Inserts - Self Tapping - For Wood - Slotted Drive - Standard

Inserts -> Self Tapping -> For Wood -> Slotted Drive -> Standard

There are 5 products in the sub-categories of Inserts - Self Tapping - For Wood - Slotted Drive - Standard. Browse the Inserts - Self Tapping - For Wood - Slotted Drive - Standard products table.

Category Details

A selection of Standard Slotted Drive For Wood Self Tapping Inserts. Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

  • Threaded bushing with external threads that cuts its own internal threads into a pre-drilled hole.
  • Creates a permanent, wear-resistant, and strong machine thread in materials such as aluminum, brass, cast iron, and plastics, without the need for a pre-tapped hole.
  • Used for strengthening materials, providing durable fastening points for machine screws, and repairing damaged threads.
  • Provides a strong wear and vibration resistant thread.
  • Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately)
  • Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation.
  • A 60o countersink is required for flush mounting.
  • Use with soft plastics, hard and soft wood, particle board

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Inserts - Self Tapping - For Wood - Slotted Drive - Standard category on the Small Parts & Bearings online store.
Internal Thread Rec. Hole Diameter Length (L) Outside Diameter (B) Indicative
Image
Self Tapping Inserts - 6-32 UNC - 3.5mm - 4.6x8 mm For Wood - Brass Insert
Internal Thread
6-32 UNC (3.5mm)

Rec. Hole Diameter
4.60
mm

(Equiv. 0.181 in.)
Length (L)
8.0
mm

(Equiv. 0.315 in.)
Outside Diameter (B)
6.502
mm
Self Tapping Inserts - 6-32 UNC - 3.5mm - 4.6x8 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 10.008 mm    Hardwood and Plastic Hole Size: 4.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-035C-08-WSL (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Wed, Sep 06, 2028
$11.14 AUD
$11.14 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Internal Thread Rec. Hole Diameter Length (L) Outside Diameter (B) Indicative
Image
Self Tapping Inserts - 6-32 UNC - 3.5mm - 4.6x8 mm For Wood - Brass Insert
Internal Thread
6-32 UNC (3.5mm)

Rec. Hole Diameter
4.60
mm

(Equiv. 0.181 in.)
Length (L)
8.0
mm

(Equiv. 0.315 in.)
Outside Diameter (B)
6.502
mm
Self Tapping Inserts - 6-32 UNC - 3.5mm - 4.6x8 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 10.008 mm    Hardwood and Plastic Hole Size: 4.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-035C-08-WSL (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Wed, Sep 06, 2028
$11.14 AUD
$11.14 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Tapping Inserts - 8-32 UNC - 4.17mm - 5.11x10 mm For Wood - Brass Insert
Internal Thread
8-32 UNC (4.17mm)

Rec. Hole Diameter
5.11
mm

(Equiv. 0.201 in.)
Length (L)
10.0
mm

(Equiv. 0.394 in.)
Outside Diameter (B)
7.010
mm
Self Tapping Inserts - 8-32 UNC - 4.17mm - 5.11x10 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 13.005 mm    Hardwood and Plastic Hole Size: 5.21 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-042C-10-WSL (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Wed, Sep 06, 2028
$12.95 AUD
$12.95 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Tapping Inserts - 8-32 UNC - 4.17mm - 5.11x10 mm For Wood - Brass Insert
Internal Thread
8-32 UNC (4.17mm)

Rec. Hole Diameter
5.11
mm

(Equiv. 0.201 in.)
Length (L)
10.0
mm

(Equiv. 0.394 in.)
Outside Diameter (B)
7.010
mm
Self Tapping Inserts - 8-32 UNC - 4.17mm - 5.11x10 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 13.005 mm    Hardwood and Plastic Hole Size: 5.21 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-042C-10-WSL (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Wed, Sep 06, 2028
$12.95 AUD
$12.95 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Tapping Inserts - 1/4-20 UNC - 6.35mm - 7.62x14 mm For Wood - Brass Insert
Internal Thread
1/4-20 UNC (6.35mm)

Rec. Hole Diameter
7.62
mm

(Equiv. 0.3 in.)
Length (L)
14.0
mm

(Equiv. 0.551 in.)
Outside Diameter (B)
10.008
mm
Self Tapping Inserts - 1/4-20 UNC - 6.35mm - 7.62x14 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 16.993 mm    Hardwood and Plastic Hole Size: 7.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-064C-14-WSL (PK-2)
4 units (8 pcs) Available Now | Further orders can be expected around Wed, Sep 06, 2028
$6.77 AUD
$8.13 AUD $6.77 AUD
Priced, Stocked and Sold Per 2 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 4 available can be backordered.
Self Tapping Inserts - 1/4-20 UNC - 6.35mm - 7.62x14 mm For Wood - Brass Insert
Internal Thread
1/4-20 UNC (6.35mm)

Rec. Hole Diameter
7.62
mm

(Equiv. 0.3 in.)
Length (L)
14.0
mm

(Equiv. 0.551 in.)
Outside Diameter (B)
10.008
mm
Self Tapping Inserts - 1/4-20 UNC - 6.35mm - 7.62x14 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 16.993 mm    Hardwood and Plastic Hole Size: 7.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-064C-14-WSL (PK-2)
4 units (8 pcs) Available Now | Further orders can be expected around Wed, Sep 06, 2028
$6.77 AUD
$8.13 AUD $6.77 AUD
Priced, Stocked and Sold Per 2 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

4 units (8 pcs) Available Now. Backorder if more than 4.
Self Tapping Inserts - 3/8-16 UNC - 9.53mm - 12.4x23 mm For Wood - Brass Insert
Internal Thread
3/8-16 UNC (9.53mm)

Rec. Hole Diameter
12.40
mm

(Equiv. 0.488 in.)
Length (L)
23.0
mm

(Equiv. 0.906 in.)
Outside Diameter (B)
16.002
mm
Self Tapping Inserts - 3/8-16 UNC - 9.53mm - 12.4x23 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 26.010 mm    Hardwood and Plastic Hole Size: 12.60 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-095C-23-WSL (Each)
5 Available Now | Further orders can be expected around Wed, Sep 06, 2028
$10.59 AUD
$12.71 AUD $10.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 5 available can be backordered.
Self Tapping Inserts - 3/8-16 UNC - 9.53mm - 12.4x23 mm For Wood - Brass Insert
Internal Thread
3/8-16 UNC (9.53mm)

Rec. Hole Diameter
12.40
mm

(Equiv. 0.488 in.)
Length (L)
23.0
mm

(Equiv. 0.906 in.)
Outside Diameter (B)
16.002
mm
Self Tapping Inserts - 3/8-16 UNC - 9.53mm - 12.4x23 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 26.010 mm    Hardwood and Plastic Hole Size: 12.60 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-095C-23-WSL (Each)
5 Available Now | Further orders can be expected around Wed, Sep 06, 2028
$10.59 AUD
$12.71 AUD $10.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

5 Available Now. Backorder if more than 5.
Self Tapping Inserts - M6 - 6x1mm - 8x12.7 mm For Wood - Stainless Steel Bearing
Internal Thread
M6 (6x1mm)

Rec. Hole Diameter
8.0
mm

(Equiv. 0.315 in.)
Length (L)
12.7
mm

(Equiv. 0.5 in.)
Outside Diameter (B)
11.5
mm
Self Tapping Inserts - M6 - 6x1mm - 8x12.7 mm For Wood - Stainless Steel Bearing
Material: Stainless Steel    Required Hole Depth: 14.9 mm    Hardwood and Plastic Hole Size: 9.92 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-040M-13-WSL (Each)
50 Available Now | Further orders can be expected around Wed, Sep 06, 2028
$16.50 AUD
$19.80 AUD $16.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 50 available can be backordered.
Self Tapping Inserts - M6 - 6x1mm - 8x12.7 mm For Wood - Stainless Steel Bearing
Internal Thread
M6 (6x1mm)

Rec. Hole Diameter
8.0
mm

(Equiv. 0.315 in.)
Length (L)
12.7
mm

(Equiv. 0.5 in.)
Outside Diameter (B)
11.5
mm
Self Tapping Inserts - M6 - 6x1mm - 8x12.7 mm For Wood - Stainless Steel Bearing
Material: Stainless Steel    Required Hole Depth: 14.9 mm    Hardwood and Plastic Hole Size: 9.92 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-040M-13-WSL (Each)
50 Available Now | Further orders can be expected around Wed, Sep 06, 2028
$16.50 AUD
$19.80 AUD $16.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

50 Available Now. Backorder if more than 50.