Head Diameter (A): 46.04 mm    Head Height (H): 22.23 mm    Shoulder Diameter (B): 15.88 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS095C-038-W-CS Thumb Screws - 3/8-16 UNC -9.53mm- 38.1x60.33 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$17.41 AUD
$17.41 AUD
Each
View the product page first if you are unsure.
1/2-13 UNC (12.7mm)
76.20
mm 		101.60
mm 		57.15
mm 		25.40
mm 		1104682 | THS127C-076-W-CS --- Thumb Screws - 1/2-13 UNC -12.7mm- 76.2x101.6 mm - Steel
Material: Steel    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS127C-076-W-CS Thumb Screws - 1/2-13 UNC -12.7mm- 76.2x101.6 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$28.95 AUD
$28.95 AUD
Each
1/2-13 UNC (12.7mm)
76.20
mm 		101.60
mm 		1104682 | THS127C-076-W-CS --- Thumb Screws - 1/2-13 UNC -12.7mm- 76.2x101.6 mm - Steel
Material: Steel    Head Diameter (A): 57.15 mm    Head Height (H): 25.40 mm    Shoulder Diameter (B): 19.05 mm   
Category: Screws - Thumb - Wing - Standard
Part Number: THS127C-076-W-CS Thumb Screws - 1/2-13 UNC -12.7mm- 76.2x101.6 mm - Steel
Out of Stock | Backorder Now | Orders can be expected around Tue, May 06, 2025
$28.95 AUD
$28.95 AUD
Each
View the product page first if you are unsure.