Collars - Threaded

37 Products in this selection
This is a combined category of Threaded Collars.
Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Collars - Threaded
Additional resources:
Shaft Collars PDF Catalogue
Suits Thread (B) Outside Diameter (A) Width (C) Clamping Screw Size Indicative
Image
3/4-10 UNC (19.05mm)
38.100
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
Collare filettato 3-4-10 UNC x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1)
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: Collare filettato 3-4-10 UNC x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1) Collare filettato 3-4-10 UNC x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1) / Collars
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$21.95 AUD
$21.95 AUD
Each
Suits Thread (B) Outside Diameter (A) Width (C) Indicative
Image
3/4-10 UNC (19.05mm)
38.100
mm 		12.700
mm 		Collare filettato 3-4-10 UNC x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1)
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: Collare filettato 3-4-10 UNC x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1) Collare filettato 3-4-10 UNC x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1) / Collars
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$21.95 AUD
$21.95 AUD
Each
View the product page first if you are unsure.
3/4-16 UNF (19.05mm)
38.100
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1)
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1) Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1) / Collars
2 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$23.14 AUD
$23.14 AUD
Each
3/4-16 UNF (19.05mm)
38.100
mm 		12.700
mm 		Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1)
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1) Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio dolce - Foro filettato - MBA (confezione da 1) / Collars
2 Available Immediately | Further orders can be expected around Fri, Mar 21, 2025
$23.14 AUD
$23.14 AUD
Each
View the product page first if you are unsure.
3/4-16 UNF (19.05mm)
38.100
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio inossidabile - Foro filettato - MBA (confezione da 1)
Material: Stainless Steel   
Category: Collars - Threaded - Clamp Type
Part Number: Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio inossidabile - Foro filettato - MBA (confezione da 1) Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio inossidabile - Foro filettato - MBA (confezione da 1) / Collars
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$42.86 AUD
$42.86 AUD
Each
3/4-16 UNF (19.05mm)
38.100
mm 		12.700
mm 		Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio inossidabile - Foro filettato - MBA (confezione da 1)
Material: Stainless Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio inossidabile - Foro filettato - MBA (confezione da 1) Collare filettato 3-4-16 UNF x 38,1 x 12,7 mm - Morsetto monopezzo in acciaio inossidabile - Foro filettato - MBA (confezione da 1) / Collars
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$42.86 AUD
$42.86 AUD
Each
View the product page first if you are unsure.
7/8-9 UNC (22.23mm)
41.275
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
1129476 | COT-02223C-041-13-CS --- Threaded Collars - 7/8-9 UNC (22.23mm) x 41.275 mm x 12.7 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02223C-041-13-CS Threaded Collars - 7/8-9 UNC (22.23mm) x 41.275 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$27.77 AUD
$27.77 AUD
Each
7/8-9 UNC (22.23mm)
41.275
mm 		12.700
mm 		1129476 | COT-02223C-041-13-CS --- Threaded Collars - 7/8-9 UNC (22.23mm) x 41.275 mm x 12.7 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02223C-041-13-CS Threaded Collars - 7/8-9 UNC (22.23mm) x 41.275 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$27.77 AUD
$27.77 AUD
Each
View the product page first if you are unsure.
7/8-14 UNF (22.23mm)
41.275
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
1129601 | COT-02223F-041-13-CS --- Threaded Collars - 7/8-14 UNF (22.23mm) x 41.275 mm x 12.7 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02223F-041-13-CS Threaded Collars - 7/8-14 UNF (22.23mm) x 41.275 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$17.14 AUD
$17.14 AUD
Each
7/8-14 UNF (22.23mm)
41.275
mm 		12.700
mm 		1129601 | COT-02223F-041-13-CS --- Threaded Collars - 7/8-14 UNF (22.23mm) x 41.275 mm x 12.7 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02223F-041-13-CS Threaded Collars - 7/8-14 UNF (22.23mm) x 41.275 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$17.14 AUD
$17.14 AUD
Each
View the product page first if you are unsure.
1-8 UNC (25.4mm)
44.450
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
1136110 | COT-02540C-044-13-CS --- Threaded Collars - 1-8 UNC (25.4mm) x 44.45 mm x 12.7 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02540C-044-13-CS Threaded Collars - 1-8 UNC (25.4mm) x 44.45 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$19.77 AUD
$19.77 AUD
Each
1-8 UNC (25.4mm)
44.450
mm 		12.700
mm 		1136110 | COT-02540C-044-13-CS --- Threaded Collars - 1-8 UNC (25.4mm) x 44.45 mm x 12.7 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02540C-044-13-CS Threaded Collars - 1-8 UNC (25.4mm) x 44.45 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$19.77 AUD
$19.77 AUD
Each
View the product page first if you are unsure.
1-12 UNF (25.4mm)
44.450
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
1136743 | COT-02540F-044-13-CS --- Threaded Collars - 1-12 UNF (25.4mm) x 44.45 mm x 12.7 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02540F-044-13-CS Threaded Collars - 1-12 UNF (25.4mm) x 44.45 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$25.41 AUD
$25.41 AUD
Each
1-12 UNF (25.4mm)
44.450
mm 		12.700
mm 		1136743 | COT-02540F-044-13-CS --- Threaded Collars - 1-12 UNF (25.4mm) x 44.45 mm x 12.7 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02540F-044-13-CS Threaded Collars - 1-12 UNF (25.4mm) x 44.45 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$25.41 AUD
$25.41 AUD
Each
View the product page first if you are unsure.
1-14 UNS (25.4mm)
44.450
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
1136778 | COT-02540S-044-13-CS --- Threaded Collars - 1-14 UNS (25.4mm) x 44.45 mm x 12.7 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02540S-044-13-CS Threaded Collars - 1-14 UNS (25.4mm) x 44.45 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$27.68 AUD
$27.68 AUD
Each
1-14 UNS (25.4mm)
44.450
mm 		12.700
mm 		1136778 | COT-02540S-044-13-CS --- Threaded Collars - 1-14 UNS (25.4mm) x 44.45 mm x 12.7 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02540S-044-13-CS Threaded Collars - 1-14 UNS (25.4mm) x 44.45 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$27.68 AUD
$27.68 AUD
Each
View the product page first if you are unsure.
1.1/8-12 UNF (28.58mm)
47.625
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
1139934 | COT-02858F-048-13-CS --- Threaded Collars - 1.1/8-12 UNF (28.58mm) x 47.625 mm x 12.7 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02858F-048-13-CS Threaded Collars - 1.1/8-12 UNF (28.58mm) x 47.625 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$35.23 AUD
$35.23 AUD
Each
1.1/8-12 UNF (28.58mm)
47.625
mm 		12.700
mm 		1139934 | COT-02858F-048-13-CS --- Threaded Collars - 1.1/8-12 UNF (28.58mm) x 47.625 mm x 12.7 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-02858F-048-13-CS Threaded Collars - 1.1/8-12 UNF (28.58mm) x 47.625 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$35.23 AUD
$35.23 AUD
Each
View the product page first if you are unsure.
1.1/4-7 UNC (31.75mm)
52.388
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
1144532 | COT-03175C-052-13-CS --- Threaded Collars - 1.1/4-7 UNC (31.75mm) x 52.388 mm x 12.7 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-03175C-052-13-CS Threaded Collars - 1.1/4-7 UNC (31.75mm) x 52.388 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$17.05 AUD
$17.05 AUD
Each
1.1/4-7 UNC (31.75mm)
52.388
mm 		12.700
mm 		1144532 | COT-03175C-052-13-CS --- Threaded Collars - 1.1/4-7 UNC (31.75mm) x 52.388 mm x 12.7 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-03175C-052-13-CS Threaded Collars - 1.1/4-7 UNC (31.75mm) x 52.388 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Wed, Apr 02, 2025
$17.05 AUD
$17.05 AUD
Each
View the product page first if you are unsure.
1.1/4-12 UNF (31.75mm)
52.388
mm 		12.700
mm 		1/4-28 UNF (6.35mm)
1144772 | COT-03178F-052-13-CS --- Threaded Collars - 1.1/4-12 UNF (31.75mm) x 52.388 mm x 12.7 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-03178F-052-13-CS Threaded Collars - 1.1/4-12 UNF (31.75mm) x 52.388 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$34.86 AUD
$34.86 AUD
Each
1.1/4-12 UNF (31.75mm)
52.388
mm 		12.700
mm 		1144772 | COT-03178F-052-13-CS --- Threaded Collars - 1.1/4-12 UNF (31.75mm) x 52.388 mm x 12.7 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-03178F-052-13-CS Threaded Collars - 1.1/4-12 UNF (31.75mm) x 52.388 mm x 12.7 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$34.86 AUD
$34.86 AUD
Each
View the product page first if you are unsure.
1.1/2-12 UNF (38.1mm)
60.325
mm 		14.288
mm 		1/4-28 UNF (6.35mm)
1152254 | COT-03810F-060-14-CS --- Threaded Collars - 1.1/2-12 UNF (38.1mm) x 60.325 mm x 14.288 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-03810F-060-14-CS Threaded Collars - 1.1/2-12 UNF (38.1mm) x 60.325 mm x 14.288 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$38.50 AUD
$38.50 AUD
Each
1.1/2-12 UNF (38.1mm)
60.325
mm 		14.288
mm 		1152254 | COT-03810F-060-14-CS --- Threaded Collars - 1.1/2-12 UNF (38.1mm) x 60.325 mm x 14.288 mm
Material: Steel    Clamping Screw Size: 1/4-28 UNF (6.35mm)   
Category: Collars - Threaded - Clamp Type
Part Number: COT-03810F-060-14-CS Threaded Collars - 1.1/2-12 UNF (38.1mm) x 60.325 mm x 14.288 mm
Out of Stock | Backorder Now | Orders can be expected around Fri, Mar 21, 2025
$38.50 AUD
$38.50 AUD
Each
View the product page first if you are unsure.
2-12 UNF (50.8mm)
76.2
mm 		17.463
mm 		5/16-24 UNF
1178366 | COT-05080F-076-17-CS --- Threaded Collars - 2-12 UNF (50.8mm) x 76.2 mm x 17.463 mm
Material: Steel   
Category: Collars - Threaded - Clamp Type
Part Number: COT-05080F-076-17-CS Threaded Collars - 2-12 UNF (50.8mm) x 76.2 mm x 17.463 mm
Out of Stock | Backorder Now | Orders can be expected around Sun, Apr 06, 2025
$123.41 AUD
$123.41 AUD
Each
2-12 UNF (50.8mm)
76.2
mm 		17.463
mm 		1178366 | COT-05080F-076-17-CS --- Threaded Collars - 2-12 UNF (50.8mm) x 76.2 mm x 17.463 mm
Material: Steel    Clamping Screw Size: 5/16-24 UNF   
Category: Collars - Threaded - Clamp Type
Part Number: COT-05080F-076-17-CS Threaded Collars - 2-12 UNF (50.8mm) x 76.2 mm x 17.463 mm
Out of Stock | Backorder Now | Orders can be expected around Sun, Apr 06, 2025
$123.41 AUD
$123.41 AUD
Each
View the product page first if you are unsure.