Handles - Adjustable Tapped and Reamed

Handles -> Adjustable Tapped and Reamed

There are 21 products in the sub-categories of Handles - Adjustable Tapped and Reamed. Use the filters to narrow down the selection in the Handles - Adjustable Tapped and Reamed products table.

Category Details

A selection of Adjustable Tapped and Reamed Handles. Adjustable Handles

  • Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with either a Tapped or Reamed Hole.
  • These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the insert remains stationary.
  • Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.
Handles - Adjustable Tapped and Reamed

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Handles - Adjustable Tapped and Reamed category on the Small Parts & Bearings online store.
Thread (A) Material Handle Length (L) Hub Diameter (E) Total Height (H) Hub Height (F) Indicative
Image
Thread (A)
M4 (4x0.7mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Total Height (H)
31.0
mm
Hub Height (F)
4.0
mm
Adjustable Tapped and Reamed Handles - M4 -4x0.7mm- Plastic with Fireglass reinforcements 40 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-201RS Adjustable Tapped and Reamed Handles - M4 - 4x0.7mm - Plastic with Fireglass reinforcements 40 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$12.86 AUD
$15.44 AUD $12.86 AUD
Each
Thread (A) Material Handle Length (L) Hub Diameter (E) Indicative
Image
Thread (A)
M4 (4x0.7mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Adjustable Tapped and Reamed Handles - M4 -4x0.7mm- Plastic with Fireglass reinforcements 40 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 31.0 mm    Hub Height (F): 4.0 mm    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-201RS Adjustable Tapped and Reamed Handles - M4 - 4x0.7mm - Plastic with Fireglass reinforcements 40 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$12.86 AUD
$15.44 AUD $12.86 AUD
Each
View the product page first if you are unsure.
Thread (A)
M5 (5x0.8mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Total Height (H)
31.0
mm
Hub Height (F)
4.0
mm
Adjustable Tapped and Reamed Handles - M5 -5x0.8mm- Plastic with Fireglass reinforcements 40 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-202RS Adjustable Tapped and Reamed Handles - M5 - 5x0.8mm - Plastic with Fireglass reinforcements 40 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$12.86 AUD
$15.44 AUD $12.86 AUD
Each
Thread (A)
M5 (5x0.8mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Adjustable Tapped and Reamed Handles - M5 -5x0.8mm- Plastic with Fireglass reinforcements 40 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 31.0 mm    Hub Height (F): 4.0 mm    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-202RS Adjustable Tapped and Reamed Handles - M5 - 5x0.8mm - Plastic with Fireglass reinforcements 40 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$12.86 AUD
$15.44 AUD $12.86 AUD
Each
View the product page first if you are unsure.
Thread (A)
M5 (5x0.8mm)

Material
Powder coated Zinc

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Total Height (H)
31.0
mm
Hub Height (F)
4.0
mm
Adjustable Tapped and Reamed Handles - M5 -5x0.8mm- Powder coated Zinc 40 mm
Material: Powder coated Zinc    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-2RS Adjustable Tapped and Reamed Handles - M5 - 5x0.8mm - Powder coated Zinc 40 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$18.14 AUD
$21.76 AUD $18.14 AUD
Each
Thread (A)
M5 (5x0.8mm)

Material
Powder coated Zinc

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Adjustable Tapped and Reamed Handles - M5 -5x0.8mm- Powder coated Zinc 40 mm
Material: Powder coated Zinc    Total Height (H): 31.0 mm    Hub Height (F): 4.0 mm    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-2RS Adjustable Tapped and Reamed Handles - M5 - 5x0.8mm - Powder coated Zinc 40 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$18.14 AUD
$21.76 AUD $18.14 AUD
Each
View the product page first if you are unsure.
Thread (A)
M6 (6x1mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Total Height (H)
31.0
mm
Hub Height (F)
4.0
mm
Adjustable Tapped and Reamed Handles - M6 -6x1mm- Plastic with Fireglass reinforcements 40 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-204RS Adjustable Tapped and Reamed Handles - M6 - 6x1mm - Plastic with Fireglass reinforcements 40 mm
4 Available Now | Further orders can be expected around Sat, Aug 16, 2025
$9.95 AUD
$11.95 AUD $9.95 AUD
Each
Thread (A)
M6 (6x1mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Adjustable Tapped and Reamed Handles - M6 -6x1mm- Plastic with Fireglass reinforcements 40 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 31.0 mm    Hub Height (F): 4.0 mm    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-204RS Adjustable Tapped and Reamed Handles - M6 - 6x1mm - Plastic with Fireglass reinforcements 40 mm
4 Available Now | Further orders can be expected around Sat, Aug 16, 2025
$9.95 AUD
$11.95 AUD $9.95 AUD
Each
View the product page first if you are unsure.
Thread (A)
M6 (6x1mm)

Material
Powder coated Zinc

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Total Height (H)
31.0
mm
Hub Height (F)
4.0
mm
Adjustable Tapped and Reamed Handles - M6 -6x1mm- Powder coated Zinc 40 mm
Material: Powder coated Zinc    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-4RS Adjustable Tapped and Reamed Handles - M6 - 6x1mm - Powder coated Zinc 40 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$21.77 AUD
$26.13 AUD $21.77 AUD
Each
Thread (A)
M6 (6x1mm)

Material
Powder coated Zinc

Handle Length (L)
40.0
mm

(Equiv. 1.575 in.)
Hub Diameter (E)
10.0
mm
Adjustable Tapped and Reamed Handles - M6 -6x1mm- Powder coated Zinc 40 mm
Material: Powder coated Zinc    Total Height (H): 31.0 mm    Hub Height (F): 4.0 mm    Base Height (J): 24.0 mm    Handle Diameter (D): 13.5 mm    Thread Depth (B): 9.0 mm   
Part Number: KHD-4RS Adjustable Tapped and Reamed Handles - M6 - 6x1mm - Powder coated Zinc 40 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$21.77 AUD
$26.13 AUD $21.77 AUD
Each
View the product page first if you are unsure.
Thread (A)
M6 (6x1mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
65.0
mm

(Equiv. 2.559 in.)
Hub Diameter (E)
13.5
mm
Total Height (H)
43.0
mm
Hub Height (F)
6.5
mm
Adjustable Tapped and Reamed Handles - M6 -6x1mm- Plastic with Fireglass reinforcements 65 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 29.0 mm    Handle Diameter (D): 18.0 mm    Thread Depth (B): 12.0 mm   
Part Number: KHD-208RS Adjustable Tapped and Reamed Handles - M6 - 6x1mm - Plastic with Fireglass reinforcements 65 mm
4 Available Now | Further orders can be expected around Sat, Aug 16, 2025
$18.23 AUD
$18.23 AUD
Each
Thread (A)
M6 (6x1mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
65.0
mm

(Equiv. 2.559 in.)
Hub Diameter (E)
13.5
mm
Adjustable Tapped and Reamed Handles - M6 -6x1mm- Plastic with Fireglass reinforcements 65 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 43.0 mm    Hub Height (F): 6.5 mm    Base Height (J): 29.0 mm    Handle Diameter (D): 18.0 mm    Thread Depth (B): 12.0 mm   
Part Number: KHD-208RS Adjustable Tapped and Reamed Handles - M6 - 6x1mm - Plastic with Fireglass reinforcements 65 mm
4 Available Now | Further orders can be expected around Sat, Aug 16, 2025
$18.23 AUD
$18.23 AUD
Each
View the product page first if you are unsure.
Thread (A)
M6 (6x1mm)

Material
Powder coated Zinc

Handle Length (L)
65.0
mm

(Equiv. 2.559 in.)
Hub Diameter (E)
13.5
mm
Total Height (H)
43.0
mm
Hub Height (F)
6.5
mm
Adjustable Tapped and Reamed Handles - M6 -6x1mm- Powder coated Zinc 65 mm
Material: Powder coated Zinc    Base Height (J): 29.0 mm    Handle Diameter (D): 18.0 mm    Thread Depth (B): 12.0 mm   
Part Number: KHD-8RS Adjustable Tapped and Reamed Handles - M6 - 6x1mm - Powder coated Zinc 65 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$24.32 AUD
$29.18 AUD $24.32 AUD
Each
Thread (A)
M6 (6x1mm)

Material
Powder coated Zinc

Handle Length (L)
65.0
mm

(Equiv. 2.559 in.)
Hub Diameter (E)
13.5
mm
Adjustable Tapped and Reamed Handles - M6 -6x1mm- Powder coated Zinc 65 mm
Material: Powder coated Zinc    Total Height (H): 43.0 mm    Hub Height (F): 6.5 mm    Base Height (J): 29.0 mm    Handle Diameter (D): 18.0 mm    Thread Depth (B): 12.0 mm   
Part Number: KHD-8RS Adjustable Tapped and Reamed Handles - M6 - 6x1mm - Powder coated Zinc 65 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$24.32 AUD
$29.18 AUD $24.32 AUD
Each
View the product page first if you are unsure.
Thread (A)
M8 (8x1.25mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
65.0
mm

(Equiv. 2.559 in.)
Hub Diameter (E)
13.5
mm
Total Height (H)
43.0
mm
Hub Height (F)
6.5
mm
Adjustable Tapped and Reamed Handles - M8 -8x1.25mm- Plastic with Fireglass reinforcements 65 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 29.0 mm    Handle Diameter (D): 18.0 mm    Thread Depth (B): 12.0 mm   
Part Number: KHD-210RS Adjustable Tapped and Reamed Handles - M8 - 8x1.25mm - Plastic with Fireglass reinforcements 65 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$18.77 AUD
$18.77 AUD
Each
Thread (A)
M8 (8x1.25mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
65.0
mm

(Equiv. 2.559 in.)
Hub Diameter (E)
13.5
mm
Adjustable Tapped and Reamed Handles - M8 -8x1.25mm- Plastic with Fireglass reinforcements 65 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 43.0 mm    Hub Height (F): 6.5 mm    Base Height (J): 29.0 mm    Handle Diameter (D): 18.0 mm    Thread Depth (B): 12.0 mm   
Part Number: KHD-210RS Adjustable Tapped and Reamed Handles - M8 - 8x1.25mm - Plastic with Fireglass reinforcements 65 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$18.77 AUD
$18.77 AUD
Each
View the product page first if you are unsure.
Thread (A)
M8 (8x1.25mm)

Material
Powder coated Zinc

Handle Length (L)
65.0
mm

(Equiv. 2.559 in.)
Hub Diameter (E)
13.5
mm
Total Height (H)
43.0
mm
Hub Height (F)
6.5
mm
Adjustable Tapped and Reamed Handles - M8 -8x1.25mm- Powder coated Zinc 65 mm
Material: Powder coated Zinc    Base Height (J): 29.0 mm    Handle Diameter (D): 18.0 mm    Thread Depth (B): 12.0 mm   
Part Number: KHD-10RS Adjustable Tapped and Reamed Handles - M8 - 8x1.25mm - Powder coated Zinc 65 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$25.23 AUD
$30.27 AUD $25.23 AUD
Each
Thread (A)
M8 (8x1.25mm)

Material
Powder coated Zinc

Handle Length (L)
65.0
mm

(Equiv. 2.559 in.)
Hub Diameter (E)
13.5
mm
Adjustable Tapped and Reamed Handles - M8 -8x1.25mm- Powder coated Zinc 65 mm
Material: Powder coated Zinc    Total Height (H): 43.0 mm    Hub Height (F): 6.5 mm    Base Height (J): 29.0 mm    Handle Diameter (D): 18.0 mm    Thread Depth (B): 12.0 mm   
Part Number: KHD-10RS Adjustable Tapped and Reamed Handles - M8 - 8x1.25mm - Powder coated Zinc 65 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$25.23 AUD
$30.27 AUD $25.23 AUD
Each
View the product page first if you are unsure.
Thread (A)
M8 (8x1.25mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
80.0
mm

(Equiv. 3.15 in.)
Hub Diameter (E)
16.0
mm
Total Height (H)
55.0
mm
Hub Height (F)
10.0
mm
Adjustable Tapped and Reamed Handles - M8 -8x1.25mm- Plastic with Fireglass reinforcements 80 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 37.5 mm    Handle Diameter (D): 21.5 mm    Thread Depth (B): 14.0 mm   
Part Number: KHD-214RS Adjustable Tapped and Reamed Handles - M8 - 8x1.25mm - Plastic with Fireglass reinforcements 80 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$20.68 AUD
$24.82 AUD $20.68 AUD
Each
Thread (A)
M8 (8x1.25mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
80.0
mm

(Equiv. 3.15 in.)
Hub Diameter (E)
16.0
mm
Adjustable Tapped and Reamed Handles - M8 -8x1.25mm- Plastic with Fireglass reinforcements 80 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 55.0 mm    Hub Height (F): 10.0 mm    Base Height (J): 37.5 mm    Handle Diameter (D): 21.5 mm    Thread Depth (B): 14.0 mm   
Part Number: KHD-214RS Adjustable Tapped and Reamed Handles - M8 - 8x1.25mm - Plastic with Fireglass reinforcements 80 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$20.68 AUD
$24.82 AUD $20.68 AUD
Each
View the product page first if you are unsure.
Thread (A)
M8 (8x1.25mm)

Material
Powder coated Zinc

Handle Length (L)
80.0
mm

(Equiv. 3.15 in.)
Hub Diameter (E)
16.0
mm
Total Height (H)
55.0
mm
Hub Height (F)
10.0
mm
Adjustable Tapped and Reamed Handles - M8 -8x1.25mm- Powder coated Zinc 80 mm
Material: Powder coated Zinc    Base Height (J): 37.5 mm    Handle Diameter (D): 21.5 mm    Thread Depth (B): 14.0 mm   
Part Number: KHD-14RS Adjustable Tapped and Reamed Handles - M8 - 8x1.25mm - Powder coated Zinc 80 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$29.05 AUD
$34.85 AUD $29.05 AUD
Each
Thread (A)
M8 (8x1.25mm)

Material
Powder coated Zinc

Handle Length (L)
80.0
mm

(Equiv. 3.15 in.)
Hub Diameter (E)
16.0
mm
Adjustable Tapped and Reamed Handles - M8 -8x1.25mm- Powder coated Zinc 80 mm
Material: Powder coated Zinc    Total Height (H): 55.0 mm    Hub Height (F): 10.0 mm    Base Height (J): 37.5 mm    Handle Diameter (D): 21.5 mm    Thread Depth (B): 14.0 mm   
Part Number: KHD-14RS Adjustable Tapped and Reamed Handles - M8 - 8x1.25mm - Powder coated Zinc 80 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$29.05 AUD
$34.85 AUD $29.05 AUD
Each
View the product page first if you are unsure.
Thread (A)
M10 (10x1.5mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
80.0
mm

(Equiv. 3.15 in.)
Hub Diameter (E)
16.0
mm
Total Height (H)
55.0
mm
Hub Height (F)
10.0
mm
Adjustable Tapped and Reamed Handles - M10 -10x1.5mm- Plastic with Fireglass reinforcements 80 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 37.5 mm    Handle Diameter (D): 21.5 mm    Thread Depth (B): 14.0 mm   
Part Number: KHD-216RS Adjustable Tapped and Reamed Handles - M10 - 10x1.5mm - Plastic with Fireglass reinforcements 80 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$20.50 AUD
$24.60 AUD $20.50 AUD
Each
Thread (A)
M10 (10x1.5mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
80.0
mm

(Equiv. 3.15 in.)
Hub Diameter (E)
16.0
mm
Adjustable Tapped and Reamed Handles - M10 -10x1.5mm- Plastic with Fireglass reinforcements 80 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 55.0 mm    Hub Height (F): 10.0 mm    Base Height (J): 37.5 mm    Handle Diameter (D): 21.5 mm    Thread Depth (B): 14.0 mm   
Part Number: KHD-216RS Adjustable Tapped and Reamed Handles - M10 - 10x1.5mm - Plastic with Fireglass reinforcements 80 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$20.50 AUD
$24.60 AUD $20.50 AUD
Each
View the product page first if you are unsure.
Thread (A)
M10 (10x1.5mm)

Material
Powder coated Zinc

Handle Length (L)
80.0
mm

(Equiv. 3.15 in.)
Hub Diameter (E)
16.0
mm
Total Height (H)
55.0
mm
Hub Height (F)
10.0
mm
Adjustable Tapped and Reamed Handles - M10 -10x1.5mm- Powder coated Zinc 80 mm
Material: Powder coated Zinc    Base Height (J): 37.5 mm    Handle Diameter (D): 21.5 mm    Thread Depth (B): 14.0 mm   
Part Number: KHD-16RS Adjustable Tapped and Reamed Handles - M10 - 10x1.5mm - Powder coated Zinc 80 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$28.68 AUD
$34.42 AUD $28.68 AUD
Each
Thread (A)
M10 (10x1.5mm)

Material
Powder coated Zinc

Handle Length (L)
80.0
mm

(Equiv. 3.15 in.)
Hub Diameter (E)
16.0
mm
Adjustable Tapped and Reamed Handles - M10 -10x1.5mm- Powder coated Zinc 80 mm
Material: Powder coated Zinc    Total Height (H): 55.0 mm    Hub Height (F): 10.0 mm    Base Height (J): 37.5 mm    Handle Diameter (D): 21.5 mm    Thread Depth (B): 14.0 mm   
Part Number: KHD-16RS Adjustable Tapped and Reamed Handles - M10 - 10x1.5mm - Powder coated Zinc 80 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$28.68 AUD
$34.42 AUD $28.68 AUD
Each
View the product page first if you are unsure.
Thread (A)
M10 (10x1.5mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
95.0
mm

(Equiv. 3.74 in.)
Hub Diameter (E)
19.0
mm
Total Height (H)
64.0
mm
Hub Height (F)
10.0
mm
Adjustable Tapped and Reamed Handles - M10 -10x1.5mm- Plastic with Fireglass reinforcements 95 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 42.5 mm    Handle Diameter (D): 25.5 mm    Thread Depth (B): 17.0 mm   
Part Number: KHD-220RS Adjustable Tapped and Reamed Handles - M10 - 10x1.5mm - Plastic with Fireglass reinforcements 95 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$27.14 AUD
$32.56 AUD $27.14 AUD
Each
Thread (A)
M10 (10x1.5mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
95.0
mm

(Equiv. 3.74 in.)
Hub Diameter (E)
19.0
mm
Adjustable Tapped and Reamed Handles - M10 -10x1.5mm- Plastic with Fireglass reinforcements 95 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 64.0 mm    Hub Height (F): 10.0 mm    Base Height (J): 42.5 mm    Handle Diameter (D): 25.5 mm    Thread Depth (B): 17.0 mm   
Part Number: KHD-220RS Adjustable Tapped and Reamed Handles - M10 - 10x1.5mm - Plastic with Fireglass reinforcements 95 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$27.14 AUD
$32.56 AUD $27.14 AUD
Each
View the product page first if you are unsure.
Thread (A)
M10 (10x1.5mm)

Material
Powder coated Zinc

Handle Length (L)
95.0
mm

(Equiv. 3.74 in.)
Hub Diameter (E)
19.0
mm
Total Height (H)
64.0
mm
Hub Height (F)
10.0
mm
Adjustable Tapped and Reamed Handles - M10 -10x1.5mm- Powder coated Zinc 95 mm
Material: Powder coated Zinc    Base Height (J): 42.5 mm    Handle Diameter (D): 25.5 mm    Thread Depth (B): 17.0 mm   
Part Number: KHD-20RS Adjustable Tapped and Reamed Handles - M10 - 10x1.5mm - Powder coated Zinc 95 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$39.50 AUD
$47.40 AUD $39.50 AUD
Each
Thread (A)
M10 (10x1.5mm)

Material
Powder coated Zinc

Handle Length (L)
95.0
mm

(Equiv. 3.74 in.)
Hub Diameter (E)
19.0
mm
Adjustable Tapped and Reamed Handles - M10 -10x1.5mm- Powder coated Zinc 95 mm
Material: Powder coated Zinc    Total Height (H): 64.0 mm    Hub Height (F): 10.0 mm    Base Height (J): 42.5 mm    Handle Diameter (D): 25.5 mm    Thread Depth (B): 17.0 mm   
Part Number: KHD-20RS Adjustable Tapped and Reamed Handles - M10 - 10x1.5mm - Powder coated Zinc 95 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$39.50 AUD
$47.40 AUD $39.50 AUD
Each
View the product page first if you are unsure.
Thread (A)
M12 (12x1.75mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
95.0
mm

(Equiv. 3.74 in.)
Hub Diameter (E)
19.0
mm
Total Height (H)
64.0
mm
Hub Height (F)
10.0
mm
Adjustable Tapped and Reamed Handles - M12 -12x1.75mm- Plastic with Fireglass reinforcements 95 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 42.5 mm    Handle Diameter (D): 25.5 mm    Thread Depth (B): 17.0 mm   
Part Number: KHD-222RS Adjustable Tapped and Reamed Handles - M12 - 12x1.75mm - Plastic with Fireglass reinforcements 95 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$26.77 AUD
$32.13 AUD $26.77 AUD
Each
Thread (A)
M12 (12x1.75mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
95.0
mm

(Equiv. 3.74 in.)
Hub Diameter (E)
19.0
mm
Adjustable Tapped and Reamed Handles - M12 -12x1.75mm- Plastic with Fireglass reinforcements 95 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 64.0 mm    Hub Height (F): 10.0 mm    Base Height (J): 42.5 mm    Handle Diameter (D): 25.5 mm    Thread Depth (B): 17.0 mm   
Part Number: KHD-222RS Adjustable Tapped and Reamed Handles - M12 - 12x1.75mm - Plastic with Fireglass reinforcements 95 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$26.77 AUD
$32.13 AUD $26.77 AUD
Each
View the product page first if you are unsure.
Thread (A)
M12 (12x1.75mm)

Material
Powder coated Zinc

Handle Length (L)
95.0
mm

(Equiv. 3.74 in.)
Hub Diameter (E)
19.0
mm
Total Height (H)
64.0
mm
Hub Height (F)
10.0
mm
Adjustable Tapped and Reamed Handles - M12 -12x1.75mm- Powder coated Zinc 95 mm
Material: Powder coated Zinc    Base Height (J): 42.5 mm    Handle Diameter (D): 25.5 mm    Thread Depth (B): 17.0 mm   
Part Number: KHD-22RS Adjustable Tapped and Reamed Handles - M12 - 12x1.75mm - Powder coated Zinc 95 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$36.41 AUD
$43.69 AUD $36.41 AUD
Each
Thread (A)
M12 (12x1.75mm)

Material
Powder coated Zinc

Handle Length (L)
95.0
mm

(Equiv. 3.74 in.)
Hub Diameter (E)
19.0
mm
Adjustable Tapped and Reamed Handles - M12 -12x1.75mm- Powder coated Zinc 95 mm
Material: Powder coated Zinc    Total Height (H): 64.0 mm    Hub Height (F): 10.0 mm    Base Height (J): 42.5 mm    Handle Diameter (D): 25.5 mm    Thread Depth (B): 17.0 mm   
Part Number: KHD-22RS Adjustable Tapped and Reamed Handles - M12 - 12x1.75mm - Powder coated Zinc 95 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$36.41 AUD
$43.69 AUD $36.41 AUD
Each
View the product page first if you are unsure.
Thread (A)
M12 (12x1.75mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
110.0
mm

(Equiv. 4.331 in.)
Hub Diameter (E)
23.0
mm
Total Height (H)
75.0
mm
Hub Height (F)
12.0
mm
Adjustable Tapped and Reamed Handles - M12 -12x1.75mm- Plastic with Fireglass reinforcements 110 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 51.0 mm    Handle Diameter (D): 30.5 mm    Thread Depth (B): 23.0 mm   
Part Number: KHD-223RS Adjustable Tapped and Reamed Handles - M12 - 12x1.75mm - Plastic with Fireglass reinforcements 110 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$34.23 AUD
$41.07 AUD $34.23 AUD
Each
Thread (A)
M12 (12x1.75mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
110.0
mm

(Equiv. 4.331 in.)
Hub Diameter (E)
23.0
mm
Adjustable Tapped and Reamed Handles - M12 -12x1.75mm- Plastic with Fireglass reinforcements 110 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 75.0 mm    Hub Height (F): 12.0 mm    Base Height (J): 51.0 mm    Handle Diameter (D): 30.5 mm    Thread Depth (B): 23.0 mm   
Part Number: KHD-223RS Adjustable Tapped and Reamed Handles - M12 - 12x1.75mm - Plastic with Fireglass reinforcements 110 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$34.23 AUD
$41.07 AUD $34.23 AUD
Each
View the product page first if you are unsure.
Thread (A)
M12 (12x1.75mm)

Material
Powder coated Zinc

Handle Length (L)
110.0
mm

(Equiv. 4.331 in.)
Hub Diameter (E)
23.0
mm
Total Height (H)
75.0
mm
Hub Height (F)
12.0
mm
Adjustable Tapped and Reamed Handles - M12 -12x1.75mm- Powder coated Zinc 110 mm
Material: Powder coated Zinc    Base Height (J): 51.0 mm    Handle Diameter (D): 30.5 mm    Thread Depth (B): 23.0 mm   
Part Number: KHD-26RS Adjustable Tapped and Reamed Handles - M12 - 12x1.75mm - Powder coated Zinc 110 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$51.95 AUD
$62.35 AUD $51.95 AUD
Each
Thread (A)
M12 (12x1.75mm)

Material
Powder coated Zinc

Handle Length (L)
110.0
mm

(Equiv. 4.331 in.)
Hub Diameter (E)
23.0
mm
Adjustable Tapped and Reamed Handles - M12 -12x1.75mm- Powder coated Zinc 110 mm
Material: Powder coated Zinc    Total Height (H): 75.0 mm    Hub Height (F): 12.0 mm    Base Height (J): 51.0 mm    Handle Diameter (D): 30.5 mm    Thread Depth (B): 23.0 mm   
Part Number: KHD-26RS Adjustable Tapped and Reamed Handles - M12 - 12x1.75mm - Powder coated Zinc 110 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$51.95 AUD
$62.35 AUD $51.95 AUD
Each
View the product page first if you are unsure.
Thread (A)
M16 (16x2mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
110.0
mm

(Equiv. 4.331 in.)
Hub Diameter (E)
23.0
mm
Total Height (H)
75.0
mm
Hub Height (F)
12.0
mm
Adjustable Tapped and Reamed Handles - M16 -16x2mm- Plastic with Fireglass reinforcements 110 mm
Material: Plastic with Fireglass reinforcements    Base Height (J): 51.0 mm    Handle Diameter (D): 30.5 mm    Thread Depth (B): 23.0 mm   
Part Number: KHD-225RS Adjustable Tapped and Reamed Handles - M16 - 16x2mm - Plastic with Fireglass reinforcements 110 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$33.23 AUD
$39.87 AUD $33.23 AUD
Each
Thread (A)
M16 (16x2mm)

Material
Plastic with Fireglass reinforcements

Handle Length (L)
110.0
mm

(Equiv. 4.331 in.)
Hub Diameter (E)
23.0
mm
Adjustable Tapped and Reamed Handles - M16 -16x2mm- Plastic with Fireglass reinforcements 110 mm
Material: Plastic with Fireglass reinforcements    Total Height (H): 75.0 mm    Hub Height (F): 12.0 mm    Base Height (J): 51.0 mm    Handle Diameter (D): 30.5 mm    Thread Depth (B): 23.0 mm   
Part Number: KHD-225RS Adjustable Tapped and Reamed Handles - M16 - 16x2mm - Plastic with Fireglass reinforcements 110 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$33.23 AUD
$39.87 AUD $33.23 AUD
Each
View the product page first if you are unsure.
Thread (A)
M16 (16x2mm)

Material
Powder coated Zinc

Handle Length (L)
110.0
mm

(Equiv. 4.331 in.)
Hub Diameter (E)
23.0
mm
Total Height (H)
75.0
mm
Hub Height (F)
12.0
mm
Adjustable Tapped and Reamed Handles - M16 -16x2mm- Powder coated Zinc 110 mm
Material: Powder coated Zinc    Base Height (J): 51.0 mm    Handle Diameter (D): 30.5 mm    Thread Depth (B): 23.0 mm   
Part Number: KHD-28RS Adjustable Tapped and Reamed Handles - M16 - 16x2mm - Powder coated Zinc 110 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$49.41 AUD
$59.29 AUD $49.41 AUD
Each
Thread (A)
M16 (16x2mm)

Material
Powder coated Zinc

Handle Length (L)
110.0
mm

(Equiv. 4.331 in.)
Hub Diameter (E)
23.0
mm
Adjustable Tapped and Reamed Handles - M16 -16x2mm- Powder coated Zinc 110 mm
Material: Powder coated Zinc    Total Height (H): 75.0 mm    Hub Height (F): 12.0 mm    Base Height (J): 51.0 mm    Handle Diameter (D): 30.5 mm    Thread Depth (B): 23.0 mm   
Part Number: KHD-28RS Adjustable Tapped and Reamed Handles - M16 - 16x2mm - Powder coated Zinc 110 mm
Out of Stock | Backorder Now | Orders can be expected around Sat, Aug 16, 2025
$49.41 AUD
$59.29 AUD $49.41 AUD
Each
View the product page first if you are unsure.