Gears - Spur - Hubbed - 32DP - 14.5 Degree - Brass

Gears -> Spur -> Hubbed -> 32DP -> 14.5 Degree -> Brass

There is only 1 product in the sub-categories of Gears - Spur - Hubbed - 32DP - 14.5 Degree - Brass. Browse the Gears - Spur - Hubbed - 32DP - 14.5 Degree - Brass products table.

Category Details

A selection of Brass 14.5 Degree 32DP Hubbed Spur Gears. PCD in mm = No. of Teeth x 0.79375 (1/32 in.). 14.5 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

  • There are more items available in this range than currently listed. Please enquire if you have special requirements. Expanded range includes hardened gears, stainless steel, antibacklash, and special bore sizes.
  • Be sure to match the pitch type and tooth angle when selecting spur gears.
  • An expanded range may be available on special order. Please enquire.
  • The diameter increases by 1 inch for every 32 teeth
  • 32 Diametrical Pitch. Approx 2.49mm between the teeth.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Spur - Hubbed - 32DP - 14.5 Degree - Brass category on the Small Parts & Bearings online store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Spur Gears - 48 tooth - 38.1x6.35 mm Hubbed - Brass Gear
Number of Teeth
48
Pitch Circle Diameter (PD)
38.10
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
39.700
mm
Face Width (FW)
4.76
mm
Type
Hubbed
Spur Gears - 48 tooth - 38.1x6.35 mm Hubbed - Brass Gear
Material: Brass    Hub Diameter (D1): 12.70 mm    Hub Projection (HL): 6.35 mm    Locking Method: None    Quality: Commercial   
Part Number: G038B-048-V32-048-064-B-P (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Sep 02, 2026
$55.32 AUD
$55.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Spur Gears - 48 tooth - 38.1x6.35 mm Hubbed - Brass Gear
Number of Teeth
48
Pitch Circle Diameter (PD)
38.10
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
39.700
mm
Spur Gears - 48 tooth - 38.1x6.35 mm Hubbed - Brass Gear
Material: Brass    Face Width (FW): 4.76 mm    Type: Hubbed    Hub Diameter (D1): 12.70 mm    Hub Projection (HL): 6.35 mm    Locking Method: None    Quality: Commercial   
Part Number: G038B-048-V32-048-064-B-P (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Sep 02, 2026
$55.32 AUD
$55.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.