Pins - Dowel

1083 Products in this selection
This is a combined category of Dowel Pins.
  • Also known as parallel pins
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances

Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Pins - Dowel
Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
3.000
mm
+ 0.004 / + 0.012 		50.00
mm
+/- 0.600 		50.00
mm
+/ - 0.600 		1 (Chamfer One End)
Spina di centraggio 3 x 50 mm - Estremità smussata Acciaio 100Cr6 - DIN6325 / ISO 8734 - NoCor (confezione da 10)
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3 x 50 mm - Estremità smussata Acciaio 100Cr6 - DIN6325 / ISO 8734 - NoCor (confezione da 10) Spina di centraggio 3 x 50 mm - Estremità smussata Acciaio 100Cr6 - DIN6325 / ISO 8734 - NoCor (confezione da 10) / Pins
10 units (100 pcs) Available Immediately | Further orders can be expected around Thu, Apr 10, 2025
$7.77 AUD
$7.77 AUD
Per 10
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
3.000
mm
+ 0.004 / + 0.012 		50.00
mm
+/- 0.600 		50.00
mm
+/ - 0.600 		Spina di centraggio 3 x 50 mm - Estremità smussata Acciaio 100Cr6 - DIN6325 / ISO 8734 - NoCor (confezione da 10)
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3 x 50 mm - Estremità smussata Acciaio 100Cr6 - DIN6325 / ISO 8734 - NoCor (confezione da 10) Spina di centraggio 3 x 50 mm - Estremità smussata Acciaio 100Cr6 - DIN6325 / ISO 8734 - NoCor (confezione da 10) / Pins
10 units (100 pcs) Available Immediately | Further orders can be expected around Thu, Apr 10, 2025
$7.77 AUD
$7.77 AUD
Per 10
View the product page first if you are unsure.
3.000
mm
+ 0.004 / + 0.012 		55.00
mm
+/- 0.600 		55.00
mm
+/ - 0.600 		1 (Chamfer One End)
1048112 | DP030-055-CH-1 --- Dowel Pins - 3 mm x 55 mm x 55 mm
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard
Part Number: DP030-055-CH-1 Dowel Pins - 3 mm x 55 mm x 55 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.000
mm
+ 0.004 / + 0.012 		55.00
mm
+/- 0.600 		55.00
mm
+/ - 0.600 		1048112 | DP030-055-CH-1 --- Dowel Pins - 3 mm x 55 mm x 55 mm
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP030-055-CH-1 Dowel Pins - 3 mm x 55 mm x 55 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.000
mm
+ 0.004 / + 0.012 		60.00
mm
+/- 0.600 		60.00
mm
+/ - 0.600 		1 (Chamfer One End)
1048126 | DP030-060-CH-1 --- Dowel Pins - 3 mm x 60 mm x 60 mm
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard
Part Number: DP030-060-CH-1 Dowel Pins - 3 mm x 60 mm x 60 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.000
mm
+ 0.004 / + 0.012 		60.00
mm
+/- 0.600 		60.00
mm
+/ - 0.600 		1048126 | DP030-060-CH-1 --- Dowel Pins - 3 mm x 60 mm x 60 mm
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP030-060-CH-1 Dowel Pins - 3 mm x 60 mm x 60 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		2.39
mm
+/- 0.254 		2.39
mm
+/ - 0.254 		1 (Chamfer One End)
1049069 | DP032-002-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 2.39 mm x 2.39 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-002-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 2.39 mm x 2.39 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
3.175
mm
+ 0.004 / + 0.012 		2.39
mm
+/- 0.254 		2.39
mm
+/ - 0.254 		1049069 | DP032-002-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 2.39 mm x 2.39 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-002-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 2.39 mm x 2.39 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		3.18
mm
+/- 0.254 		3.18
mm
+/ - 0.254 		1 (Chamfer One End)
1049169 | DP032-003-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 3.18 mm x 3.18 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-003-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 3.18 mm x 3.18 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
3.175
mm
+ 0.004 / + 0.012 		3.18
mm
+/- 0.254 		3.18
mm
+/ - 0.254 		1049169 | DP032-003-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 3.18 mm x 3.18 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-003-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 3.18 mm x 3.18 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		3.96
mm
+/- 0.254 		3.96
mm
+/ - 0.254 		1 (Chamfer One End)
Spina di centraggio 3,175 x 3,96 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 50)
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 3,96 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 50) Spina di centraggio 3,175 x 3,96 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 50) / Pins
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		3.96
mm
+/- 0.254 		3.96
mm
+/ - 0.254 		Spina di centraggio 3,175 x 3,96 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 50)
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 3,96 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 50) Spina di centraggio 3,175 x 3,96 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 50) / Pins
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		4.75
mm
+/- 0.254 		4.75
mm
+/ - 0.254 		2 (Chamfer Both Ends)
1049184 | DP032-005-416-2 --- Dowel Pins - 3.175 mm x 4.75 mm x 4.75 mm
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard
Part Number: DP032-005-416-2 Dowel Pins - 3.175 mm x 4.75 mm x 4.75 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		4.75
mm
+/- 0.254 		4.75
mm
+/ - 0.254 		1049184 | DP032-005-416-2 --- Dowel Pins - 3.175 mm x 4.75 mm x 4.75 mm
Material: Stainless Steel AISI 416 Rc 36-42    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard
Part Number: DP032-005-416-2 Dowel Pins - 3.175 mm x 4.75 mm x 4.75 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		4.78
mm
+/- 0.254 		4.78
mm
+/ - 0.254 		1 (Chamfer One End)
1049272 | DP032-005-303-1 --- Dowel Pins - 3.175 mm x 4.78 mm x 4.78 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-005-303-1 Dowel Pins - 3.175 mm x 4.78 mm x 4.78 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		4.78
mm
+/- 0.254 		4.78
mm
+/ - 0.254 		1049272 | DP032-005-303-1 --- Dowel Pins - 3.175 mm x 4.78 mm x 4.78 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-005-303-1 Dowel Pins - 3.175 mm x 4.78 mm x 4.78 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		5.56
mm
+/- 0.254 		5.56
mm
+/ - 0.254 		1 (Chamfer One End)
1049296 | DP032-006-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 5.56 mm x 5.56 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-006-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 5.56 mm x 5.56 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
3.175
mm
+ 0.004 / + 0.012 		5.56
mm
+/- 0.254 		5.56
mm
+/ - 0.254 		1049296 | DP032-006-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 5.56 mm x 5.56 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-006-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 5.56 mm x 5.56 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		6.35
mm
+/- 0.254 		6.35
mm
+/ - 0.254 		1 (Chamfer One End)
1049476 | DP032-007-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 6.35 mm x 6.35 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-007-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 6.35 mm x 6.35 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
3.175
mm
+ 0.004 / + 0.012 		6.35
mm
+/- 0.254 		6.35
mm
+/ - 0.254 		1049476 | DP032-007-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 6.35 mm x 6.35 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-007-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 6.35 mm x 6.35 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		6.35
mm
+/- 0.254 		6.35
mm
+/ - 0.254 		1 (Chamfer One End)
Spina di centraggio 3,175 x 6,35 mm - Estremità smussata in acciaio legato - DIN6325/ISO 8734 - NoCor (confezione da 1)
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 6,35 mm - Estremità smussata in acciaio legato - DIN6325/ISO 8734 - NoCor (confezione da 1) Spina di centraggio 3,175 x 6,35 mm - Estremità smussata in acciaio legato - DIN6325/ISO 8734 - NoCor (confezione da 1) / Pins
6 units (30 pcs) Available Immediately | Further orders can be expected around Thu, Apr 10, 2025
$3.77 AUD
$3.77 AUD
Per 5
3.175
mm
+ 0.004 / + 0.012 		6.35
mm
+/- 0.254 		6.35
mm
+/ - 0.254 		Spina di centraggio 3,175 x 6,35 mm - Estremità smussata in acciaio legato - DIN6325/ISO 8734 - NoCor (confezione da 1)
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 6,35 mm - Estremità smussata in acciaio legato - DIN6325/ISO 8734 - NoCor (confezione da 1) Spina di centraggio 3,175 x 6,35 mm - Estremità smussata in acciaio legato - DIN6325/ISO 8734 - NoCor (confezione da 1) / Pins
6 units (30 pcs) Available Immediately | Further orders can be expected around Thu, Apr 10, 2025
$3.77 AUD
$3.77 AUD
Per 5
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		6.35
mm
+/- 0.254 		6.35
mm
+/ - 0.254 		2 (Chamfer Both Ends)
1049478 | DP032-006-416-2 --- Dowel Pins - 3.175 mm x 6.35 mm x 6.35 mm
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard
Part Number: DP032-006-416-2 Dowel Pins - 3.175 mm x 6.35 mm x 6.35 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		6.35
mm
+/- 0.254 		6.35
mm
+/ - 0.254 		1049478 | DP032-006-416-2 --- Dowel Pins - 3.175 mm x 6.35 mm x 6.35 mm
Material: Stainless Steel AISI 416 Rc 36-42    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard
Part Number: DP032-006-416-2 Dowel Pins - 3.175 mm x 6.35 mm x 6.35 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		7.92
mm
+/- 0.254 		7.92
mm
+/ - 0.254 		2 (Chamfer Both Ends)
1049557 | DP032-008-416-2 --- Dowel Pins - 3.175 mm x 7.92 mm x 7.92 mm
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard
Part Number: DP032-008-416-2 Dowel Pins - 3.175 mm x 7.92 mm x 7.92 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		7.92
mm
+/- 0.254 		7.92
mm
+/ - 0.254 		1049557 | DP032-008-416-2 --- Dowel Pins - 3.175 mm x 7.92 mm x 7.92 mm
Material: Stainless Steel AISI 416 Rc 36-42    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard
Part Number: DP032-008-416-2 Dowel Pins - 3.175 mm x 7.92 mm x 7.92 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		7.93
mm
+/- 0.254 		7.93
mm
+/ - 0.254 		1 (Chamfer One End)
Spina di centraggio 3,175 x 7,93 mm - Estremità smussata grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 20)
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 7,93 mm - Estremità smussata grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 20) Spina di centraggio 3,175 x 7,93 mm - Estremità smussata grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 20) / Pins
22 units (1100 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.69 AUD
$13.32 AUD $4.69 AUD
Per 50
3.175
mm
+ 0.004 / + 0.012 		7.93
mm
+/- 0.254 		7.93
mm
+/ - 0.254 		Spina di centraggio 3,175 x 7,93 mm - Estremità smussata grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 20)
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 7,93 mm - Estremità smussata grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 20) Spina di centraggio 3,175 x 7,93 mm - Estremità smussata grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 20) / Pins
22 units (1100 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.69 AUD
$13.32 AUD $4.69 AUD
Per 50
3.175
mm
+ 0.004 / + 0.012 		9.53
mm
+/- 0.254 		9.53
mm
+/ - 0.254 		1 (Chamfer One End)
1049982 | DP032-010-416-1 --- Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard
Part Number: DP032-010-416-1 Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		9.53
mm
+/- 0.254 		9.53
mm
+/ - 0.254 		1049982 | DP032-010-416-1 --- Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Material: Stainless Steel AISI 416 Rc 36-42    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-010-416-1 Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		9.53
mm
+/- 0.254 		9.53
mm
+/ - 0.254 		1 (Chamfer One End)
1049983 | DP032-010-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-010-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
3.175
mm
+ 0.004 / + 0.012 		9.53
mm
+/- 0.254 		9.53
mm
+/ - 0.254 		1049983 | DP032-010-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-010-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		9.53
mm
+/- 0.254 		9.53
mm
+/ - 0.254 		1 (Chamfer One End)
Spina di centraggio 3,175 x 9,53 mm - Estremità smussata Grado inossidabile 316 - DIN6325 / ISO 8734 - NoCor (confezione da 50)
Material: Stainless Steel 316 (Similar to A4, 18-10)   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 9,53 mm - Estremità smussata Grado inossidabile 316 - DIN6325 / ISO 8734 - NoCor (confezione da 50) Spina di centraggio 3,175 x 9,53 mm - Estremità smussata Grado inossidabile 316 - DIN6325 / ISO 8734 - NoCor (confezione da 50) / Pins
Out of Stock | Backorder Now | Orders can be expected around Thu, Apr 10, 2025
$70.41 AUD
$70.41 AUD
Per 50
3.175
mm
+ 0.004 / + 0.012 		9.53
mm
+/- 0.254 		9.53
mm
+/ - 0.254 		Spina di centraggio 3,175 x 9,53 mm - Estremità smussata Grado inossidabile 316 - DIN6325 / ISO 8734 - NoCor (confezione da 50)
Material: Stainless Steel 316 (Similar to A4, 18-10)    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 9,53 mm - Estremità smussata Grado inossidabile 316 - DIN6325 / ISO 8734 - NoCor (confezione da 50) Spina di centraggio 3,175 x 9,53 mm - Estremità smussata Grado inossidabile 316 - DIN6325 / ISO 8734 - NoCor (confezione da 50) / Pins
Out of Stock | Backorder Now | Orders can be expected around Thu, Apr 10, 2025
$70.41 AUD
$70.41 AUD
Per 50
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		9.53
mm
+/- 0.254 		9.53
mm
+/ - 0.254 		1 (Chamfer One End)
1049985 | DP032-010-CH-1 (50 Pcs) --- Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard
Part Number: DP032-010-CH-1 (50 Pcs) Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Out of Stock | Backorder Now | Orders can be expected around Wed, May 14, 2025
$54.77 AUD
$54.77 AUD
Per 50
3.175
mm
+ 0.004 / + 0.012 		9.53
mm
+/- 0.254 		9.53
mm
+/ - 0.254 		1049985 | DP032-010-CH-1 (50 Pcs) --- Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-010-CH-1 (50 Pcs) Dowel Pins - 3.175 mm x 9.53 mm x 9.53 mm
Out of Stock | Backorder Now | Orders can be expected around Wed, May 14, 2025
$54.77 AUD
$54.77 AUD
Per 50
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		11.10
mm
+/- 0.350 		11.10
mm
+/ - 0.350 		1 (Chamfer One End)
1050012 | DP032-011-416-1 --- Dowel Pins - 3.175 mm x 11.1 mm x 11.1 mm
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard
Part Number: DP032-011-416-1 Dowel Pins - 3.175 mm x 11.1 mm x 11.1 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		11.10
mm
+/- 0.350 		11.10
mm
+/ - 0.350 		1050012 | DP032-011-416-1 --- Dowel Pins - 3.175 mm x 11.1 mm x 11.1 mm
Material: Stainless Steel AISI 416 Rc 36-42    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-011-416-1 Dowel Pins - 3.175 mm x 11.1 mm x 11.1 mm
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		11.13
mm
+/- 0.350 		11.13
mm
+/ - 0.350 		1 (Chamfer One End)
1050018 | DP032-011-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 11.13 mm x 11.13 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-011-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 11.13 mm x 11.13 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
3.175
mm
+ 0.004 / + 0.012 		11.13
mm
+/- 0.350 		11.13
mm
+/ - 0.350 		1050018 | DP032-011-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 11.13 mm x 11.13 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-011-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 11.13 mm x 11.13 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$487.68 AUD
$487.68 AUD
Per 500
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		12.70
mm
+/- 0.350 		12.70
mm
+/ - 0.350 		1 (Chamfer One End)
Spina di centraggio 3,175 x 12,7 mm - Estremità smussata in acciaio legato - DIN6325 / ISO 8734 - NoCor (confezione da 5)
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 12,7 mm - Estremità smussata in acciaio legato - DIN6325 / ISO 8734 - NoCor (confezione da 5) Spina di centraggio 3,175 x 12,7 mm - Estremità smussata in acciaio legato - DIN6325 / ISO 8734 - NoCor (confezione da 5) / Pins
27 units (135 pcs) Available Immediately | Further orders can be expected around Wed, May 14, 2025
$5.77 AUD
$5.77 AUD
Per 5
3.175
mm
+ 0.004 / + 0.012 		12.70
mm
+/- 0.350 		12.70
mm
+/ - 0.350 		Spina di centraggio 3,175 x 12,7 mm - Estremità smussata in acciaio legato - DIN6325 / ISO 8734 - NoCor (confezione da 5)
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 12,7 mm - Estremità smussata in acciaio legato - DIN6325 / ISO 8734 - NoCor (confezione da 5) Spina di centraggio 3,175 x 12,7 mm - Estremità smussata in acciaio legato - DIN6325 / ISO 8734 - NoCor (confezione da 5) / Pins
27 units (135 pcs) Available Immediately | Further orders can be expected around Wed, May 14, 2025
$5.77 AUD
$5.77 AUD
Per 5
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		12.70
mm
+/- 0.350 		12.70
mm
+/ - 0.350 		1 (Chamfer One End)
Spina di centraggio 3,175 x 12,7 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 60)
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 12,7 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 60) Spina di centraggio 3,175 x 12,7 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 60) / Pins
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		12.70
mm
+/- 0.350 		12.70
mm
+/ - 0.350 		Spina di centraggio 3,175 x 12,7 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 60)
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: Spina di centraggio 3,175 x 12,7 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 60) Spina di centraggio 3,175 x 12,7 mm - Estremità smussata Grado inossidabile 303 - DIN6325 / ISO 8734 - NoCor (confezione da 60) / Pins
Contact Us | Item Discontinued - Please contact us if you need a large quantity
3.175
mm
+ 0.004 / + 0.012 		14.28
mm
+/- 0.350 		14.28
mm
+/ - 0.350 		1 (Chamfer One End)
1050090 | DP032-014-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 14.28 mm x 14.28 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-014-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 14.28 mm x 14.28 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$514.77 AUD
$514.77 AUD
Per 500
3.175
mm
+ 0.004 / + 0.012 		14.28
mm
+/- 0.350 		14.28
mm
+/ - 0.350 		1050090 | DP032-014-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 14.28 mm x 14.28 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-014-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 14.28 mm x 14.28 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$514.77 AUD
$514.77 AUD
Per 500
View the product page first if you are unsure.
3.175
mm
+ 0.004 / + 0.012 		15.88
mm
+/- 0.350 		15.88
mm
+/ - 0.350 		1 (Chamfer One End)
1050102 | DP032-016-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 15.88 mm x 15.88 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard
Part Number: DP032-016-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 15.88 mm x 15.88 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$514.77 AUD
$514.77 AUD
Per 500
3.175
mm
+ 0.004 / + 0.012 		15.88
mm
+/- 0.350 		15.88
mm
+/ - 0.350 		1050102 | DP032-016-303-1 (500 Pcs) --- Dowel Pins - 3.175 mm x 15.88 mm x 15.88 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard
Part Number: DP032-016-303-1 (500 Pcs) Dowel Pins - 3.175 mm x 15.88 mm x 15.88 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, May 02, 2025
$514.77 AUD
$514.77 AUD
Per 500
View the product page first if you are unsure.