Inserts - Self Tapping - For Plastics - Stainless Steel

4 Products in this selection
  • Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
  • Provides a strong wear and vibration resistant thread. Use of installation tool recommended.
  • Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately)
  • Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation.
  • A 60o countersink is required for flush mounting.
  • Use with plastics, light metal alloys or hard wood. Standard made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless
Internal Thread Hardwood and Plastic Hole Size Length (C) Outside Diameter (B) Indicative
Image
8-32 UNC (4.166mm)
 5.79
mm 		8.0
 6.50
 1056571 | IN-TP-042C-08-P-S3 --- Inserts - 8-32 UNC (4.166mm) x 5.79 mm x 8
Material: 303 Stainless Steel    Required Hole Depth: 10.00 mm    Soft Metals Hole Size: 5.99    Material to be used in: Plastic, Light Metal Alloys and Hardwood   
Part Number: IN-TP-042C-08-P-S3 Inserts - 8-32 UNC (4.166mm) x 5.79 mm x 8
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$7.77 AUD
$7.77 AUD
Each
Internal Thread Hardwood and Plastic Hole Size Length (C) Outside Diameter (B) Indicative
Image
8-32 UNC (4.166mm)
 5.79
mm 		8.0
 6.50
 1056571 | IN-TP-042C-08-P-S3 --- Inserts - 8-32 UNC (4.166mm) x 5.79 mm x 8
Material: 303 Stainless Steel    Required Hole Depth: 10.00 mm    Soft Metals Hole Size: 5.99    Material to be used in: Plastic, Light Metal Alloys and Hardwood   
Part Number: IN-TP-042C-08-P-S3 Inserts - 8-32 UNC (4.166mm) x 5.79 mm x 8
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$7.77 AUD
$7.77 AUD
Each
10-24 UNC (4.762mm)
 7.09
mm 		10.0
 8.00
 1058936 | IN-TP-048C-10-P-S3 (50 Pcs) --- Inserts - 10-24 UNC (4.762mm) x 7.09 mm x 10
Material: 303 Stainless Steel    Required Hole Depth: 13.00 mm    Soft Metals Hole Size: 7.29    Material to be used in: Plastic, Light Metal Alloys and Hardwood   
Part Number: IN-TP-048C-10-P-S3 (50 Pcs) Inserts - 10-24 UNC (4.762mm) x 7.09 mm x 10
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$733.68 AUD
$733.68 AUD
Per 50
10-24 UNC (4.762mm)
 7.09
mm 		10.0
 8.00
 1058936 | IN-TP-048C-10-P-S3 (50 Pcs) --- Inserts - 10-24 UNC (4.762mm) x 7.09 mm x 10
Material: 303 Stainless Steel    Required Hole Depth: 13.00 mm    Soft Metals Hole Size: 7.29    Material to be used in: Plastic, Light Metal Alloys and Hardwood   
Part Number: IN-TP-048C-10-P-S3 (50 Pcs) Inserts - 10-24 UNC (4.762mm) x 7.09 mm x 10
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$733.68 AUD
$733.68 AUD
Per 50
1/4-20 UNC (6.35mm)
 8.59
mm 		14.0
 10.00
 1072472 | IN-TP-064C-14-P-S3 --- Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14
Material: 303 Stainless Steel    Required Hole Depth: 17.00 mm    Soft Metals Hole Size: 8.89    Material to be used in: Plastic, Light Metal Alloys and Hardwood   
Part Number: IN-TP-064C-14-P-S3 Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14
10 Available
| Backorders for more can be expected around Sat, Jan 18, 2025
$13.41 AUD
$13.41 AUD
Each
1/4-20 UNC (6.35mm)
 8.59
mm 		14.0
 10.00
 1072472 | IN-TP-064C-14-P-S3 --- Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14
Material: 303 Stainless Steel    Required Hole Depth: 17.00 mm    Soft Metals Hole Size: 8.89    Material to be used in: Plastic, Light Metal Alloys and Hardwood   
Part Number: IN-TP-064C-14-P-S3 Inserts - 1/4-20 UNC (6.35mm) x 8.59 mm x 14
10 Available
| | Backorders for more can be expected around Sat, Jan 18, 2025
$13.41 AUD
$13.41 AUD
Each
3/8-16 UNC (9.525mm)
 12.60
mm 		18.0
 14.00
 1087133 | IN-TP-095C-18-P-S3 (60 Pcs) --- Inserts - 3/8-16 UNC (9.525mm) x 12.6 mm x 18
Material: 303 Stainless Steel    Required Hole Depth: 22.00 mm    Soft Metals Hole Size: 12.90    Material to be used in: Plastic, Light Metal Alloys and Hardwood   
Part Number: IN-TP-095C-18-P-S3 (60 Pcs) Inserts - 3/8-16 UNC (9.525mm) x 12.6 mm x 18
Out of Stock
Backorder Now | Backorders for more can be expected around Sat, Jan 18, 2025
$1,835.77 AUD
$1,835.77 AUD
Per 60
3/8-16 UNC (9.525mm)
 12.60
mm 		18.0
 14.00
 1087133 | IN-TP-095C-18-P-S3 (60 Pcs) --- Inserts - 3/8-16 UNC (9.525mm) x 12.6 mm x 18
Material: 303 Stainless Steel    Required Hole Depth: 22.00 mm    Soft Metals Hole Size: 12.90    Material to be used in: Plastic, Light Metal Alloys and Hardwood   
Part Number: IN-TP-095C-18-P-S3 (60 Pcs) Inserts - 3/8-16 UNC (9.525mm) x 12.6 mm x 18
Out of Stock
Backorder Now | | Backorders for more can be expected around Sat, Jan 18, 2025
$1,835.77 AUD
$1,835.77 AUD
Per 60