Belts - Metric Timing - 10.000mm Pitch - T10 - 16mm Wide

129 Products in this selection
  • T Series Metric Timing Belts.
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
  • Tooth Length (T) - 3.25mm.
  • Tooth Height (H) - 2.50mm.
  • Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
  • Pitch (P) - 10.000mm
Additional resources:
Timing Belts Catalogue PDF
Idler Pulleys
T 10 Timing Pulleys
Teeth Length Width Reinforcement Appearance Indicative
Image
180
Nr. 		1800
mm 		6.0
mm 		Fibreglass
 Black
 1205758 | B-100T-0180-0150-NFB --- Belts - 180 Teeth x 1800 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords   
Part Number: B-100T-0180-0150-NFB Belts - 180 Teeth x 1800 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$30.32 AUD
$30.32 AUD
Each
Teeth Length Width Indicative
Image
180
Nr. 		1800
mm 		6.0
mm 		1205758 | B-100T-0180-0150-NFB --- Belts - 180 Teeth x 1800 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black   
Part Number: B-100T-0180-0150-NFB Belts - 180 Teeth x 1800 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$30.32 AUD
$30.32 AUD
Each
180
Nr. 		1800
mm 		6.0
mm 		Steel
 Black
 1205761 | B-100T-0180-0160-PSB --- Belts - 180 Teeth x 1800 mm x 6 mm
Material: Polyurethane with Steel Cords    Breaking Strength: 4352 N   
Part Number: B-100T-0180-0160-PSB Belts - 180 Teeth x 1800 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$85.50 AUD
$85.50 AUD
Each
180
Nr. 		1800
mm 		6.0
mm 		1205761 | B-100T-0180-0160-PSB --- Belts - 180 Teeth x 1800 mm x 6 mm
Material: Polyurethane with Steel Cords    Reinforcement: Steel    Appearance: Black    Breaking Strength: 4352 N   
Part Number: B-100T-0180-0160-PSB Belts - 180 Teeth x 1800 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$85.50 AUD
$85.50 AUD
Each
188
Nr. 		1880
mm 		6.0
mm 		Fibreglass
 Black
 1206404 | B-100T-0188-0150-NFB (4 Pcs) --- Belts - 188 Teeth x 1880 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords   
Part Number: B-100T-0188-0150-NFB (4 Pcs) Belts - 188 Teeth x 1880 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$107.86 AUD
$107.86 AUD
Per 4
188
Nr. 		1880
mm 		6.0
mm 		1206404 | B-100T-0188-0150-NFB (4 Pcs) --- Belts - 188 Teeth x 1880 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black   
Part Number: B-100T-0188-0150-NFB (4 Pcs) Belts - 188 Teeth x 1880 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$107.86 AUD
$107.86 AUD
Per 4
188
Nr. 		1880
mm 		6.0
mm 		Steel
 Black
 Cinghia dentata 188 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1)
Material: Polyurethane with Steel Cords    Breaking Strength: 4352 N   
Part Number: Cinghia dentata 188 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) Cinghia dentata 188 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$85.50 AUD
$85.50 AUD
Each
188
Nr. 		1880
mm 		6.0
mm 		Cinghia dentata 188 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1)
Material: Polyurethane with Steel Cords    Reinforcement: Steel    Appearance: Black    Breaking Strength: 4352 N   
Part Number: Cinghia dentata 188 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) Cinghia dentata 188 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$85.50 AUD
$85.50 AUD
Each
196
Nr. 		1960
mm 		6.0
mm 		Fibreglass
 Black
 1207526 | B-100T-0196-0150-NFB (4 Pcs) --- Belts - 196 Teeth x 1960 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords   
Part Number: B-100T-0196-0150-NFB (4 Pcs) Belts - 196 Teeth x 1960 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$112.23 AUD
$112.23 AUD
Per 4
196
Nr. 		1960
mm 		6.0
mm 		1207526 | B-100T-0196-0150-NFB (4 Pcs) --- Belts - 196 Teeth x 1960 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black   
Part Number: B-100T-0196-0150-NFB (4 Pcs) Belts - 196 Teeth x 1960 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$112.23 AUD
$112.23 AUD
Per 4
196
Nr. 		1960
mm 		6.0
mm 		Steel
 Black
 Cinghia dentata 196 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1)
Material: Polyurethane with Steel Cords    Breaking Strength: 4352 N   
Part Number: Cinghia dentata 196 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) Cinghia dentata 196 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$87.32 AUD
$87.32 AUD
Each
196
Nr. 		1960
mm 		6.0
mm 		Cinghia dentata 196 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1)
Material: Polyurethane with Steel Cords    Reinforcement: Steel    Appearance: Black    Breaking Strength: 4352 N   
Part Number: Cinghia dentata 196 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) Cinghia dentata 196 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$87.32 AUD
$87.32 AUD
Each
202
Nr. 		2020
mm 		6.0
mm 		Fibreglass
 Black
 1208388 | B-100T-0202-0150-NFB (4 Pcs) --- Belts - 202 Teeth x 2020 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords   
Part Number: B-100T-0202-0150-NFB (4 Pcs) Belts - 202 Teeth x 2020 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$115.50 AUD
$115.50 AUD
Per 4
202
Nr. 		2020
mm 		6.0
mm 		1208388 | B-100T-0202-0150-NFB (4 Pcs) --- Belts - 202 Teeth x 2020 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black   
Part Number: B-100T-0202-0150-NFB (4 Pcs) Belts - 202 Teeth x 2020 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$115.50 AUD
$115.50 AUD
Per 4
225
Nr. 		2250
mm 		6.0
mm 		Steel
 Black
 Cinghia dentata 225 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1)
Material: Polyurethane with Steel Cords    Breaking Strength: 4352 N   
Part Number: Cinghia dentata 225 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) Cinghia dentata 225 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$98.50 AUD
$98.50 AUD
Each
225
Nr. 		2250
mm 		6.0
mm 		Cinghia dentata 225 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1)
Material: Polyurethane with Steel Cords    Reinforcement: Steel    Appearance: Black    Breaking Strength: 4352 N   
Part Number: Cinghia dentata 225 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) Cinghia dentata 225 denti, larghezza 16 mm, poliuretano metrico con corde in acciaio, nera, passo trapezoidale T10 da 10 mm, MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$98.50 AUD
$98.50 AUD
Each
330
Nr. 		3300
mm 		6.0
mm 		Fibreglass
 Black
 1216309 | B-100T-0330-0150-NFB (4 Pcs) --- Belts - 330 Teeth x 3300 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords   
Part Number: B-100T-0330-0150-NFB (4 Pcs) Belts - 330 Teeth x 3300 mm x 6 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$202.50 AUD
$202.50 AUD
Per 4
330
Nr. 		3300
mm 		6.0
mm 		1216309 | B-100T-0330-0150-NFB (4 Pcs) --- Belts - 330 Teeth x 3300 mm x 6 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black   
Part Number: B-100T-0330-0150-NFB (4 Pcs) Belts - 330 Teeth x 3300 mm x 6 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$202.50 AUD
$202.50 AUD
Per 4