Tools - Threading - Hand Taps

145 Products in this selection

This is a combined category of products from Hand Taps Threading Tools. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Thread Size Pitch in mm / Threads Per Inch Type Square Shank Dia. Indicative
Image
3/8-16 UNC (9.53mm)
 1.588 mm / 16 TPI
 Intermediate
 7.26
mm 		1086541 | TPC-095C-I-H --- Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Intermediate
Material: High Speed Carbon Steel - Ground Thread    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - High Speed
Part Number: TPC-095C-I-H Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Intermediate
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
Thread Size Pitch in mm / Threads Per Inch Type Square Shank Dia. Indicative
Image
3/8-16 UNC (9.53mm)
 1.588 mm / 16 TPI
 Intermediate
 7.26
mm 		1086541 | TPC-095C-I-H --- Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Intermediate
Material: High Speed Carbon Steel - Ground Thread    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - High Speed
Part Number: TPC-095C-I-H Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Intermediate
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$8.25 AUD $5.00 AUD
Each
3/8-16 UNC (9.53mm)
 1.588 mm / 16 TPI
 Bottoming
 1089226 | TPC-095C-P --- Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-P Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Bottoming
3 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-16 UNC (9.53mm)
 1.588 mm / 16 TPI
 Bottoming
 1089226 | TPC-095C-P --- Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-P Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Bottoming
3 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-16 UNC (9.53mm)
 1.588 mm / 16 TPI
 Intermediate
 1089227 | TPC-095C-I --- Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-I Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Intermediate
5 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-16 UNC (9.53mm)
 1.588 mm / 16 TPI
 Intermediate
 1089227 | TPC-095C-I --- Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-I Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Intermediate
5 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-16 UNC (9.53mm)
 1.588 mm / 16 TPI
 Taper
 1089228 | TPC-095C-T --- Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Taper
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-T Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Taper
5 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-16 UNC (9.53mm)
 1.588 mm / 16 TPI
 Taper
 1089228 | TPC-095C-T --- Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Taper
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095C-T Threading Tools - 3/8-16 UNC (9.53mm) 1.588 mm / 16 TPI Taper
5 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-24 UNF (9.53mm)
 1.058 mm / 24 TPI
 Bottoming
 1089233 | TPC-095F-P --- Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-P Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Bottoming
4 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-24 UNF (9.53mm)
 1.058 mm / 24 TPI
 Bottoming
 1089233 | TPC-095F-P --- Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-P Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Bottoming
4 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-24 UNF (9.53mm)
 1.058 mm / 24 TPI
 Intermediate
 1089234 | TPC-095F-I --- Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-I Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Intermediate
4 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-24 UNF (9.53mm)
 1.058 mm / 24 TPI
 Intermediate
 1089234 | TPC-095F-I --- Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-I Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Intermediate
4 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-24 UNF (9.53mm)
 1.058 mm / 24 TPI
 Taper
 1089235 | TPC-095F-T --- Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Taper
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-T Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Taper
4 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
3/8-24 UNF (9.53mm)
 1.058 mm / 24 TPI
 Taper
 1089235 | TPC-095F-T --- Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Taper
Material: Carbon Steel    Drill Size Range: 8.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-095F-T Threading Tools - 3/8-24 UNF (9.53mm) 1.058 mm / 24 TPI Taper
4 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M10 (10x1.5mm)
 1.500 mm / 16.93 TPI
 Bottoming
 8.00
mm 		1090711 | TPC-100M-P --- Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 8.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-P Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Bottoming
2 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M10 (10x1.5mm)
 1.500 mm / 16.93 TPI
 Bottoming
 8.00
mm 		1090711 | TPC-100M-P --- Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 8.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-P Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Bottoming
2 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M10 (10x1.5mm)
 1.500 mm / 16.93 TPI
 Intermediate
 8.00
mm 		1090717 | TPC-100M-I --- Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 8.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-I Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Intermediate
4 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M10 (10x1.5mm)
 1.500 mm / 16.93 TPI
 Intermediate
 8.00
mm 		1090717 | TPC-100M-I --- Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 8.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-I Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Intermediate
4 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M10 (10x1.5mm)
 1.500 mm / 16.93 TPI
 Taper
 8.00
mm 		1090719 | TPC-100M-T --- Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Taper
Material: Carbon Steel    Drill Size Range: 8.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-T Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Taper
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.00 AUD
$9.90 AUD $6.00 AUD
Each
M10 (10x1.5mm)
 1.500 mm / 16.93 TPI
 Taper
 8.00
mm 		1090719 | TPC-100M-T --- Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Taper
Material: Carbon Steel    Drill Size Range: 8.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-100M-T Threading Tools - M10 (10x1.5mm) 1.500 mm / 16.93 TPI Taper
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.00 AUD
$9.90 AUD $6.00 AUD
Each
M11x1.5
 1.500 mm / 16.93 TPI
 Bottoming
 1095654 | TPC-110M-P --- Threading Tools - M11x1.5 1.500 mm / 16.93 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 9.40 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-110M-P Threading Tools - M11x1.5 1.500 mm / 16.93 TPI Bottoming
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$11.55 AUD $7.00 AUD
Each
M11x1.5
 1.500 mm / 16.93 TPI
 Bottoming
 1095654 | TPC-110M-P --- Threading Tools - M11x1.5 1.500 mm / 16.93 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 9.40 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-110M-P Threading Tools - M11x1.5 1.500 mm / 16.93 TPI Bottoming
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$11.55 AUD $7.00 AUD
Each
M12 (12x1.75mm)
 1.750 mm / 14.51 TPI
 Bottoming
 7.10
mm 		1097600 | TPC-120M-P --- Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 10.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-P Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Bottoming
2 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M12 (12x1.75mm)
 1.750 mm / 14.51 TPI
 Bottoming
 7.10
mm 		1097600 | TPC-120M-P --- Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 10.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-P Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Bottoming
2 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M12 (12x1.75mm)
 1.750 mm / 14.51 TPI
 Intermediate
 7.10
mm 		1097606 | TPC-120M-I --- Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 10.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-I Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Intermediate
3 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M12 (12x1.75mm)
 1.750 mm / 14.51 TPI
 Intermediate
 7.10
mm 		1097606 | TPC-120M-I --- Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 10.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-I Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Intermediate
3 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M12 (12x1.75mm)
 1.750 mm / 14.51 TPI
 Taper
 7.10
mm 		1097608 | TPC-120M-T (2 Pcs) --- Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Taper
Material: Carbon Steel    Drill Size Range: 10.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-T (2 Pcs) Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Taper
1 pack (2 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$14.00 AUD
$23.10 AUD $14.00 AUD
Per 2
M12 (12x1.75mm)
 1.750 mm / 14.51 TPI
 Taper
 7.10
mm 		1097608 | TPC-120M-T (2 Pcs) --- Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Taper
Material: Carbon Steel    Drill Size Range: 10.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-120M-T (2 Pcs) Threading Tools - M12 (12x1.75mm) 1.750 mm / 14.51 TPI Taper
1 pack (2 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$14.00 AUD
$23.10 AUD $14.00 AUD
Per 2
1/2-13 UNC (12.7mm)
 1.954 mm / 13 TPI
 Bottoming
 Maschi a mano 1/2-13 UNC - 12,7 mm - Fondo in acciaio al carbonio - Bordo (confezione da 1)
Material: Carbon Steel    Drill Size Range: 10.80 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: Maschi a mano 1/2-13 UNC - 12,7 mm - Fondo in acciaio al carbonio - Bordo (confezione da 1) Maschi a mano 1/2-13 UNC - 12,7 mm - Fondo in acciaio al carbonio - Bordo (confezione da 1) / Tools
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$11.55 AUD $7.00 AUD
Each
1/2-13 UNC (12.7mm)
 1.954 mm / 13 TPI
 Bottoming
 Maschi a mano 1/2-13 UNC - 12,7 mm - Fondo in acciaio al carbonio - Bordo (confezione da 1)
Material: Carbon Steel    Drill Size Range: 10.80 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: Maschi a mano 1/2-13 UNC - 12,7 mm - Fondo in acciaio al carbonio - Bordo (confezione da 1) Maschi a mano 1/2-13 UNC - 12,7 mm - Fondo in acciaio al carbonio - Bordo (confezione da 1) / Tools
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$11.55 AUD $7.00 AUD
Each
1/2-13 UNC (12.7mm)
 1.954 mm / 13 TPI
 Taper
 Maschio a mano 1/2-13 UNC - 12,7 mm - Acciaio al carbonio conico - Bordo (confezione da 1)
Material: Carbon Steel    Drill Size Range: 10.80 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: Maschio a mano 1/2-13 UNC - 12,7 mm - Acciaio al carbonio conico - Bordo (confezione da 1) Maschio a mano 1/2-13 UNC - 12,7 mm - Acciaio al carbonio conico - Bordo (confezione da 1) / Tools
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$11.55 AUD $7.00 AUD
Each
1/2-13 UNC (12.7mm)
 1.954 mm / 13 TPI
 Taper
 Maschio a mano 1/2-13 UNC - 12,7 mm - Acciaio al carbonio conico - Bordo (confezione da 1)
Material: Carbon Steel    Drill Size Range: 10.80 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: Maschio a mano 1/2-13 UNC - 12,7 mm - Acciaio al carbonio conico - Bordo (confezione da 1) Maschio a mano 1/2-13 UNC - 12,7 mm - Acciaio al carbonio conico - Bordo (confezione da 1) / Tools
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$11.55 AUD $7.00 AUD
Each
M14 (14x2mm)
 2.000 mm / 12.7 TPI
 Bottoming
 9.00
mm 		1106533 | TPC-140M-P (2 Pcs) --- Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 12.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-P (2 Pcs) Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Bottoming
1 pack (2 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$33.00 AUD $20.00 AUD
Per 2
M14 (14x2mm)
 2.000 mm / 12.7 TPI
 Bottoming
 9.00
mm 		1106533 | TPC-140M-P (2 Pcs) --- Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 12.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-P (2 Pcs) Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Bottoming
1 pack (2 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$33.00 AUD $20.00 AUD
Per 2
M14 (14x2mm)
 2.000 mm / 12.7 TPI
 Intermediate
 9.00
mm 		1106536 | TPC-140M-I --- Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 12.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-I Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Intermediate
3 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M14 (14x2mm)
 2.000 mm / 12.7 TPI
 Intermediate
 9.00
mm 		1106536 | TPC-140M-I --- Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 12.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-I Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Intermediate
3 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M14 (14x2mm)
 2.000 mm / 12.7 TPI
 Taper
 9.00
mm 		1106538 | TPC-140M-T (2 Pcs) --- Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Taper
Material: Carbon Steel    Drill Size Range: 12.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-T (2 Pcs) Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Taper
1 pack (2 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$33.00 AUD $20.00 AUD
Per 2
M14 (14x2mm)
 2.000 mm / 12.7 TPI
 Taper
 9.00
mm 		1106538 | TPC-140M-T (2 Pcs) --- Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Taper
Material: Carbon Steel    Drill Size Range: 12.00 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-140M-T (2 Pcs) Threading Tools - M14 (14x2mm) 2.000 mm / 12.7 TPI Taper
1 pack (2 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$20.00 AUD
$33.00 AUD $20.00 AUD
Per 2
9/16-12 UNC (14.29mm)
 2.117 mm / 12 TPI
 Intermediate
 Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio intermedio - Bordo (confezione da 2)
Material: Carbon Steel    Drill Size Range: 12.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio intermedio - Bordo (confezione da 2) Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio intermedio - Bordo (confezione da 2) / Tools
2 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
9/16-12 UNC (14.29mm)
 2.117 mm / 12 TPI
 Intermediate
 Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio intermedio - Bordo (confezione da 2)
Material: Carbon Steel    Drill Size Range: 12.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio intermedio - Bordo (confezione da 2) Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio intermedio - Bordo (confezione da 2) / Tools
2 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
9/16-12 UNC (14.29mm)
 2.117 mm / 12 TPI
 Taper
 Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio conico - Bordo (confezione da 2)
Material: Carbon Steel    Drill Size Range: 12.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio conico - Bordo (confezione da 2) Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio conico - Bordo (confezione da 2) / Tools
2 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
9/16-12 UNC (14.29mm)
 2.117 mm / 12 TPI
 Taper
 Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio conico - Bordo (confezione da 2)
Material: Carbon Steel    Drill Size Range: 12.20 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio conico - Bordo (confezione da 2) Maschio a mano 9/16-12 UNC - 14,288 mm - Acciaio al carbonio conico - Bordo (confezione da 2) / Tools
2 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M16 Extra Fine (16x1.5mm)
 1.500 mm / 16.93 TPI
 Bottoming
 10.00
mm 		1113621 | TPC-160M-150-P (2 Pcs) --- Threading Tools - M16 Extra Fine (16x1.5mm) 1.500 mm / 16.93 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 14.60 - 14.90 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-160M-150-P (2 Pcs) Threading Tools - M16 Extra Fine (16x1.5mm) 1.500 mm / 16.93 TPI Bottoming
1 pack (2 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$24.00 AUD
$39.60 AUD $24.00 AUD
Per 2
M16 Extra Fine (16x1.5mm)
 1.500 mm / 16.93 TPI
 Bottoming
 10.00
mm 		1113621 | TPC-160M-150-P (2 Pcs) --- Threading Tools - M16 Extra Fine (16x1.5mm) 1.500 mm / 16.93 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 14.60 - 14.90 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-160M-150-P (2 Pcs) Threading Tools - M16 Extra Fine (16x1.5mm) 1.500 mm / 16.93 TPI Bottoming
1 pack (2 pcs) Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$24.00 AUD
$39.60 AUD $24.00 AUD
Per 2
M16 (16x2mm)
 2.000 mm / 12.7 TPI
 Intermediate
 10.00
mm 		1113807 | TPC-160M-I --- Threading Tools - M16 (16x2mm) 2.000 mm / 12.7 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 14.00 - 14.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-160M-I Threading Tools - M16 (16x2mm) 2.000 mm / 12.7 TPI Intermediate
3 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M16 (16x2mm)
 2.000 mm / 12.7 TPI
 Intermediate
 10.00
mm 		1113807 | TPC-160M-I --- Threading Tools - M16 (16x2mm) 2.000 mm / 12.7 TPI Intermediate
Material: Carbon Steel    Drill Size Range: 14.00 - 14.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-160M-I Threading Tools - M16 (16x2mm) 2.000 mm / 12.7 TPI Intermediate
3 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$19.80 AUD $12.00 AUD
Each
M18 (18x2.5mm)
 2.500 mm / 10.16 TPI
 Bottoming
 11.20
mm 		1118018 | TPC-180M-P --- Threading Tools - M18 (18x2.5mm) 2.500 mm / 10.16 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 15.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-180M-P Threading Tools - M18 (18x2.5mm) 2.500 mm / 10.16 TPI Bottoming
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$15.00 AUD
$24.75 AUD $15.00 AUD
Each
M18 (18x2.5mm)
 2.500 mm / 10.16 TPI
 Bottoming
 11.20
mm 		1118018 | TPC-180M-P --- Threading Tools - M18 (18x2.5mm) 2.500 mm / 10.16 TPI Bottoming
Material: Carbon Steel    Drill Size Range: 15.50 mm   
Category: Tools - Threading - Hand Taps - Carbon Steel
Part Number: TPC-180M-P Threading Tools - M18 (18x2.5mm) 2.500 mm / 10.16 TPI Bottoming
1 Available | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$15.00 AUD
$24.75 AUD $15.00 AUD
Each