Gears - Worm Sets - Module 1

9 Products in this selection
  • Acetal gear and steel worm sets.
  • Metric sets only.
  • This is the main category in this series
Additional resources:
A more concise listing may be found on the Smallparts store at Gears - Worm Sets - Module 1. Smallparts promote the most popular MBA products.
Pitch Teeth Bore (dd) Direction Lead Angle Face Width (b) Indicative
Image
1.0
20
5.00
mm 		Right Hand
1
10.00
mm 		Worm Sets Gears - 1 x 20 x 5 mm
Material: Polyacetal and Steel    Hub Diameter: 17.00 mm    Centre Distance (A): 18 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 23.5   
Part Number: WGS1-100-020-050-R-ACS Worm Sets Gears - Pitch 1 - 20 - 5 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$35.59 AUD
$35.59 AUD
Each
Pitch Teeth Bore (dd) Direction Indicative
Image
1.0
20
5.00
mm 		Right Hand
Worm Sets Gears - 1 x 20 x 5 mm
Material: Polyacetal and Steel    Lead Angle: 1    Face Width (b): 10.00 mm    Hub Diameter: 17.00 mm    Centre Distance (A): 18 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 23.5   
Part Number: WGS1-100-020-050-R-ACS Worm Sets Gears - Pitch 1 - 20 - 5 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$35.59 AUD
$35.59 AUD
Each
View the product page first if you are unsure.
1.0
20
5.00
mm 		Right Hand
2
10.00
mm 		Worm Sets Gears - 1 x 20 x 5 mm
Material: Polyacetal and Steel    Hub Diameter: 17.00 mm    Centre Distance (A): 23 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 23.5   
Part Number: WGS2-100-020-050-R-ACS Worm Sets Gears - Pitch 1 - 20 - 5 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$35.59 AUD
$35.59 AUD
Each
1.0
20
5.00
mm 		Right Hand
Worm Sets Gears - 1 x 20 x 5 mm
Material: Polyacetal and Steel    Lead Angle: 2    Face Width (b): 10.00 mm    Hub Diameter: 17.00 mm    Centre Distance (A): 23 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 23.5   
Part Number: WGS2-100-020-050-R-ACS Worm Sets Gears - Pitch 1 - 20 - 5 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$35.59 AUD
$35.59 AUD
Each
View the product page first if you are unsure.
1.0
30
6.00
mm 		Right Hand
1
10.00
mm 		Worm Sets Gears - 1 x 30 x 6 mm
Material: Polyacetal and Steel    Hub Diameter: 22.00 mm    Centre Distance (A): 23 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 33.5   
Part Number: WGS1-100-030-060-R-ACS Worm Sets Gears - Pitch 1 - 30 - 6 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$43.05 AUD
$43.05 AUD
Each
1.0
30
6.00
mm 		Right Hand
Worm Sets Gears - 1 x 30 x 6 mm
Material: Polyacetal and Steel    Lead Angle: 1    Face Width (b): 10.00 mm    Hub Diameter: 22.00 mm    Centre Distance (A): 23 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 33.5   
Part Number: WGS1-100-030-060-R-ACS Worm Sets Gears - Pitch 1 - 30 - 6 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$43.05 AUD
$43.05 AUD
Each
View the product page first if you are unsure.
1.0
30
6.00
mm 		Right Hand
2
10.00
mm 		Worm Sets Gears - 1 x 30 x 6 mm
Material: Polyacetal and Steel    Hub Diameter: 22.00 mm    Centre Distance (A): 28 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 33.5   
Part Number: WGS2-100-030-060-R-ACS Worm Sets Gears - Pitch 1 - 30 - 6 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$43.05 AUD
$43.05 AUD
Each
1.0
30
6.00
mm 		Right Hand
Worm Sets Gears - 1 x 30 x 6 mm
Material: Polyacetal and Steel    Lead Angle: 2    Face Width (b): 10.00 mm    Hub Diameter: 22.00 mm    Centre Distance (A): 28 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 33.5   
Part Number: WGS2-100-030-060-R-ACS Worm Sets Gears - Pitch 1 - 30 - 6 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$43.05 AUD
$43.05 AUD
Each
View the product page first if you are unsure.
1.0
40
8.00
mm 		Right Hand
1
10.00
mm 		Worm Sets Gears - 1 x 40 x 8 mm
Material: Polyacetal and Steel    Hub Diameter: 30.00 mm    Centre Distance (A): 33 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 43.5   
Part Number: WGS1-100-040-080-R-ACS Worm Sets Gears - Pitch 1 - 40 - 8 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$46.86 AUD
$46.86 AUD
Each
1.0
40
8.00
mm 		Right Hand
Worm Sets Gears - 1 x 40 x 8 mm
Material: Polyacetal and Steel    Lead Angle: 1    Face Width (b): 10.00 mm    Hub Diameter: 30.00 mm    Centre Distance (A): 33 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 43.5   
Part Number: WGS1-100-040-080-R-ACS Worm Sets Gears - Pitch 1 - 40 - 8 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$46.86 AUD
$46.86 AUD
Each
View the product page first if you are unsure.
1.0
50
8.00
mm 		Right Hand
1
10.00
mm 		Worm Sets Gears - 1 x 50 x 8 mm
Material: Polyacetal and Steel    Hub Diameter: 35.00 mm    Centre Distance (A): 38 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 53.5   
Part Number: WGS1-100-050-080-R-ACS Worm Sets Gears - Pitch 1 - 50 - 8 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$57.23 AUD
$57.23 AUD
Each
1.0
50
8.00
mm 		Right Hand
Worm Sets Gears - 1 x 50 x 8 mm
Material: Polyacetal and Steel    Lead Angle: 1    Face Width (b): 10.00 mm    Hub Diameter: 35.00 mm    Centre Distance (A): 38 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 53.5   
Part Number: WGS1-100-050-080-R-ACS Worm Sets Gears - Pitch 1 - 50 - 8 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$57.23 AUD
$57.23 AUD
Each
View the product page first if you are unsure.
1.0
60
8.00
mm 		Right Hand
1
10.00
mm 		Worm Sets Gears - 1 x 60 x 8 mm
Material: Polyacetal and Steel    Hub Diameter: 40.00 mm    Centre Distance (A): 48 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 63.5   
Part Number: WGS1-100-060-080-R-ACS Worm Sets Gears - Pitch 1 - 60 - 8 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$72.32 AUD
$72.32 AUD
Each
1.0
60
8.00
mm 		Right Hand
Worm Sets Gears - 1 x 60 x 8 mm
Material: Polyacetal and Steel    Lead Angle: 1    Face Width (b): 10.00 mm    Hub Diameter: 40.00 mm    Centre Distance (A): 48 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 63.5   
Part Number: WGS1-100-060-080-R-ACS Worm Sets Gears - Pitch 1 - 60 - 8 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$72.32 AUD
$72.32 AUD
Each
View the product page first if you are unsure.
1.0
80
10.00
mm 		Right Hand
1
10.00
mm 		Worm Sets Gears - 1 x 80 x 10 mm
Material: Polyacetal and Steel    Hub Diameter: 50.00 mm    Centre Distance (A): 58 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 83.5   
Part Number: WGS1-100-080-100-R-ACS Worm Sets Gears - Pitch 1 - 80 - 10 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$102.95 AUD
$102.95 AUD
Each
1.0
80
10.00
mm 		Right Hand
Worm Sets Gears - 1 x 80 x 10 mm
Material: Polyacetal and Steel    Lead Angle: 1    Face Width (b): 10.00 mm    Hub Diameter: 50.00 mm    Centre Distance (A): 58 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 83.5   
Part Number: WGS1-100-080-100-R-ACS Worm Sets Gears - Pitch 1 - 80 - 10 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$102.95 AUD
$102.95 AUD
Each
View the product page first if you are unsure.
1.0
100
10.00
mm 		Right Hand
1
10.00
mm 		Worm Sets Gears - 1 x 100 x 10 mm
Material: Polyacetal and Steel    Hub Diameter: 60.00 mm    Centre Distance (A): 58 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 103.5   
Part Number: WGS1-100-100-100-R-ACS Worm Sets Gears - Pitch 1 - 100 - 10 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$147.23 AUD
$147.23 AUD
Each
1.0
100
10.00
mm 		Right Hand
Worm Sets Gears - 1 x 100 x 10 mm
Material: Polyacetal and Steel    Lead Angle: 1    Face Width (b): 10.00 mm    Hub Diameter: 60.00 mm    Centre Distance (A): 58 mm    Gear Length (l): 18 mm    Hub Projection (lh): 8 mm    Tip Diameter (da): 103.5   
Part Number: WGS1-100-100-100-R-ACS Worm Sets Gears - Pitch 1 - 100 - 10 mm - Polyacetal and Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, May 23, 2025
$147.23 AUD
$147.23 AUD
Each
View the product page first if you are unsure.