Bearings - Angular Contact - Single Row Ball - Ceramic Si3N4

Bearings -> Angular Contact -> Single Row Ball -> Ceramic Si3N4

There is only 1 product in the sub-categories of Bearings - Angular Contact - Single Row Ball - Ceramic Si3N4. Browse the Bearings - Angular Contact - Single Row Ball - Ceramic Si3N4 products table.

Category Details

A selection of Ceramic Si3N4 Single Row Ball Angular Contact Bearings. Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

  • These bearings have four points of contact between the balls and the raceways, allowing them to accommodate thrust loads in addition to radial loads.
  • These bearings have raceways in the inner and outer rings that are offset to each other and are inclined at an angle to the bearing axis.
  • Angular contact bearings are used in various applications where precise rotation, high-speed performance, and load-carrying capacity are required. An expanded range may be available on special order. Please enquire.
  • Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics.
  • Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density.
  • Cages of PTFE, Glass Fibre Reinforced Nylon, or PEEK. Can be made from special aviation aluminum on request.
  • Si3N4 (GSN-201) standard material for balls and rings. HRC80 Hardness.
  • High and low- temperature application. Up to 250 Deg C with PTFE Cage, 200 Deg C with PEEK Cage, and 130 Deg C with Nylon Cage. Up to 700 deg C without a cage or seals.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Bearings - Angular Contact - Single Row Ball - Ceramic Si3N4 category on the Small Parts & Bearings online store.
ID (d) O.D. (D) Width (B) Indicative
Image
Angular Contact Bearings - 8x22x7 mm Single Row Ball - Ceramic Silicon Nitride - Full Complement Bearing
ID (d)
8.000
mm

(Equiv. 0.315 in.)
O.D. (D)
22.000
mm

(Equiv. 0.866 in.)
Width (B)
7.000
mm

(Equiv. 0.276 in.)
Angular Contact Bearings - 8x22x7 mm Single Row Ball - Ceramic Silicon Nitride - Full Complement Bearing
Material: Ceramic Silicon Nitride - Full Complement    Precision Grade: Abec 1    Closure Type: Open    Bearing Type: Angular Contact    Lubricant: No Lube   
Part Number: CSN-708-FC-DRY (PK-20)
Out of Stock | Backorder Now | Orders can be expected around Sat, Mar 14, 2026
$5,639.50 AUD
$5,639.50 AUD
Priced, Stocked and Sold Per 20 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
ID (d) O.D. (D) Width (B) Indicative
Image
Angular Contact Bearings - 8x22x7 mm Single Row Ball - Ceramic Silicon Nitride - Full Complement Bearing
ID (d)
8.000
mm

(Equiv. 0.315 in.)
O.D. (D)
22.000
mm

(Equiv. 0.866 in.)
Width (B)
7.000
mm

(Equiv. 0.276 in.)
Angular Contact Bearings - 8x22x7 mm Single Row Ball - Ceramic Silicon Nitride - Full Complement Bearing
Material: Ceramic Silicon Nitride - Full Complement    Precision Grade: Abec 1    Closure Type: Open    Bearing Type: Angular Contact    Lubricant: No Lube   
Part Number: CSN-708-FC-DRY (PK-20)
Out of Stock | Backorder Now | Orders can be expected around Sat, Mar 14, 2026
$5,639.50 AUD
$5,639.50 AUD
Priced, Stocked and Sold Per 20 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.