Balls - Fixture - Tungsten Carbide

2 Products in this selection
  • RC 65-68
  • Ball and shank are concentric within 5 microns (0.0002 in.) TIR.
  • Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
Additional resources:
Balls Master Catalogue PDF
AFBMA Ball Grades
Diameter (A) Shank Diameter (C) Base to Centre (B) Indicative
Image
6.350
mm
+/- 0.0013 		3.167
mm
+/- 0.1270 		14.224
mm
+/- 0.0076 		1071721 | BFX-00635-TC --- Fixture Balls - 6.35 mm x 3.167 mm x 14.224 mm
Material: Tungsten Carbide   
Part Number: BFX-00635-TC Fixture Balls - 6.35 mm x 3.167 mm x 14.224 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$213.68 AUD
$213.68 AUD
Each
Diameter (A) Shank Diameter (C) Base to Centre (B) Indicative
Image
6.350
mm
+/- 0.0013 		3.167
mm
+/- 0.1270 		14.224
mm
+/- 0.0076 		1071721 | BFX-00635-TC --- Fixture Balls - 6.35 mm x 3.167 mm x 14.224 mm
Material: Tungsten Carbide   
Part Number: BFX-00635-TC Fixture Balls - 6.35 mm x 3.167 mm x 14.224 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$213.68 AUD
$213.68 AUD
Each
View the product page first if you are unsure.
9.525
mm
+/- 0.0013 		4.755
mm
+/- 0.1270 		19.050
mm
+/- 0.0076 		1086586 | BFX-00953-TC --- Fixture Balls - 9.525 mm x 4.755 mm x 19.05 mm
Material: Tungsten Carbide   
Part Number: BFX-00953-TC Fixture Balls - 9.525 mm x 4.755 mm x 19.05 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$144.50 AUD
$144.50 AUD
Each
9.525
mm
+/- 0.0013 		4.755
mm
+/- 0.1270 		19.050
mm
+/- 0.0076 		1086586 | BFX-00953-TC --- Fixture Balls - 9.525 mm x 4.755 mm x 19.05 mm
Material: Tungsten Carbide   
Part Number: BFX-00953-TC Fixture Balls - 9.525 mm x 4.755 mm x 19.05 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$144.50 AUD
$144.50 AUD
Each
View the product page first if you are unsure.