Pins - Dowel - Standard - Rounded Ends - Unhardened Steel

Pins -> Dowel -> Standard -> Rounded Ends -> Unhardened Steel

There are 14 products in the sub-categories of Pins - Dowel - Standard - Rounded Ends - Unhardened Steel. Browse the Pins - Dowel - Standard - Rounded Ends - Unhardened Steel products table.

Category Details

A selection of Unhardened Steel Rounded Ends Standard Dowel Pins. Precision Dowel Pins - Based on DIN7

  • Also known as parallel pins.
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances
  • An expanded range may be available on special order. Please enquire.
  • Rounded end dowel pins are measured from the start of the edge rounding. This allows the pin to completely fill the hole after you grind off the rounded end.
  • Diameter tolerances are m6 unless otherwise listed

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Pins - Dowel - Standard - Rounded Ends - Unhardened Steel category on the Small Parts & Bearings online store.
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
Dowel Pins - 2x8x8.6 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
(Equiv. 0.079 in.)
Length (L)
8.00
mm
+/- 0.254
(Equiv. 0.315 in.)
Approx. Overall Length
8.60
mm
+/- 0.254
(Equiv. 0.339 in.)
Type
3 (Rounded Ends)
Dowel Pins - 2x8x8.6 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 3936
Part Number: DP020-008-C-3 (Pack of 5)
92 units (460 pcs) Available Now | Further orders can be expected around Tue, Aug 18, 2026
$4.14 AUD
$4.14 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 92 available can be backordered.
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
Dowel Pins - 2x8x8.6 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
(Equiv. 0.079 in.)
Length (L)
8.00
mm
+/- 0.254
(Equiv. 0.315 in.)
Approx. Overall Length
8.60
mm
+/- 0.254
(Equiv. 0.339 in.)
Dowel Pins - 2x8x8.6 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 3936
Part Number: DP020-008-C-3 (Pack of 5)
92 units (460 pcs) Available Now | Further orders can be expected around Tue, Aug 18, 2026
$4.14 AUD
$4.14 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

92 units (460 pcs) Available Now. Backorder if more than 92.
Dowel Pins - 2.5x6x6.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
(Equiv. 0.098 in.)
Length (L)
6.00
mm
+/- 0.254
(Equiv. 0.236 in.)
Approx. Overall Length
6.80
mm
+/- 0.254
(Equiv. 0.268 in.)
Type
3 (Rounded Ends)
Dowel Pins - 2.5x6x6.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 55
Part Number: DP025-006-C-3 (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$27.41 AUD
$31.89 AUD $27.41 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 2.5x6x6.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
(Equiv. 0.098 in.)
Length (L)
6.00
mm
+/- 0.254
(Equiv. 0.236 in.)
Approx. Overall Length
6.80
mm
+/- 0.254
(Equiv. 0.268 in.)
Dowel Pins - 2.5x6x6.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 55
Part Number: DP025-006-C-3 (Pack of 100)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$27.41 AUD
$31.89 AUD $27.41 AUD
Priced, Stocked and Sold Per 100 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 3x14x14.9 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
(Equiv. 0.118 in.)
Length (L)
14.00
mm
+/- 0.350
(Equiv. 0.551 in.)
Approx. Overall Length
14.90
mm
+/- 0.350
(Equiv. 0.587 in.)
Type
3 (Rounded Ends)
Dowel Pins - 3x14x14.9 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 1712
Part Number: DP030-014-C-3 (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$33.14 AUD
$38.76 AUD $33.14 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 3x14x14.9 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
(Equiv. 0.118 in.)
Length (L)
14.00
mm
+/- 0.350
(Equiv. 0.551 in.)
Approx. Overall Length
14.90
mm
+/- 0.350
(Equiv. 0.587 in.)
Dowel Pins - 3x14x14.9 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 1712
Part Number: DP030-014-C-3 (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$33.14 AUD
$38.76 AUD $33.14 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 3x18x18.9 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
(Equiv. 0.118 in.)
Length (L)
18.00
mm
+/- 0.420
(Equiv. 0.709 in.)
Approx. Overall Length
18.90
mm
+/- 0.420
(Equiv. 0.744 in.)
Type
3 (Rounded Ends)
Dowel Pins - 3x18x18.9 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Part Number: DP030-018-C-3 (Pack of 1250)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$543.59 AUD
$543.59 AUD
Priced, Stocked and Sold Per 1250 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 3x18x18.9 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
(Equiv. 0.118 in.)
Length (L)
18.00
mm
+/- 0.420
(Equiv. 0.709 in.)
Approx. Overall Length
18.90
mm
+/- 0.420
(Equiv. 0.744 in.)
Dowel Pins - 3x18x18.9 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Part Number: DP030-018-C-3 (Pack of 1250)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$543.59 AUD
$543.59 AUD
Priced, Stocked and Sold Per 1250 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 3x20x20.9 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
(Equiv. 0.118 in.)
Length (L)
20.00
mm
+/- 0.420
(Equiv. 0.787 in.)
Approx. Overall Length
20.90
mm
+/- 0.420
(Equiv. 0.823 in.)
Type
3 (Rounded Ends)
Dowel Pins - 3x20x20.9 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Part Number: DP030-020-C-3 (Pack of 1250)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$543.59 AUD
$543.59 AUD
Priced, Stocked and Sold Per 1250 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 3x20x20.9 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
(Equiv. 0.118 in.)
Length (L)
20.00
mm
+/- 0.420
(Equiv. 0.787 in.)
Approx. Overall Length
20.90
mm
+/- 0.420
(Equiv. 0.823 in.)
Dowel Pins - 3x20x20.9 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Part Number: DP030-020-C-3 (Pack of 1250)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$543.59 AUD
$543.59 AUD
Priced, Stocked and Sold Per 1250 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 4x20x21.2 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
4.000
mm
+ 0.004 / + 0.012
(Equiv. 0.157 in.)
Length (L)
20.00
mm
+/- 0.420
(Equiv. 0.787 in.)
Approx. Overall Length
21.20
mm
+/- 0.420
(Equiv. 0.835 in.)
Type
3 (Rounded Ends)
Dowel Pins - 4x20x21.2 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Part Number: DP040-020-C-3 (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$16.86 AUD
$19.64 AUD $16.86 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 4x20x21.2 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
4.000
mm
+ 0.004 / + 0.012
(Equiv. 0.157 in.)
Length (L)
20.00
mm
+/- 0.420
(Equiv. 0.787 in.)
Approx. Overall Length
21.20
mm
+/- 0.420
(Equiv. 0.835 in.)
Dowel Pins - 4x20x21.2 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Part Number: DP040-020-C-3 (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$16.86 AUD
$19.64 AUD $16.86 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 5x20x21.5 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
5.000
mm
+ 0.004 / + 0.012
(Equiv. 0.197 in.)
Length (L)
20.00
mm
+/- 0.420
(Equiv. 0.787 in.)
Approx. Overall Length
21.50
mm
+/- 0.420
(Equiv. 0.846 in.)
Type
3 (Rounded Ends)
Dowel Pins - 5x20x21.5 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 347
Part Number: DP050-020-C-3 (Pack of 5)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$9.59 AUD
$9.59 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 5x20x21.5 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
5.000
mm
+ 0.004 / + 0.012
(Equiv. 0.197 in.)
Length (L)
20.00
mm
+/- 0.420
(Equiv. 0.787 in.)
Approx. Overall Length
21.50
mm
+/- 0.420
(Equiv. 0.846 in.)
Dowel Pins - 5x20x21.5 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 347
Part Number: DP050-020-C-3 (Pack of 5)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$9.59 AUD
$9.59 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 6x10x11.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(Equiv. 0.236 in.)
Length (L)
10.00
mm
+/- 0.350
(Equiv. 0.394 in.)
Approx. Overall Length
11.80
mm
+/- 0.350
(Equiv. 0.465 in.)
Type
3 (Rounded Ends)
Dowel Pins - 6x10x11.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 1066
Part Number: DP060-010-C-3 (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$100.86 AUD
$119.44 AUD $100.86 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 6x10x11.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(Equiv. 0.236 in.)
Length (L)
10.00
mm
+/- 0.350
(Equiv. 0.394 in.)
Approx. Overall Length
11.80
mm
+/- 0.350
(Equiv. 0.465 in.)
Dowel Pins - 6x10x11.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 1066
Part Number: DP060-010-C-3 (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$100.86 AUD
$119.44 AUD $100.86 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 6x12x13.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(Equiv. 0.236 in.)
Length (L)
12.00
mm
+/- 0.350
(Equiv. 0.472 in.)
Approx. Overall Length
13.80
mm
+/- 0.350
(Equiv. 0.543 in.)
Type
3 (Rounded Ends)
Dowel Pins - 6x12x13.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 933
Part Number: DP060-012-C-3 (Pack of 5)
140 units (700 pcs) Available Now | Further orders can be expected around Tue, Aug 18, 2026
$8.50 AUD
$9.80 AUD $8.50 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 140 available can be backordered.
Dowel Pins - 6x12x13.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(Equiv. 0.236 in.)
Length (L)
12.00
mm
+/- 0.350
(Equiv. 0.472 in.)
Approx. Overall Length
13.80
mm
+/- 0.350
(Equiv. 0.543 in.)
Dowel Pins - 6x12x13.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 933
Part Number: DP060-012-C-3 (Pack of 5)
140 units (700 pcs) Available Now | Further orders can be expected around Tue, Aug 18, 2026
$8.50 AUD
$9.80 AUD $8.50 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

140 units (700 pcs) Available Now. Backorder if more than 140.
Dowel Pins - 6x16x17.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(Equiv. 0.236 in.)
Length (L)
16.00
mm
+/- 0.350
(Equiv. 0.63 in.)
Approx. Overall Length
17.80
mm
+/- 0.350
(Equiv. 0.701 in.)
Type
3 (Rounded Ends)
Dowel Pins - 6x16x17.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 2015
Part Number: DP060-016-C-3 (Pack of 4)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$4.86 AUD
$5.64 AUD $4.86 AUD
Priced, Stocked and Sold Per 4 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 6x16x17.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(Equiv. 0.236 in.)
Length (L)
16.00
mm
+/- 0.350
(Equiv. 0.63 in.)
Approx. Overall Length
17.80
mm
+/- 0.350
(Equiv. 0.701 in.)
Dowel Pins - 6x16x17.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 2015
Part Number: DP060-016-C-3 (Pack of 4)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$4.86 AUD
$5.64 AUD $4.86 AUD
Priced, Stocked and Sold Per 4 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 6x20x21.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(Equiv. 0.236 in.)
Length (L)
20.00
mm
+/- 0.420
(Equiv. 0.787 in.)
Approx. Overall Length
21.80
mm
+/- 0.420
(Equiv. 0.858 in.)
Type
3 (Rounded Ends)
Dowel Pins - 6x20x21.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Part Number: DP060-020-C-3 (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$21.41 AUD
$25.09 AUD $21.41 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 6x20x21.8 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(Equiv. 0.236 in.)
Length (L)
20.00
mm
+/- 0.420
(Equiv. 0.787 in.)
Approx. Overall Length
21.80
mm
+/- 0.420
(Equiv. 0.858 in.)
Dowel Pins - 6x20x21.8 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Part Number: DP060-020-C-3 (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$21.41 AUD
$25.09 AUD $21.41 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 8x24x26.4 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
8.000
mm
+ 0.006 / + 0.015
(Equiv. 0.315 in.)
Length (L)
24.00
mm
+/- 0.420
(Equiv. 0.945 in.)
Approx. Overall Length
26.40
mm
+/- 0.420
(Equiv. 1.039 in.)
Type
3 (Rounded Ends)
Dowel Pins - 8x24x26.4 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 69
Part Number: DP080-024-C-3 (Pack of 5)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$9.95 AUD
$9.95 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 8x24x26.4 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
8.000
mm
+ 0.006 / + 0.015
(Equiv. 0.315 in.)
Length (L)
24.00
mm
+/- 0.420
(Equiv. 0.945 in.)
Approx. Overall Length
26.40
mm
+/- 0.420
(Equiv. 1.039 in.)
Dowel Pins - 8x24x26.4 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Additional stock available from USA subject to Prior Sale = 69
Part Number: DP080-024-C-3 (Pack of 5)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Aug 18, 2026
$9.95 AUD
$9.95 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 10x24x27 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
(Equiv. 0.394 in.)
Length (L)
24.00
mm
+/- 0.420
(Equiv. 0.945 in.)
Approx. Overall Length
27.00
mm
+/- 0.420
(Equiv. 1.063 in.)
Type
3 (Rounded Ends)
Dowel Pins - 10x24x27 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Part Number: DP100-024-C-3 (Pack of 7)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$11.23 AUD
$13.07 AUD $11.23 AUD
Priced, Stocked and Sold Per 7 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 10x24x27 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
(Equiv. 0.394 in.)
Length (L)
24.00
mm
+/- 0.420
(Equiv. 0.945 in.)
Approx. Overall Length
27.00
mm
+/- 0.420
(Equiv. 1.063 in.)
Dowel Pins - 10x24x27 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Part Number: DP100-024-C-3 (Pack of 7)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$11.23 AUD
$13.07 AUD $11.23 AUD
Priced, Stocked and Sold Per 7 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 16x50x55 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
16.000
mm
+ 0.007 / + 0.018
(Equiv. 0.63 in.)
Length (L)
50.00
mm
+/- 0.600
(Equiv. 1.969 in.)
Approx. Overall Length
55.00
mm
+/- 0.600
(Equiv. 2.165 in.)
Type
3 (Rounded Ends)
Dowel Pins - 16x50x55 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Standard: Based on DIN 7   
Part Number: DP160-050-C-3 (Pack of 500)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$1,270.77 AUD
$1,270.77 AUD
Priced, Stocked and Sold Per 500 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Dowel Pins - 16x50x55 mm Standard - Carbon Steel Unhardened Pin
Diameter (D)
16.000
mm
+ 0.007 / + 0.018
(Equiv. 0.63 in.)
Length (L)
50.00
mm
+/- 0.600
(Equiv. 1.969 in.)
Approx. Overall Length
55.00
mm
+/- 0.600
(Equiv. 2.165 in.)
Dowel Pins - 16x50x55 mm Standard - Carbon Steel Unhardened Pin
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)    Standard: Based on DIN 7   
Part Number: DP160-050-C-3 (Pack of 500)
Out of Stock | Backorder Now | Backorder now for delivery around Mon, May 31, 2027
$1,270.77 AUD
$1,270.77 AUD
Priced, Stocked and Sold Per 500 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.