Screws - Pan Head - Phillips - PEEK

Screws -> Pan Head -> Phillips -> PEEK

There is only 1 product in the sub-categories of Screws - Pan Head - Phillips - PEEK. Browse the Screws - Pan Head - Phillips - PEEK products table.

Category Details

A selection of PEEK Phillips Pan Head Screws. Machine screws. PEEK is a super-engineering thermoplastic with special physical and chemical characteristics. Excellent resistance to chemicals, water, abrasion, shock, fatigue, radiation, heat, etc. PEEK is registered trademark of VitreTM.

  • An expanded range may be available on special order. Please enquire.
  • Excellent chemical resistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent thermal and water resistance; maintains high heat-resistance strength. Excellent abrasion, shock and fatigue resistance.
  • Excellent radiation resistance and electrical properties. Heat-resistant temperature: 180o Celcius (UL approved temperature). Excellent flame-resistance cleared by UL standard 94V-0.
  • Useful for hot-water pumps, chemical pumps, chemical-resistant applications such as FPD (Flat Panel Display) and semiconductor production equipment/devices, printed circuit board etching devices, metal plating equipment and chemical plants.
  • Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20mm.
  • For further information on the special properties of plastic screws and cautions concerning their use, please contact sales.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Screws - Pan Head - Phillips - PEEK category on the Small Parts & Bearings online store.
Thread Size (C) Thread Length (L) Material Head Diameter (D1) Head Height (L1) Indicative
Image
Pan Head Screws - M2 - 2x0.4mm - 4 mm - PEEK Phillips Screw
Thread Size (C)
M2 (2x0.4mm)
Thread Length (L)
4
mm
Material
PEEK
Head Diameter (D1)
3.5
mm
Head Height (L1)
1.3
mm
Pan Head Screws - M2 - 2x0.4mm - 4 mm - PEEK Phillips
Material: PEEK Polyetheretherketone Light Brown    Tensile Breaking Force: 160 N    Torsional Breaking Torque: 0.06 Nm    Mass: 0.02 g   
Deleted Item. Available while stocks last.
Part Number: SC020M-004-P-PH-PK (PK-8)
1 pack (8 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$4.00 AUD
$7.60 AUD $4.00 AUD
Priced, Stocked and Sold Per 8 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

1 pack (8 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Thread Size (C) Thread Length (L) Material Head Diameter (D1) Indicative
Image
Pan Head Screws - M2 - 2x0.4mm - 4 mm - PEEK Phillips Screw
Thread Size (C)
M2 (2x0.4mm)
Thread Length (L)
4
mm
Material
PEEK
Head Diameter (D1)
3.5
mm
Pan Head Screws - M2 - 2x0.4mm - 4 mm - PEEK Phillips
Material: PEEK Polyetheretherketone Light Brown    Head Height (L1): 1.3 mm    Tensile Breaking Force: 160 N    Torsional Breaking Torque: 0.06 Nm    Mass: 0.02 g   
Deleted Item. Available while stocks last.
Part Number: SC020M-004-P-PH-PK (PK-8)
1 pack (8 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$4.00 AUD
$7.60 AUD $4.00 AUD
Priced, Stocked and Sold Per 8 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

1 pack (8 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.