Circlips - Internal - Bevelled

Circlips - Internal   Circlips - Internal - Bevelled
73 Products In this Selection
N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).
A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall.
Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part.
Used in greasy or oily environments.
Housing Bore (B) Clip Thickness (T) Groove Dia. (G) Free Outside Dia (D) Groove Width (W) Indicative
Image
234.95
mm 		4.62
mm
+0.20/-0.00 		249.89
mm
+/-0.08 		254.30
mm
+4.60/-0.00 		3.84
mm
+0.08/-0.00 		1211084 | CIB-23495-C --- Circlips - 234.95 mm x 4.62 mm x 249.89 mm
Material: Spring Steel    Radial Wall (S) min/max: 7.59 - 15.88 mm    Tool: PRR-I150   
Part Number: CIB-23495-C Circlips - 234.95 mm x 4.62 mm x 249.89 mm
Contact Us
Item Discontinued - Please contact us if you need a large quantity
Housing Bore (B) Clip Thickness (T) Groove Dia. (G) Free Outside Dia (D) Indicative
Image
234.95
mm 		4.62
mm
+0.20/-0.00 		249.89
mm
+/-0.08 		254.30
mm
+4.60/-0.00 		1211084 | CIB-23495-C --- Circlips - 234.95 mm x 4.62 mm x 249.89 mm
Material: Spring Steel    Groove Width (W): 3.84 mm +0.08/-0.00   Radial Wall (S) min/max: 7.59 - 15.88 mm    Tool: PRR-I150   
Part Number: CIB-23495-C Circlips - 234.95 mm x 4.62 mm x 249.89 mm
Contact Us
Item Discontinued - Please contact us if you need a large quantity |