Pins - Hammer Drive

43 Products in this selection

This is a combined category of products from Hammer Drive Pins. Use the filters in the table below, or the category tree to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.

Additional resources:
Master Pins Catalogue PDF
Min Hole Dia (d1) Approx. Length (L) Max Hole Dia. Approx Pin Diameter (d2) Max Head Diameter (d3) Max Head Thickness (T) Indicative
Image
1.24
mm 		3.2
mm 		1.32
mm 		1.52
mm 		2.51
mm 		0.86
mm 		1038726 | HDP012-03R-S4 (100 Pcs) --- Pins - 1.24 mm x 3.2 mm x 1.32 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP012-03R-S4 (100 Pcs) Pins - 1.24 mm x 3.2 mm x 1.32 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Tue, Jan 28, 2025
$123.95 AUD
$123.95 AUD
Per 100
Min Hole Dia (d1) Approx. Length (L) Max Hole Dia. Approx Pin Diameter (d2) Indicative
Image
1.24
mm 		3.2
mm 		1.32
mm 		1.52
mm 		1038726 | HDP012-03R-S4 (100 Pcs) --- Pins - 1.24 mm x 3.2 mm x 1.32 mm
Material: Stainless    Max Head Diameter (d3): 2.51 mm    Max Head Thickness (T): 0.86 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP012-03R-S4 (100 Pcs) Pins - 1.24 mm x 3.2 mm x 1.32 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Tue, Jan 28, 2025
$123.95 AUD
$123.95 AUD
Per 100
1.24
mm 		4.8
mm 		1.32
mm 		1.52
mm 		2.51
mm 		0.86
mm 		1038727 | HDP012-05R-S4 (10 Pcs) --- Pins - 1.24 mm x 4.8 mm x 1.32 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP012-05R-S4 (10 Pcs) Pins - 1.24 mm x 4.8 mm x 1.32 mm
43 units (430 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$11.05 AUD
$11.05 AUD
Per 10
1.24
mm 		4.8
mm 		1.32
mm 		1.52
mm 		1038727 | HDP012-05R-S4 (10 Pcs) --- Pins - 1.24 mm x 4.8 mm x 1.32 mm
Material: Stainless    Max Head Diameter (d3): 2.51 mm    Max Head Thickness (T): 0.86 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP012-05R-S4 (10 Pcs) Pins - 1.24 mm x 4.8 mm x 1.32 mm
43 units (430 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$11.05 AUD
$11.05 AUD
Per 10
1.40
mm 		5.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		5.0
mm 		1.46
mm 		1.63
mm 		Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 5 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		6.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		6.0
mm 		1.46
mm 		1.63
mm 		Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 6 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.40
mm 		8.0
mm 		1.46
mm 		1.63
mm 		2.60
mm 		0.55
mm 		Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
239 units (1195 pcs) Available
| Backorders for more can be expected around Mon, Feb 10, 2025
$3.41 AUD
$3.41 AUD
Per 5
1.40
mm 		8.0
mm 		1.46
mm 		1.63
mm 		Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 2.60 mm    Max Head Thickness (T): 0.55 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,4 x 8 x 1,46 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
239 units (1195 pcs) Available
| | Backorders for more can be expected around Mon, Feb 10, 2025
$3.41 AUD
$3.41 AUD
Per 5
1.52
mm 		6.3
mm 		1.60
mm 		1.70
mm 		2.51
mm 		0.86
mm 		Perno di azionamento del martello 1,52 x 6,3 mm - Acciaio inossidabile - MBA (confezione da 5)
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: Perno di azionamento del martello 1,52 x 6,3 mm - Acciaio inossidabile - MBA (confezione da 5) Perno di azionamento del martello 1,52 x 6,3 mm - Acciaio inossidabile - MBA (confezione da 5) / Pins
122 units (610 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$5.95 AUD
$5.95 AUD
Per 5
1.52
mm 		6.3
mm 		1.60
mm 		1.70
mm 		Perno di azionamento del martello 1,52 x 6,3 mm - Acciaio inossidabile - MBA (confezione da 5)
Material: Stainless    Max Head Diameter (d3): 2.51 mm    Max Head Thickness (T): 0.86 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: Perno di azionamento del martello 1,52 x 6,3 mm - Acciaio inossidabile - MBA (confezione da 5) Perno di azionamento del martello 1,52 x 6,3 mm - Acciaio inossidabile - MBA (confezione da 5) / Pins
122 units (610 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$5.95 AUD
$5.95 AUD
Per 5
1.52
mm 		9.5
mm 		1.60
mm 		1.70
mm 		2.51
mm 		0.86
mm 		Perno di azionamento del martello 1,52 x 9,5 mm - Acciaio inossidabile - MBA (confezione da 20)
Material: Stainless    Nom. Pilot Length (P): 1.6 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: Perno di azionamento del martello 1,52 x 9,5 mm - Acciaio inossidabile - MBA (confezione da 20) Perno di azionamento del martello 1,52 x 9,5 mm - Acciaio inossidabile - MBA (confezione da 20) / Pins
8 units (160 pcs) Available
| Backorders for more can be expected around Tue, Jan 07, 2025
$12.50 AUD
$12.50 AUD
Per 20
1.52
mm 		9.5
mm 		1.60
mm 		1.70
mm 		Perno di azionamento del martello 1,52 x 9,5 mm - Acciaio inossidabile - MBA (confezione da 20)
Material: Stainless    Max Head Diameter (d3): 2.51 mm    Max Head Thickness (T): 0.86 mm    Nom. Pilot Length (P): 1.6 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: Perno di azionamento del martello 1,52 x 9,5 mm - Acciaio inossidabile - MBA (confezione da 20) Perno di azionamento del martello 1,52 x 9,5 mm - Acciaio inossidabile - MBA (confezione da 20) / Pins
8 units (160 pcs) Available
| | Backorders for more can be expected around Tue, Jan 07, 2025
$12.50 AUD
$12.50 AUD
Per 20
1.60
mm 		5.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
40 units (800 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		5.0
mm 		1.66
mm 		1.83
mm 		Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,60 x 5 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
40 units (800 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		6.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50) Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50) / Pins
40 units (4000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.19 AUD
$9.29 AUD $6.19 AUD
Per 100
1.60
mm 		6.0
mm 		1.66
mm 		1.83
mm 		Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50)
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50) Perno di azionamento del martello 1,60 x 6 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 50) / Pins
40 units (4000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.19 AUD
$9.29 AUD $6.19 AUD
Per 100
1.60
mm 		8.0
mm 		1.66
mm 		1.83
mm 		3.00
mm 		0.65
mm 		Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
54 units (1080 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
1.60
mm 		8.0
mm 		1.66
mm 		1.83
mm 		Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5)
Material: Carbon Steel    Max Head Diameter (d3): 3.00 mm    Max Head Thickness (T): 0.65 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) Perno di azionamento del martello 1,60 x 8 x 1,66 mm - Acciaio al carbonio - MBA (confezione da 5) / Pins
54 units (1080 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		6.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041011 | HDP020-06F (5 Pcs) --- Pins - 2 mm x 6 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP020-06F (5 Pcs) Pins - 2 mm x 6 mm x 2.06 mm
3160 units (15800 pcs) Available
| Backorders for more can be expected around Mon, Feb 10, 2025
$14.14 AUD
$14.14 AUD
Per 5
2.00
mm 		6.0
mm 		2.06
mm 		2.30
mm 		1041011 | HDP020-06F (5 Pcs) --- Pins - 2 mm x 6 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP020-06F (5 Pcs) Pins - 2 mm x 6 mm x 2.06 mm
3160 units (15800 pcs) Available
| | Backorders for more can be expected around Mon, Feb 10, 2025
$14.14 AUD
$14.14 AUD
Per 5
2.00
mm 		8.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041202 | HDP020-08F (20 Pcs) --- Pins - 2 mm x 8 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP020-08F (20 Pcs) Pins - 2 mm x 8 mm x 2.06 mm
38 units (760 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		8.0
mm 		2.06
mm 		2.30
mm 		1041202 | HDP020-08F (20 Pcs) --- Pins - 2 mm x 8 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP020-08F (20 Pcs) Pins - 2 mm x 8 mm x 2.06 mm
38 units (760 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.34 AUD
$9.50 AUD $6.34 AUD
Per 20
2.00
mm 		10.0
mm 		2.06
mm 		2.30
mm 		3.70
mm 		0.75
mm 		1041270 | HDP020-10F (20 Pcs) --- Pins - 2 mm x 10 mm x 2.06 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP020-10F (20 Pcs) Pins - 2 mm x 10 mm x 2.06 mm
49 units (980 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.41 AUD
$9.61 AUD $6.41 AUD
Per 20
2.00
mm 		10.0
mm 		2.06
mm 		2.30
mm 		1041270 | HDP020-10F (20 Pcs) --- Pins - 2 mm x 10 mm x 2.06 mm
Material: Carbon Steel    Max Head Diameter (d3): 3.70 mm    Max Head Thickness (T): 0.75 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP020-10F (20 Pcs) Pins - 2 mm x 10 mm x 2.06 mm
49 units (980 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.41 AUD
$9.61 AUD $6.41 AUD
Per 20
2.10
mm 		3.2
mm 		2.18
mm 		2.54
mm 		4.10
mm 		1.75
mm 		1042289 | HDP021-03R-S4 (5 Pcs) --- Pins - 2.1 mm x 3.2 mm x 2.18 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP021-03R-S4 (5 Pcs) Pins - 2.1 mm x 3.2 mm x 2.18 mm
19 units (95 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$4.41 AUD
$4.41 AUD
Per 5
2.10
mm 		3.2
mm 		2.18
mm 		2.54
mm 		1042289 | HDP021-03R-S4 (5 Pcs) --- Pins - 2.1 mm x 3.2 mm x 2.18 mm
Material: Stainless    Max Head Diameter (d3): 4.10 mm    Max Head Thickness (T): 1.75 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP021-03R-S4 (5 Pcs) Pins - 2.1 mm x 3.2 mm x 2.18 mm
19 units (95 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$4.41 AUD
$4.41 AUD
Per 5
2.10
mm 		4.8
mm 		2.18
mm 		2.54
mm 		4.10
mm 		1.75
mm 		1042290 | HDP021-05R-S4 (5 Pcs) --- Pins - 2.1 mm x 4.8 mm x 2.18 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP021-05R-S4 (5 Pcs) Pins - 2.1 mm x 4.8 mm x 2.18 mm
264 units (1320 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$5.59 AUD
$5.59 AUD
Per 5
2.10
mm 		4.8
mm 		2.18
mm 		2.54
mm 		1042290 | HDP021-05R-S4 (5 Pcs) --- Pins - 2.1 mm x 4.8 mm x 2.18 mm
Material: Stainless    Max Head Diameter (d3): 4.10 mm    Max Head Thickness (T): 1.75 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP021-05R-S4 (5 Pcs) Pins - 2.1 mm x 4.8 mm x 2.18 mm
264 units (1320 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$5.59 AUD
$5.59 AUD
Per 5
2.10
mm 		6.3
mm 		2.18
mm 		2.54
mm 		4.10
mm 		1.75
mm 		1042291 | HDP021-06R-S4 (5 Pcs) --- Pins - 2.1 mm x 6.3 mm x 2.18 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP021-06R-S4 (5 Pcs) Pins - 2.1 mm x 6.3 mm x 2.18 mm
236 units (1180 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$5.95 AUD
$5.95 AUD
Per 5
2.10
mm 		6.3
mm 		2.18
mm 		2.54
mm 		1042291 | HDP021-06R-S4 (5 Pcs) --- Pins - 2.1 mm x 6.3 mm x 2.18 mm
Material: Stainless    Max Head Diameter (d3): 4.10 mm    Max Head Thickness (T): 1.75 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP021-06R-S4 (5 Pcs) Pins - 2.1 mm x 6.3 mm x 2.18 mm
236 units (1180 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$5.95 AUD
$5.95 AUD
Per 5
2.10
mm 		7.9
mm 		2.18
mm 		2.54
mm 		4.10
mm 		1.75
mm 		1042292 | HDP021-08R-S4 (100 Pcs) --- Pins - 2.1 mm x 7.9 mm x 2.18 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP021-08R-S4 (100 Pcs) Pins - 2.1 mm x 7.9 mm x 2.18 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Tue, Jan 28, 2025
$123.95 AUD
$123.95 AUD
Per 100
2.10
mm 		7.9
mm 		2.18
mm 		2.54
mm 		1042292 | HDP021-08R-S4 (100 Pcs) --- Pins - 2.1 mm x 7.9 mm x 2.18 mm
Material: Stainless    Max Head Diameter (d3): 4.10 mm    Max Head Thickness (T): 1.75 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP021-08R-S4 (100 Pcs) Pins - 2.1 mm x 7.9 mm x 2.18 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Tue, Jan 28, 2025
$123.95 AUD
$123.95 AUD
Per 100
2.44
mm 		4.8
mm 		2.64
mm 		2.95
mm 		5.36
mm 		2.18
mm 		1043388 | HDP024-05R-S4 (5 Pcs) --- Pins - 2.44 mm x 4.8 mm x 2.64 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP024-05R-S4 (5 Pcs) Pins - 2.44 mm x 4.8 mm x 2.64 mm
99 units (495 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$5.59 AUD
$5.59 AUD
Per 5
2.44
mm 		4.8
mm 		2.64
mm 		2.95
mm 		1043388 | HDP024-05R-S4 (5 Pcs) --- Pins - 2.44 mm x 4.8 mm x 2.64 mm
Material: Stainless    Max Head Diameter (d3): 5.36 mm    Max Head Thickness (T): 2.18 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP024-05R-S4 (5 Pcs) Pins - 2.44 mm x 4.8 mm x 2.64 mm
99 units (495 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$5.59 AUD
$5.59 AUD
Per 5
2.44
mm 		6.3
mm 		2.64
mm 		2.95
mm 		5.36
mm 		2.18
mm 		1043389 | HDP024-06R-S4 (5 Pcs) --- Pins - 2.44 mm x 6.3 mm x 2.64 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP024-06R-S4 (5 Pcs) Pins - 2.44 mm x 6.3 mm x 2.64 mm
131 units (655 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$5.59 AUD
$5.59 AUD
Per 5
2.44
mm 		6.3
mm 		2.64
mm 		2.95
mm 		1043389 | HDP024-06R-S4 (5 Pcs) --- Pins - 2.44 mm x 6.3 mm x 2.64 mm
Material: Stainless    Max Head Diameter (d3): 5.36 mm    Max Head Thickness (T): 2.18 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP024-06R-S4 (5 Pcs) Pins - 2.44 mm x 6.3 mm x 2.64 mm
131 units (655 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$5.59 AUD
$5.59 AUD
Per 5
2.44
mm 		7.9
mm 		2.64
mm 		2.95
mm 		5.36
mm 		2.18
mm 		1043390 | HDP024-08R-S4 (10 Pcs) --- Pins - 2.44 mm x 7.9 mm x 2.64 mm
Material: Stainless    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP024-08R-S4 (10 Pcs) Pins - 2.44 mm x 7.9 mm x 2.64 mm
148 units (1480 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$11.05 AUD
$11.05 AUD
Per 10
2.44
mm 		7.9
mm 		2.64
mm 		2.95
mm 		1043390 | HDP024-08R-S4 (10 Pcs) --- Pins - 2.44 mm x 7.9 mm x 2.64 mm
Material: Stainless    Max Head Diameter (d3): 5.36 mm    Max Head Thickness (T): 2.18 mm    Nom. Pilot Length (P): 1.2 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP024-08R-S4 (10 Pcs) Pins - 2.44 mm x 7.9 mm x 2.64 mm
148 units (1480 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$11.05 AUD
$11.05 AUD
Per 10
2.44
mm 		9.5
mm 		2.64
mm 		2.95
mm 		5.36
mm 		2.18
mm 		1043391 | HDP024-09R-S4 (10 Pcs) --- Pins - 2.44 mm x 9.5 mm x 2.64 mm
Material: Stainless    Nom. Pilot Length (P): 1.6 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP024-09R-S4 (10 Pcs) Pins - 2.44 mm x 9.5 mm x 2.64 mm
40 units (400 pcs) Available
| Backorders for more can be expected around Thu, Jan 30, 2025
$11.77 AUD
$11.77 AUD
Per 10
2.44
mm 		9.5
mm 		2.64
mm 		2.95
mm 		1043391 | HDP024-09R-S4 (10 Pcs) --- Pins - 2.44 mm x 9.5 mm x 2.64 mm
Material: Stainless    Max Head Diameter (d3): 5.36 mm    Max Head Thickness (T): 2.18 mm    Nom. Pilot Length (P): 1.6 mm   
Category: Pins - Hammer Drive - Round Head Stainless Steel
Part Number: HDP024-09R-S4 (10 Pcs) Pins - 2.44 mm x 9.5 mm x 2.64 mm
40 units (400 pcs) Available
| | Backorders for more can be expected around Thu, Jan 30, 2025
$11.77 AUD
$11.77 AUD
Per 10
2.50
mm 		6.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043587 | HDP025-06F (20 Pcs) --- Pins - 2.5 mm x 6 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP025-06F (20 Pcs) Pins - 2.5 mm x 6 mm x 2.56 mm
425 units (8500 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.09 AUD
$10.64 AUD $7.09 AUD
Per 20
2.50
mm 		6.0
mm 		2.56
mm 		2.80
mm 		1043587 | HDP025-06F (20 Pcs) --- Pins - 2.5 mm x 6 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP025-06F (20 Pcs) Pins - 2.5 mm x 6 mm x 2.56 mm
425 units (8500 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$7.09 AUD
$10.64 AUD $7.09 AUD
Per 20
2.50
mm 		8.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043725 | HDP025-08F (5 Pcs) --- Pins - 2.5 mm x 8 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP025-08F (5 Pcs) Pins - 2.5 mm x 8 mm x 2.56 mm
1202 units (6010 pcs) Available
| Backorders for more can be expected around Mon, Feb 10, 2025
$3.68 AUD
$3.68 AUD
Per 5
2.50
mm 		8.0
mm 		2.56
mm 		2.80
mm 		1043725 | HDP025-08F (5 Pcs) --- Pins - 2.5 mm x 8 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP025-08F (5 Pcs) Pins - 2.5 mm x 8 mm x 2.56 mm
1202 units (6010 pcs) Available
| | Backorders for more can be expected around Mon, Feb 10, 2025
$3.68 AUD
$3.68 AUD
Per 5
2.50
mm 		10.0
mm 		2.56
mm 		2.80
mm 		4.60
mm 		0.90
mm 		1043826 | HDP025-10F (20 Pcs) --- Pins - 2.5 mm x 10 mm x 2.56 mm
Material: Carbon Steel    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP025-10F (20 Pcs) Pins - 2.5 mm x 10 mm x 2.56 mm
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.49 AUD
$9.74 AUD $6.49 AUD
Per 20
2.50
mm 		10.0
mm 		2.56
mm 		2.80
mm 		1043826 | HDP025-10F (20 Pcs) --- Pins - 2.5 mm x 10 mm x 2.56 mm
Material: Carbon Steel    Max Head Diameter (d3): 4.60 mm    Max Head Thickness (T): 0.90 mm    Nom. Pilot Length (P): 1.0 mm   
Category: Pins - Hammer Drive - Flat Head
Part Number: HDP025-10F (20 Pcs) Pins - 2.5 mm x 10 mm x 2.56 mm
50 units (1000 pcs) Available
Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity |
$6.49 AUD
$9.74 AUD $6.49 AUD
Per 20