Gears - Spur - Hubless - 32DP - Brass - 14.5 Degree PA

Gears -> Spur -> Hubless -> 32DP -> Brass -> 14.5 Degree PA

There is only 1 product in the sub-categories of Gears - Spur - Hubless - 32DP - Brass - 14.5 Degree PA. Browse the Gears - Spur - Hubless - 32DP - Brass - 14.5 Degree PA products table.

Category Details

A selection of 14.5 Degree PA Brass 32DP Hubless Spur Gears. PCD in mm = No. of Teeth x 0.79375 (1/32 in.). 14.5 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

  • There are more items available in this range than currently listed. Please enquire if you have special requirements. Expanded range includes hardened gears, stainless steel, antibacklash, and special bore sizes.
  • Be sure to match the pitch type and tooth angle when selecting spur gears.
  • An expanded range may be available on special order. Please enquire.
  • The diameter increases by 1 inch for every 32 teeth
  • 32 Diametrical Pitch. Approx 2.49mm between the teeth.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Spur - Hubless - 32DP - Brass - 14.5 Degree PA category on the Small Parts & Bearings online store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Spur Gears - 6 tooth - 4.78x1.588 mm Hubless - Brass Gear
Number of Teeth
6
Pitch Circle Diameter (PD)
4.78
mm
Bore (d)
1.588
mm
Outside Diameter (OD)
6.375
mm
Face Width (FW)
4.76
mm
Type
Hubless
Spur Gears - 6 tooth - 4.78x1.588 mm Hubless - Brass Gear
Material: Brass    Quality: Commercial   
Deleted Item. Available while stocks last.
Part Number: G005P-006-V32-048-016-B (Each)
Contact Us | Special Order Only - Please contact us if you need a large quantity
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Spur Gears - 6 tooth - 4.78x1.588 mm Hubless - Brass Gear
Number of Teeth
6
Pitch Circle Diameter (PD)
4.78
mm
Bore (d)
1.588
mm
Outside Diameter (OD)
6.375
mm
Spur Gears - 6 tooth - 4.78x1.588 mm Hubless - Brass Gear
Material: Brass    Face Width (FW): 4.76 mm    Type: Hubless    Quality: Commercial   
Deleted Item. Available while stocks last.
Part Number: G005P-006-V32-048-016-B (Each)
Contact Us | Special Order Only - Please contact us if you need a large quantity | Backorder now for delivery around Wed, Apr 04, 2029