Pins - Hammer Drive - Flat Head

23 Products in this selection
  • Used to replace screws where the need to remove the pin is unlikely.
  • Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin.
  • Simple, low cost assembly for use in mild steel, aluminium, brass or plastics.
  • Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly.
  • Drive studs do not require lock washers to prevent back-out.
  • Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
Additional resources:
Master Pins Catalogue PDF
Min Hole Dia (d1) Approx. Length (L) Max Hole Dia. Approx Pin Diameter (d2) Max Head Diameter (d3) Max Head Thickness (T) Indicative
Image
1.40
mm 		5.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		1038936 | HDP014-05F (20 Pcs) --- Pins - 1.4 mm x 5 mm x 1.46 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-05F (20 Pcs) Pins - 1.4 mm x 5 mm x 1.46 mm
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
Min Hole Dia (d1) Approx. Length (L) Max Hole Dia. Approx Pin Diameter (d2) Indicative
Image
1.40
mm 		5.0
mm 		1.46
mm 		1.63
mm 		1038936 | HDP014-05F (20 Pcs) --- Pins - 1.4 mm x 5 mm x 1.46 mm
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-05F (20 Pcs) Pins - 1.4 mm x 5 mm x 1.46 mm
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		6.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		1038938 | HDP014-06F (20 Pcs) --- Pins - 1.4 mm x 6 mm x 1.46 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-06F (20 Pcs) Pins - 1.4 mm x 6 mm x 1.46 mm
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		6.0
mm 		1.46
mm 		1.63
mm 		1038938 | HDP014-06F (20 Pcs) --- Pins - 1.4 mm x 6 mm x 1.46 mm
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-06F (20 Pcs) Pins - 1.4 mm x 6 mm x 1.46 mm
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		8.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		1038943 | HDP014-08F (5 Pcs) --- Pins - 1.4 mm x 8 mm x 1.46 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-08F (5 Pcs) Pins - 1.4 mm x 8 mm x 1.46 mm
239 units (1195 pcs) Available
| Backorders for more can be expected around Wed, Feb 12, 2025
$3.41 AUD
$3.41 AUD
Per 5
1.40
mm 		8.0
mm 		1.46
mm 		1.63
mm 		1038943 | HDP014-08F (5 Pcs) --- Pins - 1.4 mm x 8 mm x 1.46 mm
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP014-08F (5 Pcs) Pins - 1.4 mm x 8 mm x 1.46 mm
239 units (1195 pcs) Available
| | Backorders for more can be expected around Wed, Feb 12, 2025
$3.41 AUD
$3.41 AUD
Per 5
1.60
mm 		5.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		1039869 | HDP016-05F (20 Pcs) --- Pins - 1.6 mm x 5 mm x 1.66 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-05F (20 Pcs) Pins - 1.6 mm x 5 mm x 1.66 mm
40 units (800 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		5.0
mm 		1.66
mm 		1.83
mm 		1039869 | HDP016-05F (20 Pcs) --- Pins - 1.6 mm x 5 mm x 1.66 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-05F (20 Pcs) Pins - 1.6 mm x 5 mm x 1.66 mm
40 units (800 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		6.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		1039880 | HDP016-06F (100 Pcs) --- Pins - 1.6 mm x 6 mm x 1.66 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-06F (100 Pcs) Pins - 1.6 mm x 6 mm x 1.66 mm
40 units (4000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.19 AUD
$9.29 AUD $6.19 AUD
Per 100
1.60
mm 		6.0
mm 		1.66
mm 		1.83
mm 		1039880 | HDP016-06F (100 Pcs) --- Pins - 1.6 mm x 6 mm x 1.66 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-06F (100 Pcs) Pins - 1.6 mm x 6 mm x 1.66 mm
40 units (4000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.19 AUD
$9.29 AUD $6.19 AUD
Per 100
1.60
mm 		8.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		1039893 | HDP016-08F (20 Pcs) --- Pins - 1.6 mm x 8 mm x 1.66 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-08F (20 Pcs) Pins - 1.6 mm x 8 mm x 1.66 mm
54 units (1080 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		8.0
mm 		1.66
mm 		1.83
mm 		1039893 | HDP016-08F (20 Pcs) --- Pins - 1.6 mm x 8 mm x 1.66 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP016-08F (20 Pcs) Pins - 1.6 mm x 8 mm x 1.66 mm
54 units (1080 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		6.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041011 | HDP020-06F (5 Pcs) --- Pins - 2 mm x 6 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-06F (5 Pcs) Pins - 2 mm x 6 mm x 2.06 mm
3160 units (15800 pcs) Available
| Backorders for more can be expected around Wed, Feb 12, 2025
$14.14 AUD
$14.14 AUD
Per 5
2.00
mm 		6.0
mm 		2.06
mm 		2.30
mm 		1041011 | HDP020-06F (5 Pcs) --- Pins - 2 mm x 6 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-06F (5 Pcs) Pins - 2 mm x 6 mm x 2.06 mm
3160 units (15800 pcs) Available
| | Backorders for more can be expected around Wed, Feb 12, 2025
$14.14 AUD
$14.14 AUD
Per 5
2.00
mm 		8.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041202 | HDP020-08F (20 Pcs) --- Pins - 2 mm x 8 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-08F (20 Pcs) Pins - 2 mm x 8 mm x 2.06 mm
38 units (760 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		8.0
mm 		2.06
mm 		2.30
mm 		1041202 | HDP020-08F (20 Pcs) --- Pins - 2 mm x 8 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-08F (20 Pcs) Pins - 2 mm x 8 mm x 2.06 mm
38 units (760 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		10.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041270 | HDP020-10F (20 Pcs) --- Pins - 2 mm x 10 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-10F (20 Pcs) Pins - 2 mm x 10 mm x 2.06 mm
49 units (980 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.41 AUD
$9.61 AUD $6.41 AUD
Per 20
2.00
mm 		10.0
mm 		2.06
mm 		2.30
mm 		1041270 | HDP020-10F (20 Pcs) --- Pins - 2 mm x 10 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP020-10F (20 Pcs) Pins - 2 mm x 10 mm x 2.06 mm
49 units (980 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.41 AUD
$9.61 AUD $6.41 AUD
Per 20
2.50
mm 		6.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043587 | HDP025-06F (20 Pcs) --- Pins - 2.5 mm x 6 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-06F (20 Pcs) Pins - 2.5 mm x 6 mm x 2.56 mm
425 units (8500 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.09 AUD
$10.64 AUD $7.09 AUD
Per 20
2.50
mm 		6.0
mm 		2.56
mm 		2.80
mm 		1043587 | HDP025-06F (20 Pcs) --- Pins - 2.5 mm x 6 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-06F (20 Pcs) Pins - 2.5 mm x 6 mm x 2.56 mm
425 units (8500 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$7.09 AUD
$10.64 AUD $7.09 AUD
Per 20
2.50
mm 		8.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043725 | HDP025-08F (5 Pcs) --- Pins - 2.5 mm x 8 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-08F (5 Pcs) Pins - 2.5 mm x 8 mm x 2.56 mm
1202 units (6010 pcs) Available
| Backorders for more can be expected around Wed, Feb 12, 2025
$3.68 AUD
$3.68 AUD
Per 5
2.50
mm 		8.0
mm 		2.56
mm 		2.80
mm 		1043725 | HDP025-08F (5 Pcs) --- Pins - 2.5 mm x 8 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-08F (5 Pcs) Pins - 2.5 mm x 8 mm x 2.56 mm
1202 units (6010 pcs) Available
| | Backorders for more can be expected around Wed, Feb 12, 2025
$3.68 AUD
$3.68 AUD
Per 5
2.50
mm 		10.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043826 | HDP025-10F (20 Pcs) --- Pins - 2.5 mm x 10 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-10F (20 Pcs) Pins - 2.5 mm x 10 mm x 2.56 mm
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.49 AUD
$9.74 AUD $6.49 AUD
Per 20
2.50
mm 		10.0
mm 		2.56
mm 		2.80
mm 		1043826 | HDP025-10F (20 Pcs) --- Pins - 2.5 mm x 10 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP025-10F (20 Pcs) Pins - 2.5 mm x 10 mm x 2.56 mm
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.49 AUD
$9.74 AUD $6.49 AUD
Per 20
3.00
mm 		8.0
mm 		3.06
mm 		3.35
mm 		5.45
mm 		1.20
mm 		1046583 | HDP030-08F (10 Pcs) --- Pins - 3 mm x 8 mm x 3.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-08F (10 Pcs) Pins - 3 mm x 8 mm x 3.06 mm
106 units (1060 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.86 AUD
$5.80 AUD $3.86 AUD
Per 10
3.00
mm 		8.0
mm 		3.06
mm 		3.35
mm 		1046583 | HDP030-08F (10 Pcs) --- Pins - 3 mm x 8 mm x 3.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-08F (10 Pcs) Pins - 3 mm x 8 mm x 3.06 mm
106 units (1060 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$3.86 AUD
$5.80 AUD $3.86 AUD
Per 10
3.00
mm 		10.0
mm 		3.06
mm 		3.35
mm 		5.45
mm 		1.20
mm 		1046867 | HDP030-10F (10 Pcs) --- Pins - 3 mm x 10 mm x 3.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-10F (10 Pcs) Pins - 3 mm x 10 mm x 3.06 mm
252 units (2520 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.79 AUD
$5.69 AUD $3.79 AUD
Per 10
3.00
mm 		10.0
mm 		3.06
mm 		3.35
mm 		1046867 | HDP030-10F (10 Pcs) --- Pins - 3 mm x 10 mm x 3.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-10F (10 Pcs) Pins - 3 mm x 10 mm x 3.06 mm
252 units (2520 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$3.79 AUD
$5.69 AUD $3.79 AUD
Per 10
3.00
mm 		12.0
mm 		3.06
mm 		3.35
mm 		5.45
mm 		1.20
mm 		1047084 | HDP030-12F (20 Pcs) --- Pins - 3 mm x 12 mm x 3.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-12F (20 Pcs) Pins - 3 mm x 12 mm x 3.06 mm
45 units (900 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.56 AUD
$9.85 AUD $6.56 AUD
Per 20
3.00
mm 		12.0
mm 		3.06
mm 		3.35
mm 		1047084 | HDP030-12F (20 Pcs) --- Pins - 3 mm x 12 mm x 3.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 5.45 mm    Max Head Thickness (T): 1.20 mm    Nom. Pilot Length (P): 1.0 mm   
Part Number: HDP030-12F (20 Pcs) Pins - 3 mm x 12 mm x 3.06 mm
45 units (900 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.56 AUD
$9.85 AUD $6.56 AUD
Per 20
4.00
mm 		10.0
mm 		4.08
mm 		4.35
mm 		7.25
mm 		1.50
mm 		1054354 | HDP040-10F (10 Pcs) --- Pins - 4 mm x 10 mm x 4.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-10F (10 Pcs) Pins - 4 mm x 10 mm x 4.08 mm
50 units (500 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.71 AUD
$5.56 AUD $3.71 AUD
Per 10
4.00
mm 		10.0
mm 		4.08
mm 		4.35
mm 		1054354 | HDP040-10F (10 Pcs) --- Pins - 4 mm x 10 mm x 4.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-10F (10 Pcs) Pins - 4 mm x 10 mm x 4.08 mm
50 units (500 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$3.71 AUD
$5.56 AUD $3.71 AUD
Per 10
4.00
mm 		12.0
mm 		4.08
mm 		4.35
mm 		7.25
mm 		1.50
mm 		1054625 | HDP040-12F (10 Pcs) --- Pins - 4 mm x 12 mm x 4.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-12F (10 Pcs) Pins - 4 mm x 12 mm x 4.08 mm
52 units (520 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.79 AUD
$5.69 AUD $3.79 AUD
Per 10
4.00
mm 		12.0
mm 		4.08
mm 		4.35
mm 		1054625 | HDP040-12F (10 Pcs) --- Pins - 4 mm x 12 mm x 4.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-12F (10 Pcs) Pins - 4 mm x 12 mm x 4.08 mm
52 units (520 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$3.79 AUD
$5.69 AUD $3.79 AUD
Per 10
4.00
mm 		16.0
mm 		4.08
mm 		4.35
mm 		7.25
mm 		1.50
mm 		1055045 | HDP040-16F (5 Pcs) --- Pins - 4 mm x 16 mm x 4.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-16F (5 Pcs) Pins - 4 mm x 16 mm x 4.08 mm
112 units (560 pcs) Available
| Backorders for more can be expected around Wed, Feb 12, 2025
$3.86 AUD
$3.86 AUD
Per 5
4.00
mm 		16.0
mm 		4.08
mm 		4.35
mm 		1055045 | HDP040-16F (5 Pcs) --- Pins - 4 mm x 16 mm x 4.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 7.25 mm    Max Head Thickness (T): 1.50 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP040-16F (5 Pcs) Pins - 4 mm x 16 mm x 4.08 mm
112 units (560 pcs) Available
| | Backorders for more can be expected around Wed, Feb 12, 2025
$3.86 AUD
$3.86 AUD
Per 5
5.00
mm 		12.0
mm 		5.08
mm 		5.35
mm 		9.10
mm 		1.80
mm 		1063207 | HDP050-12F (5 Pcs) --- Pins - 5 mm x 12 mm x 5.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-12F (5 Pcs) Pins - 5 mm x 12 mm x 5.08 mm
200 units (1000 pcs) Available
| Backorders for more can be expected around Wed, Feb 12, 2025
$4.86 AUD
$4.86 AUD
Per 5
5.00
mm 		12.0
mm 		5.08
mm 		5.35
mm 		1063207 | HDP050-12F (5 Pcs) --- Pins - 5 mm x 12 mm x 5.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-12F (5 Pcs) Pins - 5 mm x 12 mm x 5.08 mm
200 units (1000 pcs) Available
| | Backorders for more can be expected around Wed, Feb 12, 2025
$4.86 AUD
$4.86 AUD
Per 5
5.00
mm 		16.0
mm 		5.08
mm 		5.35
mm 		9.10
mm 		1.80
mm 		1063750 | HDP050-16F (10 Pcs) --- Pins - 5 mm x 16 mm x 5.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-16F (10 Pcs) Pins - 5 mm x 16 mm x 5.08 mm
53 units (530 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.94 AUD
$5.90 AUD $3.94 AUD
Per 10
5.00
mm 		16.0
mm 		5.08
mm 		5.35
mm 		1063750 | HDP050-16F (10 Pcs) --- Pins - 5 mm x 16 mm x 5.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-16F (10 Pcs) Pins - 5 mm x 16 mm x 5.08 mm
53 units (530 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$3.94 AUD
$5.90 AUD $3.94 AUD
Per 10
5.00
mm 		20.0
mm 		5.08
mm 		5.35
mm 		9.10
mm 		1.80
mm 		1064076 | HDP050-20F (10 Pcs) --- Pins - 5 mm x 20 mm x 5.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-20F (10 Pcs) Pins - 5 mm x 20 mm x 5.08 mm
91 units (910 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.86 AUD
$5.80 AUD $3.86 AUD
Per 10
5.00
mm 		20.0
mm 		5.08
mm 		5.35
mm 		1064076 | HDP050-20F (10 Pcs) --- Pins - 5 mm x 20 mm x 5.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 9.10 mm    Max Head Thickness (T): 1.80 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP050-20F (10 Pcs) Pins - 5 mm x 20 mm x 5.08 mm
91 units (910 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$3.86 AUD
$5.80 AUD $3.86 AUD
Per 10
6.00
mm 		16.0
mm 		6.08
mm 		6.35
mm 		10.80
mm 		2.20
mm 		1068609 | HDP060-16F (5 Pcs) --- Pins - 6 mm x 16 mm x 6.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP060-16F (5 Pcs) Pins - 6 mm x 16 mm x 6.08 mm
495 units (2475 pcs) Available
| Backorders for more can be expected around Wed, Feb 12, 2025
$4.68 AUD
$4.68 AUD
Per 5
6.00
mm 		16.0
mm 		6.08
mm 		6.35
mm 		1068609 | HDP060-16F (5 Pcs) --- Pins - 6 mm x 16 mm x 6.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 10.80 mm    Max Head Thickness (T): 2.20 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP060-16F (5 Pcs) Pins - 6 mm x 16 mm x 6.08 mm
495 units (2475 pcs) Available
| | Backorders for more can be expected around Wed, Feb 12, 2025
$4.68 AUD
$4.68 AUD
Per 5
6.00
mm 		20.0
mm 		6.08
mm 		6.35
mm 		10.80
mm 		2.20
mm 		1069010 | HDP060-20F (10 Pcs) --- Pins - 6 mm x 20 mm x 6.08 mm
Material: Carbon Steel    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP060-20F (10 Pcs) Pins - 6 mm x 20 mm x 6.08 mm
50 units (500 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.39 AUD
$6.59 AUD $4.39 AUD
Per 10
6.00
mm 		20.0
mm 		6.08
mm 		6.35
mm 		1069010 | HDP060-20F (10 Pcs) --- Pins - 6 mm x 20 mm x 6.08 mm
Material: Carbon Steel    Max Head Diameter (d3): 10.80 mm    Max Head Thickness (T): 2.20 mm    Nom. Pilot Length (P): 2.0 mm   
Part Number: HDP060-20F (10 Pcs) Pins - 6 mm x 20 mm x 6.08 mm
50 units (500 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$4.39 AUD
$6.59 AUD $4.39 AUD
Per 10