Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided

218 Products in this selection
  • Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
  • Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
  • Tooth Length (T) - 1.40mm.
  • Tooth Height (H) - 1.30mm.
  • Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm.
  • Pitch (P) - 5.080mm (0.200 inch)
Additional resources:
Timing Belts Catalogue PDF
Timing Pulleys Catalogue
Teeth Length Width Reinforcement Appearance Indicative
Image
117
Nr. 		594.36
mm 		9.5
mm 		Fibreglass
 Black
 1192825 | B-XL-0117-0095-NFB --- Belts - 117 Teeth x 594.36 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0117-0095-NFB Belts - 117 Teeth x 594.36 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.23 AUD
$8.23 AUD
Each
Teeth Length Width Indicative
Image
117
Nr. 		594.36
mm 		9.5
mm 		1192825 | B-XL-0117-0095-NFB --- Belts - 117 Teeth x 594.36 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0117-0095-NFB Belts - 117 Teeth x 594.36 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.23 AUD
$8.23 AUD
Each
118
Nr. 		599.44
mm 		9.5
mm 		Fibreglass
 Black
 1193013 | B-XL-0118-0095-NFB --- Belts - 118 Teeth x 599.44 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0118-0095-NFB Belts - 118 Teeth x 599.44 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.23 AUD
$8.23 AUD
Each
118
Nr. 		599.44
mm 		9.5
mm 		1193013 | B-XL-0118-0095-NFB --- Belts - 118 Teeth x 599.44 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0118-0095-NFB Belts - 118 Teeth x 599.44 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.23 AUD
$8.23 AUD
Each
119
Nr. 		604.52
mm 		9.5
mm 		Fibreglass
 Black
 1193095 | B-XL-0119-0095-NFB --- Belts - 119 Teeth x 604.52 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords   
Part Number: B-XL-0119-0095-NFB Belts - 119 Teeth x 604.52 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$5.59 AUD
$5.59 AUD
Each
119
Nr. 		604.52
mm 		9.5
mm 		1193095 | B-XL-0119-0095-NFB --- Belts - 119 Teeth x 604.52 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black   
Part Number: B-XL-0119-0095-NFB Belts - 119 Teeth x 604.52 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$5.59 AUD
$5.59 AUD
Each
120
Nr. 		609.6
mm 		9.5
mm 		Fibreglass
 Black
 1193970 | B-XL-0120-0095-NFB --- Belts - 120 Teeth x 609.6 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0120-0095-NFB Belts - 120 Teeth x 609.6 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.86 AUD
$8.86 AUD
Each
120
Nr. 		609.6
mm 		9.5
mm 		1193970 | B-XL-0120-0095-NFB --- Belts - 120 Teeth x 609.6 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0120-0095-NFB Belts - 120 Teeth x 609.6 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.86 AUD
$8.86 AUD
Each
122
Nr. 		619.76
mm 		9.5
mm 		Fibreglass
 Black
 1194556 | B-XL-0122-0095-NFB --- Belts - 122 Teeth x 619.76 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0122-0095-NFB Belts - 122 Teeth x 619.76 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.23 AUD
$6.23 AUD
Each
122
Nr. 		619.76
mm 		9.5
mm 		1194556 | B-XL-0122-0095-NFB --- Belts - 122 Teeth x 619.76 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0122-0095-NFB Belts - 122 Teeth x 619.76 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.23 AUD
$6.23 AUD
Each
123
Nr. 		624.84
mm 		9.5
mm 		Fibreglass
 Black
 1194686 | B-XL-0123-0095-NFB --- Belts - 123 Teeth x 624.84 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0123-0095-NFB Belts - 123 Teeth x 624.84 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.50 AUD
$8.50 AUD
Each
123
Nr. 		624.84
mm 		9.5
mm 		1194686 | B-XL-0123-0095-NFB --- Belts - 123 Teeth x 624.84 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0123-0095-NFB Belts - 123 Teeth x 624.84 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.50 AUD
$8.50 AUD
Each
124
Nr. 		629.92
mm 		9.5
mm 		Fibreglass
 Black
 1194830 | B-XL-0124-0095-NFB --- Belts - 124 Teeth x 629.92 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0124-0095-NFB Belts - 124 Teeth x 629.92 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.23 AUD
$6.23 AUD
Each
124
Nr. 		629.92
mm 		9.5
mm 		1194830 | B-XL-0124-0095-NFB --- Belts - 124 Teeth x 629.92 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0124-0095-NFB Belts - 124 Teeth x 629.92 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.23 AUD
$6.23 AUD
Each
125
Nr. 		635
mm 		9.5
mm 		Fibreglass
 Black
 1195211 | B-XL-0125-0095-NFB --- Belts - 125 Teeth x 635 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0125-0095-NFB Belts - 125 Teeth x 635 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
125
Nr. 		635
mm 		9.5
mm 		1195211 | B-XL-0125-0095-NFB --- Belts - 125 Teeth x 635 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0125-0095-NFB Belts - 125 Teeth x 635 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
126
Nr. 		640.08
mm 		9.5
mm 		Fibreglass
 Black
 1195389 | B-XL-0126-0095-NFB --- Belts - 126 Teeth x 640.08 mm x 9.5 mm
Material: Nylon Covered Neoprene    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0126-0095-NFB Belts - 126 Teeth x 640.08 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$9.14 AUD
$9.14 AUD
Each
126
Nr. 		640.08
mm 		9.5
mm 		1195389 | B-XL-0126-0095-NFB --- Belts - 126 Teeth x 640.08 mm x 9.5 mm
Material: Nylon Covered Neoprene    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0126-0095-NFB Belts - 126 Teeth x 640.08 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$9.14 AUD
$9.14 AUD
Each
127
Nr. 		645.16
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 127 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 127 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 127 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
127
Nr. 		645.16
mm 		9.5
mm 		Cinghia dentata 127 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 127 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 127 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nero - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
128
Nr. 		650.24
mm 		9.5
mm 		Fibreglass
 Black
 1195960 | B-XL-0128-0095-NFB --- Belts - 128 Teeth x 650.24 mm x 9.5 mm
Material: Nylon Covered Neoprene    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0128-0095-NFB Belts - 128 Teeth x 650.24 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$6.23 AUD
$6.23 AUD
Each
128
Nr. 		650.24
mm 		9.5
mm 		1195960 | B-XL-0128-0095-NFB --- Belts - 128 Teeth x 650.24 mm x 9.5 mm
Material: Nylon Covered Neoprene    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0128-0095-NFB Belts - 128 Teeth x 650.24 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$6.23 AUD
$6.23 AUD
Each
129
Nr. 		655.32
mm 		9.5
mm 		Fibreglass
 Black
 1196065 | B-XL-0129-0095-NFB --- Belts - 129 Teeth x 655.32 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0129-0095-NFB Belts - 129 Teeth x 655.32 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.50 AUD
$8.50 AUD
Each
129
Nr. 		655.32
mm 		9.5
mm 		1196065 | B-XL-0129-0095-NFB --- Belts - 129 Teeth x 655.32 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0129-0095-NFB Belts - 129 Teeth x 655.32 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.50 AUD
$8.50 AUD
Each
130
Nr. 		660.4
mm 		9.5
mm 		Fibreglass
 Black
 1196743 | B-XL-0130-0095-NFB --- Belts - 130 Teeth x 660.4 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0130-0095-NFB Belts - 130 Teeth x 660.4 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
130
Nr. 		660.4
mm 		9.5
mm 		1196743 | B-XL-0130-0095-NFB --- Belts - 130 Teeth x 660.4 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0130-0095-NFB Belts - 130 Teeth x 660.4 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
131
Nr. 		665.48
mm 		9.5
mm 		Fibreglass
 Black
 1196872 | B-XL-0131-0095-NFB --- Belts - 131 Teeth x 665.48 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0131-0095-NFB Belts - 131 Teeth x 665.48 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
131
Nr. 		665.48
mm 		9.5
mm 		1196872 | B-XL-0131-0095-NFB --- Belts - 131 Teeth x 665.48 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0131-0095-NFB Belts - 131 Teeth x 665.48 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
132
Nr. 		670.56
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 132 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 132 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 132 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
132
Nr. 		670.56
mm 		9.5
mm 		Cinghia dentata 132 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 132 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 132 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
133
Nr. 		675.64
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 133 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 133 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 133 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
133
Nr. 		675.64
mm 		9.5
mm 		Cinghia dentata 133 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 133 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 133 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
134
Nr. 		680.72
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 134 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 134 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 134 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.50 AUD
$8.50 AUD
Each
134
Nr. 		680.72
mm 		9.5
mm 		Cinghia dentata 134 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 134 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 134 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.50 AUD
$8.50 AUD
Each
135
Nr. 		685.8
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 135 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 135 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 135 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
135
Nr. 		685.8
mm 		9.5
mm 		Cinghia dentata 135 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 135 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 135 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$8.95 AUD
$8.95 AUD
Each
136
Nr. 		690.88
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 136 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 136 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 136 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Sun, Jan 19, 2025
$17.41 AUD
$17.41 AUD
Each
136
Nr. 		690.88
mm 		9.5
mm 		Cinghia dentata 136 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 136 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 136 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Sun, Jan 19, 2025
$17.41 AUD
$17.41 AUD
Each
137
Nr. 		695.96
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 137 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 137 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 137 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$10.23 AUD
$10.23 AUD
Each
137
Nr. 		695.96
mm 		9.5
mm 		Cinghia dentata 137 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 137 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) Cinghia dentata 137 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 pollici) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$10.23 AUD
$10.23 AUD
Each
138
Nr. 		701.04
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 138 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 138 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 138 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$9.50 AUD
$9.50 AUD
Each
138
Nr. 		701.04
mm 		9.5
mm 		Cinghia dentata 138 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 138 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 138 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$9.50 AUD
$9.50 AUD
Each
139
Nr. 		706.12
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 139 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 139 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 139 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$12.77 AUD
$12.77 AUD
Each
139
Nr. 		706.12
mm 		9.5
mm 		Cinghia dentata 139 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 139 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 139 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$12.77 AUD
$12.77 AUD
Each
140
Nr. 		711.2
mm 		9.5
mm 		Fibreglass
 Black
 Cinghia dentata 140 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 140 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 140 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$10.14 AUD
$10.14 AUD
Each
140
Nr. 		711.2
mm 		9.5
mm 		Cinghia dentata 140 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1)
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: Cinghia dentata 140 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) Cinghia dentata 140 denti larga 9,5 mm - Neoprene rivestito in nylon imperiale con cavi in ​​fibra di vetro - Nera - Passo trapezoidale XL da 5,08 mm (1/5 di pollice) - MBA (confezione da 1) / Belts
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$10.14 AUD
$10.14 AUD
Each
141
Nr. 		716.28
mm 		9.5
mm 		Fibreglass
 Black
 1199012 | B-XL-0141-0095-NFB --- Belts - 141 Teeth x 716.28 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0141-0095-NFB Belts - 141 Teeth x 716.28 mm x 9.5 mm
Out of Stock
Backorder Now | Backorders for more can be expected around Fri, Jan 10, 2025
$9.50 AUD
$9.50 AUD
Each
141
Nr. 		716.28
mm 		9.5
mm 		1199012 | B-XL-0141-0095-NFB --- Belts - 141 Teeth x 716.28 mm x 9.5 mm
Material: Nylon Covered Neoprene with Fibreglass Cords    Reinforcement: Fibreglass    Appearance: Black    Breaking Strength: 1505 N    Min Temperature: -34 Deg C    Max Temperature: 85 Deg C    Tooth Angle (A): 50 Deg.   
Part Number: B-XL-0141-0095-NFB Belts - 141 Teeth x 716.28 mm x 9.5 mm
Out of Stock
Backorder Now | | Backorders for more can be expected around Fri, Jan 10, 2025
$9.50 AUD
$9.50 AUD
Each