Bearings - Single Row Ball - Unflanged - Precision - 316 Stainless - Sealed

Bearings -> Single Row Ball -> Unflanged -> Precision -> 316 Stainless -> Sealed

There are 32 products in the sub-categories of Bearings - Single Row Ball - Unflanged - Precision - 316 Stainless - Sealed. Scroll down or follow the link to Bearings - Single Row Ball - Unflanged - Precision - 316 Stainless - Sealed in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Sealed 316 Stainless Precision Unflanged Single Row Ball Bearings. Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

  • Single row radial ball bearings are arguably the most common, widely used type of bearing. They consist of an inner ring, an outer ring, a set of balls, and a cage that retains the balls in a circular path.
  • Single row radial ball bearings are commonly used in a wide range of applications, including electric motors, fans, pumps, gearboxes, agricultural equipment, appliances, and automotive components.
  • They are versatile, cost-effective bearings that provide reliable support for radial loads and minimal axial load in one direction. An expanded range may be available on special order. Please enquire.
  • Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits.
  • Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased.
  • Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.
  • Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease.
  • Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Bearings - Single Row Ball - Unflanged - Precision - 316 Stainless - Sealed category on the Small Parts & Bearings online store.
ID (d) O.D. (D) Width (B) Inner Ring Width (Bn) Flange Diameter (DF) Flange Width (BF) Indicative
Image
Single Row Ball Bearings - 4x7x2.5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
4.000
mm
+ 0.076 / - 0.000
(Equiv. 0.157 in.)
O.D. (D)
7.000
mm
+ 0.000 / - 0.076
(Equiv. 0.276 in.)
Width (B)
2.500
mm
+ 0.127 / - 0.000
(Equiv. 0.098 in.)
Single Row Ball Bearings - 4x7x2.5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-MR74A-2PE (Each)
30 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$8.14 AUD
$9.36 AUD $8.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 30 available can be backordered.
ID (d) O.D. (D) Width (B) Inner Ring Width (Bn) Indicative
Image
Single Row Ball Bearings - 4x7x2.5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
4.000
mm
+ 0.076 / - 0.000
(Equiv. 0.157 in.)
O.D. (D)
7.000
mm
+ 0.000 / - 0.076
(Equiv. 0.276 in.)
Width (B)
2.500
mm
+ 0.127 / - 0.000
(Equiv. 0.098 in.)
Single Row Ball Bearings - 4x7x2.5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-MR74A-2PE (Each)
30 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$8.14 AUD
$9.36 AUD $8.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

30 Available Now. Backorder if more than 30.
Single Row Ball Bearings - 4.763x12.7x4.978 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
4.763
mm
+ 0.076 / - 0.000
(Equiv. 0.188 in.)
O.D. (D)
12.700
mm
+ 0.000 / - 0.076
(Equiv. 0.5 in.)
Width (B)
4.978
mm
+ 0.127 / - 0.000
(Equiv. 0.196 in.)
Single Row Ball Bearings - 4.763x12.7x4.978 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-R3C-2PE (Each)
22 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$11.86 AUD
$11.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 22 available can be backordered.
Single Row Ball Bearings - 4.763x12.7x4.978 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
4.763
mm
+ 0.076 / - 0.000
(Equiv. 0.188 in.)
O.D. (D)
12.700
mm
+ 0.000 / - 0.076
(Equiv. 0.5 in.)
Width (B)
4.978
mm
+ 0.127 / - 0.000
(Equiv. 0.196 in.)
Single Row Ball Bearings - 4.763x12.7x4.978 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-R3C-2PE (Each)
22 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$11.86 AUD
$11.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

22 Available Now. Backorder if more than 22.
Single Row Ball Bearings - 5x16x5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
5.000
mm
+ 0.076 / - 0.000
(Equiv. 0.197 in.)
O.D. (D)
16.000
mm
+ 0.000 / - 0.076
(Equiv. 0.63 in.)
Width (B)
5.000
mm
+ 0.127 / - 0.000
(Equiv. 0.197 in.)
Single Row Ball Bearings - 5x16x5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Deleted Item. Available while stocks last.
Part Number: S316-625-2PE (Each)
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.26 AUD
$9.52 AUD $8.26 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Single Row Ball Bearings - 5x16x5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
5.000
mm
+ 0.076 / - 0.000
(Equiv. 0.197 in.)
O.D. (D)
16.000
mm
+ 0.000 / - 0.076
(Equiv. 0.63 in.)
Width (B)
5.000
mm
+ 0.127 / - 0.000
(Equiv. 0.197 in.)
Single Row Ball Bearings - 5x16x5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Deleted Item. Available while stocks last.
Part Number: S316-625-2PE (Each)
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.26 AUD
$9.52 AUD $8.26 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Single Row Ball Bearings - 5x16x5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
5.000
mm
+ 0.076 / - 0.000
(Equiv. 0.197 in.)
O.D. (D)
16.000
mm
+ 0.000 / - 0.076
(Equiv. 0.63 in.)
Width (B)
5.000
mm
+ 0.127 / - 0.000
(Equiv. 0.197 in.)
Single Row Ball Bearings - 5x16x5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2TF    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-625-TF-TTS (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 21, 2026
$380.14 AUD
$454.56 AUD $380.14 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Single Row Ball Bearings - 5x16x5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
5.000
mm
+ 0.076 / - 0.000
(Equiv. 0.197 in.)
O.D. (D)
16.000
mm
+ 0.000 / - 0.076
(Equiv. 0.63 in.)
Width (B)
5.000
mm
+ 0.127 / - 0.000
(Equiv. 0.197 in.)
Single Row Ball Bearings - 5x16x5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2TF    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-625-TF-TTS (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 21, 2026
$380.14 AUD
$454.56 AUD $380.14 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Single Row Ball Bearings - 6x19x6 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
6.000
mm
+ 0.076 / - 0.000
(Equiv. 0.236 in.)
O.D. (D)
19.000
mm
+ 0.000 / - 0.076
(Equiv. 0.748 in.)
Width (B)
6.000
mm
+ 0.127 / - 0.000
(Equiv. 0.236 in.)
Single Row Ball Bearings - 6x19x6 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-626-2PE (Each)
20 Available Now | Further orders can be expected around Wed, Sep 30, 2026
$9.05 AUD
$9.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 20 available can be backordered.
Single Row Ball Bearings - 6x19x6 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
6.000
mm
+ 0.076 / - 0.000
(Equiv. 0.236 in.)
O.D. (D)
19.000
mm
+ 0.000 / - 0.076
(Equiv. 0.748 in.)
Width (B)
6.000
mm
+ 0.127 / - 0.000
(Equiv. 0.236 in.)
Single Row Ball Bearings - 6x19x6 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-626-2PE (Each)
20 Available Now | Further orders can be expected around Wed, Sep 30, 2026
$9.05 AUD
$9.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

20 Available Now. Backorder if more than 20.
Single Row Ball Bearings - 6.35x15.875x4.978 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
6.350
mm
+ 0.076 / - 0.000
(Equiv. 0.25 in.)
O.D. (D)
15.875
mm
+ 0.000 / - 0.076
(Equiv. 0.625 in.)
Width (B)
4.978
mm
+ 0.127 / - 0.000
(Equiv. 0.196 in.)
Single Row Ball Bearings - 6.35x15.875x4.978 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Deleted Item. Available while stocks last.
Part Number: S316-R4-TF-TTS (Each)
34 Available Now | Item Discontinued - Up to 34 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.69 AUD
$11.23 AUD $9.69 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

34 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Single Row Ball Bearings - 6.35x15.875x4.978 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
6.350
mm
+ 0.076 / - 0.000
(Equiv. 0.25 in.)
O.D. (D)
15.875
mm
+ 0.000 / - 0.076
(Equiv. 0.625 in.)
Width (B)
4.978
mm
+ 0.127 / - 0.000
(Equiv. 0.196 in.)
Single Row Ball Bearings - 6.35x15.875x4.978 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Deleted Item. Available while stocks last.
Part Number: S316-R4-TF-TTS (Each)
34 Available Now | Item Discontinued - Up to 34 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.69 AUD
$11.23 AUD $9.69 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

34 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Single Row Ball Bearings - 6.35x15.875x4.978 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
6.350
mm
+ 0.076 / - 0.000
(Equiv. 0.25 in.)
O.D. (D)
15.875
mm
+ 0.000 / - 0.076
(Equiv. 0.625 in.)
Width (B)
4.978
mm
+ 0.127 / - 0.000
(Equiv. 0.196 in.)
Single Row Ball Bearings - 6.35x15.875x4.978 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Deleted Item. Available while stocks last.
Part Number: S316-R4-2PE (Each)
32 Available Now | Item Discontinued - Up to 32 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.79 AUD
$10.15 AUD $8.79 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

32 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Single Row Ball Bearings - 6.35x15.875x4.978 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
6.350
mm
+ 0.076 / - 0.000
(Equiv. 0.25 in.)
O.D. (D)
15.875
mm
+ 0.000 / - 0.076
(Equiv. 0.625 in.)
Width (B)
4.978
mm
+ 0.127 / - 0.000
(Equiv. 0.196 in.)
Single Row Ball Bearings - 6.35x15.875x4.978 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Deleted Item. Available while stocks last.
Part Number: S316-R4-2PE (Each)
32 Available Now | Item Discontinued - Up to 32 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.79 AUD
$10.15 AUD $8.79 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

32 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Single Row Ball Bearings - 8x16x5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
8.000
mm
+ 0.076 / - 0.000
(Equiv. 0.315 in.)
O.D. (D)
16.000
mm
+ 0.000 / - 0.076
(Equiv. 0.63 in.)
Width (B)
5.000
mm
+ 0.127 / - 0.000
(Equiv. 0.197 in.)
Single Row Ball Bearings - 8x16x5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-688A-2PE (Each)
61 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$8.59 AUD
$8.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 61 available can be backordered.
Single Row Ball Bearings - 8x16x5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
8.000
mm
+ 0.076 / - 0.000
(Equiv. 0.315 in.)
O.D. (D)
16.000
mm
+ 0.000 / - 0.076
(Equiv. 0.63 in.)
Width (B)
5.000
mm
+ 0.127 / - 0.000
(Equiv. 0.197 in.)
Single Row Ball Bearings - 8x16x5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-688A-2PE (Each)
61 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$8.59 AUD
$8.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

61 Available Now. Backorder if more than 61.
Single Row Ball Bearings - 8x22x7 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
8.000
mm
+ 0.076 / - 0.000
(Equiv. 0.315 in.)
O.D. (D)
22.000
mm
+ 0.000 / - 0.076
(Equiv. 0.866 in.)
Width (B)
7.000
mm
+ 0.127 / - 0.000
(Equiv. 0.276 in.)
Single Row Ball Bearings - 8x22x7 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-608-2PE (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 19, 2026
$253.95 AUD
$303.15 AUD $253.95 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Single Row Ball Bearings - 8x22x7 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
8.000
mm
+ 0.076 / - 0.000
(Equiv. 0.315 in.)
O.D. (D)
22.000
mm
+ 0.000 / - 0.076
(Equiv. 0.866 in.)
Width (B)
7.000
mm
+ 0.127 / - 0.000
(Equiv. 0.276 in.)
Single Row Ball Bearings - 8x22x7 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-608-2PE (Pack of 50)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 19, 2026
$253.95 AUD
$303.15 AUD $253.95 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Single Row Ball Bearings - 8x24x8 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
8.000
mm
+ 0.076 / - 0.000
(Equiv. 0.315 in.)
O.D. (D)
24.000
mm
+ 0.000 / - 0.076
(Equiv. 0.945 in.)
Width (B)
8.000
mm
+ 0.127 / - 0.000
(Equiv. 0.315 in.)
Single Row Ball Bearings - 8x24x8 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-628-2PE (Each)
35 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$9.86 AUD
$9.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 35 available can be backordered.
Single Row Ball Bearings - 8x24x8 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
8.000
mm
+ 0.076 / - 0.000
(Equiv. 0.315 in.)
O.D. (D)
24.000
mm
+ 0.000 / - 0.076
(Equiv. 0.945 in.)
Width (B)
8.000
mm
+ 0.127 / - 0.000
(Equiv. 0.315 in.)
Single Row Ball Bearings - 8x24x8 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-628-2PE (Each)
35 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$9.86 AUD
$9.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

35 Available Now. Backorder if more than 35.
Single Row Ball Bearings - 9x24x7 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
9.000
mm
+ 0.076 / - 0.000
(Equiv. 0.354 in.)
O.D. (D)
24.000
mm
+ 0.000 / - 0.076
(Equiv. 0.945 in.)
Width (B)
7.000
mm
+ 0.127 / - 0.000
(Equiv. 0.276 in.)
Single Row Ball Bearings - 9x24x7 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-609-2PE (Each)
104 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$7.05 AUD
$8.05 AUD $7.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 104 available can be backordered.
Single Row Ball Bearings - 9x24x7 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
9.000
mm
+ 0.076 / - 0.000
(Equiv. 0.354 in.)
O.D. (D)
24.000
mm
+ 0.000 / - 0.076
(Equiv. 0.945 in.)
Width (B)
7.000
mm
+ 0.127 / - 0.000
(Equiv. 0.276 in.)
Single Row Ball Bearings - 9x24x7 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-609-2PE (Each)
104 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$7.05 AUD
$8.05 AUD $7.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

104 Available Now. Backorder if more than 104.
Single Row Ball Bearings - 10x26x8 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
10.000
mm
+ 0.076 / - 0.000
(Equiv. 0.394 in.)
O.D. (D)
26.000
mm
+ 0.000 / - 0.102
(Equiv. 1.024 in.)
Width (B)
8.000
mm
+ 0.127 / - 0.000
(Equiv. 0.315 in.)
Single Row Ball Bearings - 10x26x8 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6000-2PE (Each)
11 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$5.59 AUD
$6.51 AUD $5.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 11 available can be backordered.
Single Row Ball Bearings - 10x26x8 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
10.000
mm
+ 0.076 / - 0.000
(Equiv. 0.394 in.)
O.D. (D)
26.000
mm
+ 0.000 / - 0.102
(Equiv. 1.024 in.)
Width (B)
8.000
mm
+ 0.127 / - 0.000
(Equiv. 0.315 in.)
Single Row Ball Bearings - 10x26x8 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6000-2PE (Each)
11 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$5.59 AUD
$6.51 AUD $5.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

11 Available Now. Backorder if more than 11.
Single Row Ball Bearings - 10x30x9 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
10.000
mm
+ 0.076 / - 0.000
(Equiv. 0.394 in.)
O.D. (D)
30.000
mm
+ 0.000 / - 0.102
(Equiv. 1.181 in.)
Width (B)
9.000
mm
+ 0.127 / - 0.000
(Equiv. 0.354 in.)
Single Row Ball Bearings - 10x30x9 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Deleted Item. Available while stocks last.
Part Number: S316-6200-2PE (Each)
51 Available Now | Item Discontinued - Up to 51 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.54 AUD
$15.38 AUD $9.54 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

51 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Single Row Ball Bearings - 10x30x9 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
10.000
mm
+ 0.076 / - 0.000
(Equiv. 0.394 in.)
O.D. (D)
30.000
mm
+ 0.000 / - 0.102
(Equiv. 1.181 in.)
Width (B)
9.000
mm
+ 0.127 / - 0.000
(Equiv. 0.354 in.)
Single Row Ball Bearings - 10x30x9 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Deleted Item. Available while stocks last.
Part Number: S316-6200-2PE (Each)
51 Available Now | Item Discontinued - Up to 51 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.54 AUD
$15.38 AUD $9.54 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

51 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Single Row Ball Bearings - 10x35x11 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
10.000
mm
+ 0.076 / - 0.000
(Equiv. 0.394 in.)
O.D. (D)
35.000
mm
+ 0.000 / - 0.102
(Equiv. 1.378 in.)
Width (B)
11.000
mm
+ 0.127 / - 0.000
(Equiv. 0.433 in.)
Single Row Ball Bearings - 10x35x11 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Standard Grease Lubrication   
Part Number: S316-6300-2PE-SRL (Each)
10 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$17.68 AUD
$17.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 10 available can be backordered.
Single Row Ball Bearings - 10x35x11 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
10.000
mm
+ 0.076 / - 0.000
(Equiv. 0.394 in.)
O.D. (D)
35.000
mm
+ 0.000 / - 0.102
(Equiv. 1.378 in.)
Width (B)
11.000
mm
+ 0.127 / - 0.000
(Equiv. 0.433 in.)
Single Row Ball Bearings - 10x35x11 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Standard Grease Lubrication   
Part Number: S316-6300-2PE-SRL (Each)
10 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$17.68 AUD
$17.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. Backorder if more than 10.
Single Row Ball Bearings - 10x35x11 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
10.000
mm
+ 0.076 / - 0.000
(Equiv. 0.394 in.)
O.D. (D)
35.000
mm
+ 0.000 / - 0.102
(Equiv. 1.378 in.)
Width (B)
11.000
mm
+ 0.127 / - 0.000
(Equiv. 0.433 in.)
Single Row Ball Bearings - 10x35x11 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6300-2PE-DRY (Each)
29 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$11.14 AUD
$12.96 AUD $11.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 29 available can be backordered.
Single Row Ball Bearings - 10x35x11 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
10.000
mm
+ 0.076 / - 0.000
(Equiv. 0.394 in.)
O.D. (D)
35.000
mm
+ 0.000 / - 0.102
(Equiv. 1.378 in.)
Width (B)
11.000
mm
+ 0.127 / - 0.000
(Equiv. 0.433 in.)
Single Row Ball Bearings - 10x35x11 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6300-2PE-DRY (Each)
29 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$11.14 AUD
$12.96 AUD $11.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

29 Available Now. Backorder if more than 29.
Single Row Ball Bearings - 12x28x8 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
12.000
mm
+ 0.076 / - 0.000
(Equiv. 0.472 in.)
O.D. (D)
28.000
mm
+ 0.000 / - 0.102
(Equiv. 1.102 in.)
Width (B)
8.000
mm
+ 0.127 / - 0.000
(Equiv. 0.315 in.)
Single Row Ball Bearings - 12x28x8 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6001-2PE (Each)
24 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$10.77 AUD
$10.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 24 available can be backordered.
Single Row Ball Bearings - 12x28x8 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
12.000
mm
+ 0.076 / - 0.000
(Equiv. 0.472 in.)
O.D. (D)
28.000
mm
+ 0.000 / - 0.102
(Equiv. 1.102 in.)
Width (B)
8.000
mm
+ 0.127 / - 0.000
(Equiv. 0.315 in.)
Single Row Ball Bearings - 12x28x8 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6001-2PE (Each)
24 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$10.77 AUD
$10.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

24 Available Now. Backorder if more than 24.
Single Row Ball Bearings - 12x32x10 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
12.000
mm
+ 0.076 / - 0.000
(Equiv. 0.472 in.)
O.D. (D)
32.000
mm
+ 0.000 / - 0.102
(Equiv. 1.26 in.)
Width (B)
10.000
mm
+ 0.127 / - 0.000
(Equiv. 0.394 in.)
Single Row Ball Bearings - 12x32x10 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6201-2PE (Each)
10 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$18.95 AUD
$18.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 10 available can be backordered.
Single Row Ball Bearings - 12x32x10 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
12.000
mm
+ 0.076 / - 0.000
(Equiv. 0.472 in.)
O.D. (D)
32.000
mm
+ 0.000 / - 0.102
(Equiv. 1.26 in.)
Width (B)
10.000
mm
+ 0.127 / - 0.000
(Equiv. 0.394 in.)
Single Row Ball Bearings - 12x32x10 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6201-2PE (Each)
10 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$18.95 AUD
$18.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. Backorder if more than 10.
Single Row Ball Bearings - 15x24x5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
15.000
mm
+ 0.076 / - 0.000
(Equiv. 0.591 in.)
O.D. (D)
24.000
mm
+ 0.000 / - 0.076
(Equiv. 0.945 in.)
Width (B)
5.000
mm
+ 0.127 / - 0.000
(Equiv. 0.197 in.)
Single Row Ball Bearings - 15x24x5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6802-2PE (Each)
10 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$5.86 AUD
$6.84 AUD $5.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 10 available can be backordered.
Single Row Ball Bearings - 15x24x5 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
15.000
mm
+ 0.076 / - 0.000
(Equiv. 0.591 in.)
O.D. (D)
24.000
mm
+ 0.000 / - 0.076
(Equiv. 0.945 in.)
Width (B)
5.000
mm
+ 0.127 / - 0.000
(Equiv. 0.197 in.)
Single Row Ball Bearings - 15x24x5 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6802-2PE (Each)
10 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$5.86 AUD
$6.84 AUD $5.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. Backorder if more than 10.
Single Row Ball Bearings - 15x32x9 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
15.000
mm
+ 0.076 / - 0.000
(Equiv. 0.591 in.)
O.D. (D)
32.000
mm
+ 0.000 / - 0.102
(Equiv. 1.26 in.)
Width (B)
9.000
mm
+ 0.127 / - 0.000
(Equiv. 0.354 in.)
Single Row Ball Bearings - 15x32x9 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6002-2PE (Each)
1 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$9.23 AUD
$10.67 AUD $9.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 1 available can be backordered.
Single Row Ball Bearings - 15x32x9 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
15.000
mm
+ 0.076 / - 0.000
(Equiv. 0.591 in.)
O.D. (D)
32.000
mm
+ 0.000 / - 0.102
(Equiv. 1.26 in.)
Width (B)
9.000
mm
+ 0.127 / - 0.000
(Equiv. 0.354 in.)
Single Row Ball Bearings - 15x32x9 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6002-2PE (Each)
1 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$9.23 AUD
$10.67 AUD $9.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. Backorder if more than 1.
Single Row Ball Bearings - 15x35x11 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
15.000
mm
+ 0.076 / - 0.000
(Equiv. 0.591 in.)
O.D. (D)
35.000
mm
+ 0.000 / - 0.102
(Equiv. 1.378 in.)
Width (B)
11.000
mm
+ 0.127 / - 0.000
(Equiv. 0.433 in.)
Single Row Ball Bearings - 15x35x11 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6202-2PE (Pack of 10)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 19, 2026
$186.05 AUD
$186.05 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Single Row Ball Bearings - 15x35x11 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
15.000
mm
+ 0.076 / - 0.000
(Equiv. 0.591 in.)
O.D. (D)
35.000
mm
+ 0.000 / - 0.102
(Equiv. 1.378 in.)
Width (B)
11.000
mm
+ 0.127 / - 0.000
(Equiv. 0.433 in.)
Single Row Ball Bearings - 15x35x11 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6202-2PE (Pack of 10)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 19, 2026
$186.05 AUD
$186.05 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Single Row Ball Bearings - 17x35x10 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
17.000
mm
+ 0.076 / - 0.000
(Equiv. 0.669 in.)
O.D. (D)
35.000
mm
+ 0.000 / - 0.102
(Equiv. 1.378 in.)
Width (B)
10.000
mm
+ 0.127 / - 0.000
(Equiv. 0.394 in.)
Single Row Ball Bearings - 17x35x10 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6003-2PE (Each)
2 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$9.68 AUD
$11.22 AUD $9.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Single Row Ball Bearings - 17x35x10 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
17.000
mm
+ 0.076 / - 0.000
(Equiv. 0.669 in.)
O.D. (D)
35.000
mm
+ 0.000 / - 0.102
(Equiv. 1.378 in.)
Width (B)
10.000
mm
+ 0.127 / - 0.000
(Equiv. 0.394 in.)
Single Row Ball Bearings - 17x35x10 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6003-2PE (Each)
2 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$9.68 AUD
$11.22 AUD $9.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Single Row Ball Bearings - 17x40x12 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
17.000
mm
+ 0.076 / - 0.000
(Equiv. 0.669 in.)
O.D. (D)
40.000
mm
+ 0.000 / - 0.102
(Equiv. 1.575 in.)
Width (B)
12.000
mm
+ 0.127 / - 0.000
(Equiv. 0.472 in.)
Single Row Ball Bearings - 17x40x12 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6203-2PE (Pack of 10)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 19, 2026
$183.41 AUD
$218.49 AUD $183.41 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Single Row Ball Bearings - 17x40x12 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
17.000
mm
+ 0.076 / - 0.000
(Equiv. 0.669 in.)
O.D. (D)
40.000
mm
+ 0.000 / - 0.102
(Equiv. 1.575 in.)
Width (B)
12.000
mm
+ 0.127 / - 0.000
(Equiv. 0.472 in.)
Single Row Ball Bearings - 17x40x12 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6203-2PE (Pack of 10)
Out of Stock | Backorder Now | Backorder now for delivery around Wed, Aug 19, 2026
$183.41 AUD
$218.49 AUD $183.41 AUD
Priced, Stocked and Sold Per 10 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Single Row Ball Bearings - 20x42x12 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
20.000
mm
+ 0.102 / - 0.000
(Equiv. 0.787 in.)
O.D. (D)
42.000
mm
+ 0.000 / - 0.127
(Equiv. 1.654 in.)
Width (B)
12.000
mm
+ 0.127 / - 0.000
(Equiv. 0.472 in.)
Single Row Ball Bearings - 20x42x12 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6004-2PE (Each)
10 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$25.59 AUD
$25.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 10 available can be backordered.
Single Row Ball Bearings - 20x42x12 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
20.000
mm
+ 0.102 / - 0.000
(Equiv. 0.787 in.)
O.D. (D)
42.000
mm
+ 0.000 / - 0.127
(Equiv. 1.654 in.)
Width (B)
12.000
mm
+ 0.127 / - 0.000
(Equiv. 0.472 in.)
Single Row Ball Bearings - 20x42x12 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6004-2PE (Each)
10 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$25.59 AUD
$25.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

10 Available Now. Backorder if more than 10.
Single Row Ball Bearings - 20x47x14 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
20.000
mm
+ 0.102 / - 0.000
(Equiv. 0.787 in.)
O.D. (D)
47.000
mm
+ 0.000 / - 0.127
(Equiv. 1.85 in.)
Width (B)
14.000
mm
+ 0.127 / - 0.000
(Equiv. 0.551 in.)
Single Row Ball Bearings - 20x47x14 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6204-2PE (Each)
2 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$19.05 AUD
$22.25 AUD $19.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Single Row Ball Bearings - 20x47x14 mm Unflanged - Stainless Steel 316 Similar to A4, 18-10 Bearing
ID (d)
20.000
mm
+ 0.102 / - 0.000
(Equiv. 0.787 in.)
O.D. (D)
47.000
mm
+ 0.000 / - 0.127
(Equiv. 1.85 in.)
Width (B)
14.000
mm
+ 0.127 / - 0.000
(Equiv. 0.551 in.)
Single Row Ball Bearings - 20x47x14 mm - Stainless Steel 316 Similar to A4, 18-10
Material: Stainless Steel 316 (Similar to A4, 18-10)    Precision Grade: Semi-Precision    Closure Type: 2PE    Bearing Type: Radial    Lubricant: Unlubricated   
Part Number: S316-6204-2PE (Each)
2 Available Now | Further orders can be expected around Wed, Aug 19, 2026
$19.05 AUD
$22.25 AUD $19.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.